LED Controller
(Multi-Zone)

M1C Wireless Controller

The Mini Pro Series LED Remote Control adopts RF 2.4GHz wireless transmission technology, with a maximum control distance of up to 30 meters (in an unobstructed environment).
When paired with the P5 Controller, one controller is compatible with 5-channel output and supports five types of lamps: DIM, CT, RGB, RGBW, and RGBCW. Within the effective control range, one remote control can control an unlimited number of controllers,  and realize functions such as light on/off, brightness adjustment, color temperature tuning, RGB static color selection, dynamic mode effects activation, and scene recall—meeting users’ needs for different lighting applications.
For zone control: One remote control can manage multiple zones, and multiple controllers can be coded into the same zone to achieve group control of that zone. Pressing the master on/off key of the remote control once can turn on/off the lights in all zones.

Paramètre ara-teknika

MODELY	M1C	M1D	M2C	M2D	M4C	M4D	M5C	M5D
loko	White	Mainty	White	Mainty	White	Mainty	White	Mainty
Dimotra Type	pahina		CT		RGB/ RGBW		RGBCW
Karazana Wireless	RF 2.4GHz
Miasa voltage	3Vdc (Button battery CR2032×1)
Current standby	<2uA
Lavitra lavitra	30M (Under unobstructed conditions)
Mpanara-maso mifanentana	P1、P2、P3、P4、 P5		P2、P3、P4、 P5		P3、P4、 P5		P5
Temp miasa.	-25 ℃ ~ 50 ℃
lanja	40g±10g
lafiny	104×58×9mm (remote)，108×63×14mm (remote+hold)

lafiny

Fametrahana vokatra

Fomba roa hanamboarana ny mpihazona lavitra:

1. Amboary amin'ny visy roa ny fihazonana lavitra eo amin'ny rindrina.
2. Amboary amin'ny adhesive 3M ny fihazonana lavitra amin'ny rindrina.

Bateria solony

Button Functions

Dimming Remote Control M1C/M1D

Faritra 1,2,3,4:
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).

Master Power: Turns all lights on or off.
Zone 1, 2, 3, 4: Short press to turn on and select the current zone’s light; long press to turn off the current zone’s light.
Brightness Touch Ring: Touch to change the brightness of the current zone’s light.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
Scene: Short press to recall the scene; long press for 3 seconds to save the current light state of the selected Zone to the scene.

Color Temperature Remote Control M2C/M2D

Zona 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Brightness Touch Ring: Touch to change the color temperature of the current Zone’s light.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 consecutive levels.
Scene: Short press to recall the scene; long press for 3 seconds to save the current light state of the selected Zone to the scene.

Button Functions
RGB/RGBW Remote Control M4C/M4D

Zona 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Touch Color Ring: Touch the RGB color ring to select a color.
Mode/Speed: Short press to switch dynamic modes; long press to adjust speed;
Short press both “1” and “4” Zone keys simultaneously to cycle through dynamic modes.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
White Light: For RGBW lights, short press to turn the W channel on or off; long press for 1-6 seconds to continuously adjust the W brightness.
Scene: Short press to recall the scene; long press for 3 seconds to save the current lighting state to the scene.

RGBCW Remote Control M5C/M5D

Zona 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Touch Color Ring: Touch the color temperature/RGB color ring to select a color.
Mode/Speed: Short press to switch dynamic modes; long press to adjust speed;
Short press both “1” and “4” Zone keys simultaneously to cycle through dynamic modes.
Color Temperature: Short press to turn the current Zone’s color temperature channel on/off; touch the color ring to switch to the color temperature touch ring; Long press to adjust the brightness of the current color temperature.
RGB: Short press to turn the current Zone’s RGB channel on/off; touch the color ring to switch to the RGB touch ring;
Long press to adjust the brightness of the current color.
Scene: Short press to recall the scene; long press for 3 seconds to save the current lighting state to the scene.

loko	R/G/B values
MENA	R100%   G0%   B0%
MAVO	R100%   G100%   B0%
Maitso	R0%   G100%   B0%
Cyan	R0%   G100%   B100%
Manga	R0%   G0%   B100%
LAMBA VOLOMPARASY	R100%   G0%   B100%
White	R100%   G100%   B100%

Fomba dynamic	Red-purple gradient	Fomba static	MENA
	Blue-purple gradient
	Color temperature gradient (warm yellow, cool white)		Maitso
	Three-color gradient (RGB)
	Six-color gradient (red, green, blue, yellow, purple, cyan)		Manga
	Seven colors changing (red, green, blue, yellow, purple, cyan, white)		MAVO
	Seven-color gradient (red, green, blue, yellow, purple, cyan, white)		LAMBA VOLOMPARASY
	Three-color gradient (RGB)		Cyan
	White gradually brightens and darkens		Mixed light white

Wiring Diagram

Used with P-series controllers

Fampiarahana kaody
Key pairing code

1. Short press the controller’s ID learning button. The load indicator will start flashing. Please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Multi-Zone remote control: Press and hold the Master Power button until the remote indicator flashes slowly. Press the desired Zone button until the load indicator flashes quickly and stays on and the color ring changes. Pairing complete.

Power-on code pairing

1. After the controller powers off and back on, please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Multi-Zone remote control: Press and hold the Master Power button until the remote indicator flashes slowly. Press the desired Zone button until the load indicator flashes quickly and stays on and the color ring changes. Pairing complete.

Fanamarihana: One controller can be paired with a maximum of 10 remote controllers. If more than 10 remote controllers are paired, the ID code of the first remote controller will be automatically deleted.

Hamafana kaody
To delete all remote controls: Press and hold the controller ID learning button for 6 seconds. The controller load light will flash 4 times quickly and then stay on, indicating successful code clearing.

Use the remote controls together
Code pairing (assuming B learns from A)

1. Simultaneously press and hold the top two buttons on remote control B until the indicator light stays on, then release.
2. Within 5 seconds, press any button on remote control A. The indicator light on remote control B will turn off, indicating successful learning.
   *Remote controls of the same model can learn from each other.

Hamafana kaody
Simultaneously press and hold the top two buttons on the remote control for 6 seconds until the indicator light flashes twice, indicating successful code clearing.

Toe-jiro famantarana

• When the light is on, press any button, and the remote control’s indicator light will turn red.
• If no button is pressed for 6 seconds, the remote control will enter sleep mode. To exit sleep mode, press any button.

Fanamarihana: If the LED light does not turn on when the button is pressed, the battery may be dead. Please replace the battery in a timely manner.

Fitaterana sy fitahirizana

1. Fitaovam-pitaterana
   Ny vokatra dia azo alefa amin'ny fiara, sambo ary fiaramanidina.
   Mandritra ny fitaterana dia tokony harovana amin'ny orana sy ny masoandro ny vokatra. Azafady mba ialao ny fahatairana mafy sy ny hovitrovitra mandritra ny dingan'ny fampidinana entana.
2. fitahirizana
   Ny fepetra fitahirizana dia tokony hifanaraka amin'ny Fenitry ny tontolo iainana Class I. Ireo vokatra voatahiry nandritra ny enim-bolana mahery dia atolotra hojerena indray ary tsy azo ampiasaina raha tsy efa mahafeno fepetra.

Attentions

• Azafady ampiasao amin'ny tontolo maina anatiny;
• Rehefa mametraka ny bateria, azafady ampifandraiso tsara ny terminal tsara sy ratsy. Raha tsy ampiasaina mandritra ny fotoana maharitra ny lavitr'ezaka, esory ny bateria;
• Rehefa fohy ny halavirana lavitra ary na tsy mandeha matetika ny lavitra, azafady ovay ara-potoana ny bateria;
• Mba raiso tsara ary apetraho mba hisorohana ny fianjerana izay miteraka fahasimbana;
• Raha misy lesoka dia aza manandrana manamboatra vokatra irery. Raha manana fanontaniana ianao dia mifandraisa amin'ny mpamatsy anao.
  ※ This manual is subject to changes without further notice. Product functions depend on the goods. Please feel free to contact our official distributors if you have any question.

Fifanarahana Warranty

• Vanim-potoana fiantohana manomboka amin'ny daty fanaterana: 5 taona.
• Ny serivisy fanamboarana na fanoloana maimaim-poana ho an'ny olana momba ny kalitao dia omena ao anatin'ny fe-potoana fiantohana.

Fanilihana Warranty etsy ambany:

Ny fepetra manaraka ireto dia tsy ao anatin'ny sahan'asa fiantohana ny fanamboarana na fanoloana maimaim-poana:

• Mihoatra ny fe-potoana fiantohana;
• Izay fahasimbana artifisialy ateraky ny voltage, enta-mavesatra, na asa tsy mety;
• Vokatra misy fahasimbana ara-batana mafy;
• Fahavoazana vokatry ny loza voajanahary sy force majeure;
• Simba ny etikety garantie sy ny barcode.
• No any contract signed by our company.
  1. Repair or replacement provided is the only remedy for customers. Our company is not liable for any incidental or consequential damage unless it is within the law.
  2. Our company has the right to amend or adjust the terms of this warranty, and release in written form shall prevail.

FAMPITANDREMANA

• LOZA INTSONY: Ity vokatra ity dia misy sela bokotra na bateria vola madinika.
• Mety hisy ny fahafatesana na ny ratra mafy raha atsipy.
• Ny sela bokotra na vola madinika voatelina dia mety hiteraka may ao anatin'ny adiny 2.
• ATAOVY TSY HO TAFAKA NY ANKIZY ny bateria vaovao sy efa nampiasaina
• Mitadiava fitsaboana haingana raha misy bateria ahiana ho voatelina na ampidirina ao anatin'ny faritra rehetra amin'ny vatana.

a) Esory ary avereno avy hatrany na ario ny bateria efa nampiasaina araka ny fepetra eo an-toerana ary alaviro ny ankizy. AZA manary ny bateria any amin'ny fako ao an-trano na mandoro.
b) Na ny bateria efa nampiasaina aza dia mety hiteraka ratra mafy na fahafatesana.
c) Antsoy ivon-toerana fanaraha-maso ny poizina eo an-toerana mba hahazoana fampahalalana momba ny fitsaboana.
d) The compatible battery type: CR2032.
e) Ny bateria nominal voltage: 3vc.
f) Ny bateria tsy azo averina dia tsy azo averina.
g) Aza manery ny fandroahana, ny recharge, ny disassemble, ny hafanana ambony (ny mari-pana voatondron'ny mpanamboatra) na ny fandoroana. Ny fanaovana izany dia mety hiteraka ratra vokatry ny fivoahana, ny fivoahana na ny fipoahana ka miteraka may simika.
h) Ataovy azo antoka fa napetraka araka ny tokony ho izy ny bateria araka ny polarity (+ sy -).
i) Aza afangaro ny batterie taloha sy vaovao, marika na karazana batterie, toy ny alkaline, carbon-zinc, na bateria azo averina.
j) Esory ary avereno avy hatrany na ario ny bateria amin'ny fitaovana tsy ampiasaina mandritra ny fotoana maharitra araka ny fepetra eo an-toerana.
k) Arovy tanteraka ny efitrefitra bateria. Raha toa ka tsy mihidy tsara ny efitry ny bateria, atsaharo ny fampiasana ilay vokatra, esory ny bateria, ary arovy amin'ny ankizy.

Documents / Loharano

LTECH M1C Wireless Controller [pdf] Boky torolalana M1C, M1D, M2C, M2D, M4C, 4D, M5C, M5D, 301, A3, M1C Wireless Controller, M1C, Wireless Controller, Controller

References

• User Manual