MULTIBRACKETS 5605 Wall Bracket

famaritana

• vokatra: MULTIBRACKETS 5605 Universal Wall Bracket / Long Reach Arm Mount
• Karazana: Full-motion articulating TV wall mount (dual arm long-reach swivel)
• loko: Famaranana metaly mainty
• Fitaovana: Heavy-duty solid steel construction
• Screen Compatibility: Fits most flat-panel TVs 65″ – 110″ diagonal
• Max screen diagonal: ~279 cm (110″)
• Weight Capacity: Up to 125 kg (~275 lbs) load support
• Fanohanana VESA: Compatible with most VESA patterns from 100×100 mm up to 800×600 mm
• Movement & Adjustment: Full-motion swivel, tilt, and rotate at multiple pivot points
• Saran'ny fitongilana: approx. -5° to +10°
• Swivel/rotation: approximately 60° to +60°
• Extension from wall: up to 980 mm (~38.6″)
• Toetoetra:
  • Dual long-reach arms for flexible viewamin'ny toerana
  • Smart cable management system to hide cables
  • Partially pre-assembled with a full hardware kit included
• Karazana fametrahana: Wall mount, articulating bracket
• loko: Mainty

ZAVA-DEHIBE!
Your Plasma. LCD. TV, Projector, Projector Screen, or other HiFi equipment represents a considerable value.
If screws are Included they may not be suitable for the material of your wall, ceiling, or floor. Replace the screws with suitable ones if needed.
In case you are unsure regarding any aspects or the mounting of this product,t please
Manoro hevitra amin'ny matihanina.

fampitandremana!
foana check ny LALINA of ny lavaka TALOHAN'NY HERINANDRON'NY an fametrahana.

Fits most 65″-110″ flat panel TV

• Weight capacity: 125kg/275 lbs
• VESA compliance: 100×100 200×200 300×300 400×200 400×400 600×400 800×600

FAMPITANDREMANA 
Ny ratra manokana sy ny fahasimban'ny fananana dia mety ho vokatry ny fametrahana na ny fanangonana tsy mety. Vakio tsara ity fampitandremana manaraka ity alohan’ny hanombohany.

• Ny vokatra dia tsy maintsy apetraka amin'ny matihanina.
• Raha tsy azonao ny toromarika na manana ahiahy na fanontaniana dia mifandraisa amin'ny installer eo an-toerana mahafeno fepetra.
• Aza mametraka na manangona raha toa ka simba na tsy hita ny vokatra na fitaovana. Raha mila kojakoja fanoloana ianao dia mifandraisa amin'ny mpaninjara eo an-toerana mba hahazoana fanampiana.
• This product fits most65″-11D”LCD and plasma screens; maximum weight of LCD /plasma screen: 125kg.
• This product has been designed for use on masonry (solid concrete, 2000 PSI density minimum).
• For safe installation. The wall you are mounting to must support a minimum of 3 times the weight of the total load (the mount, the TV, and all accessories).
• Aza mampiasa ity vokatra ity ho an'ny fampiharana hafa noho ny natao tany am-boalohany.
• This product contains moving parts; please use it with caution.
• When installing a flat panel display, please do not damage the electrical wiring or the power source.
• Ny mpanamboatra dia tsy tompon'andraikitra amin'ny fametahana ny rindrina mitsangana, na ny fahavoazana sendrasendra na vokatr'izany.
• Ny mpanamboatra dia mandà izay tompon'andraikitra amin'ny fanovana, ny fametrahana tsy mety, na ny fametrahana mihoatra ny lanja voatondro.
• The manufacturer will not be liable for any damages arising out of the use of, or inabilityto use, the product.

Lisitra taloha

INSTALATION

INSTALLATION OPTION 1: Wood Stud Installation (Suitable for 16″ or 24″ apart studs)

1. Use a stud finder to locate the drywall studs and mark the desired installation locations with a pencil.
2. Ampifandraiso amin'ny rindrina amin'ny rindrina ny Template Plate Wall (BB) amin'ny toerana fametrahana azy.
3. Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level, and mark 6 lag bolt installation locations on the stencil and the wall. Attempt to locate the lag bolt locations in the middle of the studs.
4. Use a 7/32″ (5.5mm) drill bit to drill a pilot hole in the wall with a depth of at least 2.6″ (65mm).

Please note that failure to drill pilot holes may result in the lag bolt heads snapping during installation.

Secure the Wall Plate to the wall with 6 x Lag Bolts ( H) and 6 x Washers (H).

FANAMARIHANA: Do not use Wall Anchor (I) for wood stud installation.

SAFIDY INSTALATION 2: Fametrahana Rindrina Beton/Brick

1. Ampifandraiso amin'ny rindrina amin'ny rindrina ny Template Plate Wall (BB) amin'ny toerana fametrahana azy.
2. Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level, and mark 6 lag bolt installation locations on the stencil and the wall.
3. Use a 3/8″ (10 mm) drill bit to drill a pilot hole in the wall with a depth of at least 2.6″ (65mm). Please note that failure to drill pilot holes may result in the lag bolt heads snapping during installation.

Ampidiro ao anaty lavaka ny 6 x Wall Vatofantsika (I). Ampifandraiso amin'ny rindrina miaraka amin'ny 6 x Lag Bolts (H) ary 6 x Washers (H) ny takelaka rindrina amin'ny rindrina.

This full motion TV wall mount comes with a sliding mechanism that allows the arms and the TV to slide horizontally left or right for up to 15. 7 inches, while the wall plate is stationary on the wall. This feature allows the TV to be placed at an optimal position, regardless of the position of the wall studs. The mount will ship with the locking bars installed in place at their center position. If the sliding function will be used, take off the locking plates by removing the bolts that hold them in place.

Place the top locking bar at the desired position to fix the left slide limit of the arms, and place the bottom bar at the desired position to fix the right side limit of the arms. The raised metal piece at the end of the locking bars limits the slide of the arms. Ensure the locking bars are oriented correctly to ensure both the left and right side locking bars correctly limit the slide. Ensure both of the bolts are tightened at each locking bar’s position to prevent the arms from sliding off the wall plate.

FAMPITANDREMANA: FAILURE TO INSTALL THE LOCKING BARS ADEQUATELY MAY RESULT IN THE ARMS AND THE TV FROM SLIDING OFF THE WALL PLATE.

Attaching the TV to the Mount (For Displays With Smaller Bolt Hole Patterns)
For TVs with smaller bolt hole patterns of VESA 100×100, 100×200, 200×100, and 200x200mm, the TV can be mounted directly on the plate, without the extension bars.

Fametrahana ny TV amin'ny Tendrombohitra (Ho an'ny fampisehoana miaraka amin'ny Lavaka Bolt Lavaka lehibe kokoa) Ho an'ny fahitalavitra manana lamina bolt lavaka lehibe kokoa an'ny VESA 300 × 300,400 × 200,400 × 400,600 × 400, 800 × 600 mm, ampiasao ny fonon-telefaonina sy ny bara fanitarana mba hametrahana ny TV mankany amin'ny tendrombohitra.

Attach the 2 x TV Brackets to the back of the TV by using screws A+E, B+E, C+E, or Dor G.

FANAMARIHANA: The hardware packet provided fits most TVs in the market. If your TV requires different hardware, please contact us at mount-it.com to procure additional hardware kits.

Ensure the screws are adequately engaged with the screw holes on the TV.
Do not overtighten the screws. Ensure the TV brackets sit flat with the back of the T.V.

Hangina g TV On The Wall Mount Arms

Lift the TV (two persons recommended) and hang the TV brackets onto the wall mount extension bars.

Fiarovana ny TV eo an-tendrombohitra

Secure the TV brackets on the mount by attaching the 4 x AA Safety Brackets with 4 x F Screws as shown ointhe image.

FANAMARIHANA: Ny tsy firaharahiana ny fonon-televiziona amin'ny tendrombohitra miaraka amin'ny AA Safety Brackets dia mety hiafara amin'ny fanalana tsy nahy ny fahitalavitra amin'ny bara fanitarana, mety hiteraka fahasimbana ara-batana na fananana.

Fanitsiana leveling -5° – +5°
The mount allows up to 5 degrees of leveling adjustment post installation. To adjust the level of the TV, place a bubble level on top of the TV, loosen the 2 x G bolts located behind the VESA plate, level the TV, and tighten the 2 x G bolts to lock the TV in position.

Fanitsiana mitongilana -5° – +10°

The mount can tilt down up to 10 degrees and up 5 degrees. To adjust the tilt angle of the TV, pull out the tilt adjustment levers on both sides of the mount and turn counterclockwise to loosen the screws. Adjust the tilt to the desired angle and turn the tilt adjustment lever clockwise to tighten the screws.

FANAMARIHANA: IF THE TV TILTS DOWN AFTER A PERIOD OF USE, CHECK THE TILT ADJUSTMENT LEVER TIGHTNESS AND TIGHTEN IF NECESSARY.

Ampiasao ireo clips fitantanana tariby mitambatra eo amin'ny sandry mba handefasana tariby mankany aoriana na sisin'ny fahitalavitra.

lafiny

Karatra fiantohana

MULTIBRACKETS “™ voafetra Garantie

Multibrackets alàlana NY Products ny be maimaim-poana of kilema in KEVITRA SY hafa HO AN'NY ny ny vokatra Garantie Vanim-potoana.

ny Garantie NANOMBOKA TEO manomboka on ny tamin'ny fototra Purchase daty of ny vokatra

rehetra Multibrackets Products Moa VOAKASIKY by a voafetra vokatra antoka

• DIMY (5) taona HO AN'NY metaly Video manara-maso mounts, rEHETRA racksSY non-electrical Mitrosa Accessories
• rOA (2) taona HO AN'NY gaslifts SY sit-stand toeram-piasana
• IRAY (1) TAOM- HO AN'NY rEHETRA maotera ary/na mandeha ho azy vokatra, plastika MPANDAHATENY mounts, rEHETRA MPANDAHATENY stands, rEHETRA fanaka, rEHETRAHAZO (MDF) Accessories

HO AN'NY antoka fanambarana VOAVOATRA NANDRITRA ny Garantie Vanim-potoana, marofononteny mahitsy Hanao Soloy misy tsininy vokatra anjara maimaim-poana of charge. Should a anjara on NY Multibrackets vokatra fail, Mba miangavy re MANANGANA anRMA tranga on www.multibrackets.com/support ny manao a antokaFitarainana. We Hanao await NY tahirin-kevitra SY DIA discuss nyOLANA amin'ny ianao, SY , indray mandeha we confirm ny vokatra is ambany ADYranty, we Hanao sambo fanoloana faritra ny ianao. izany voafetra GarantieMoa ve tsy MATOAN-DAHATSORATRA ny vola lany of manala SY fanoloana tsininy faritraFrom NY Multibrackets vokatra. Noho izany, if NY OLANA TAKIN'I aFANAMBOARANA NY SIMBA technician, ianao TSY mAINTSY KARAMANY misy asa fiampangana.

For warranty claims made during the Warranty Period, MULTI BRACKETS will replace any defective product part free of charge. Should a part of your Multibrackets product fail, please create an RMA case on www.multibrackets.com/support to make a warranty claim. We will await your documentation and then discuss the problem with you, and once we confirm the product is under warranty, we will ship replacement parts to you. This

Limited Warranty does not cover the costs of removing and replacing defective parts from your Multibrackets product. So, if your problem requires arepair technician, you must pay any labor charg.es This Limited Warranty extends only to the original purchaser of the product and is automatically void if your Multibrackets product is modified in any way, improperly installed, taxed beyond its stated weight capacity, or otherwise misused or abused.

All Multibrackets products are intended for indoor use only, and any outdoor use voids this Limited Warranty. The Limited Warranty for wall and ceiling mounts is void if the mount is moved from its initial installation. To the maximum extent permitted by applicable law, Multibrackets disclaims any other warranties, express or implied, including warranties of fitness for a particular purpose and warranties of merchantability. Multibrackets will not be liable for any damages whatsoever arising out of the use or inability to use itsproducts, even if Multibrackets has been advised of the possibility of such damages. To the maximum extent permitted by applicablelaw, Multibrackets disclaims any responsibility for incidental or consequential damages,

Multibrackets M Stockholm, Sweden 2016. www.multibrackets.com

The content of this manual is subject to Change wltheut further notice. The latest vers, on of this manual can be found online under the product name on the webtranokala: www.multibrackets.com

 

Documents / Loharano

MULTIBRACKETS 5605 Wall Bracket [pdf] Torolàlana fametrahana 5605 Wall Bracket, 5605, Wall Bracket, Wall Bracket, Wall, Bracket

References

• User Manual