HONGWEI MICROELECTRONICS ESP32 C3 Development Board Modules Mini Wifi BT Bluetooth Module

fepetra arahana
- vokatra: ESP32 Development Board
- mpanamboatra: Espressif
- mifanentana: Arduino IDE
- Webtranokala: https://www.arduino.cc/en/Main/Software
Torolàlana momba ny fampiasana vokatra
Download Software and Development Board
- Ampidino ny rindrambaiko Arduino IDE avy amin'ny ofisialy webtranokala omena etsy ambony.
- Sokafy ny rindrambaiko Arduino IDE hanombohana ny dingana fananganana.
Add ESP32 Development Environment
- Ao amin'ny Arduino IDE, mandehana mankany File -> Preferences (shortcut key ‘Ctrl+,’).
- Add the JSON address of the ESP32 development board in the board manager settings.
- Click ‘OK’ to confirm and return to the Arduino IDE homepage.
- In the Development Board Manager, search for ESP32 and install the development environment.
Start Downloading and Testing
- Select File -> Eksample -> Blink to download a flashing light program for testing.
- Modify the code as needed, such as changing LED_PIN to the desired pin number.
- Select the corresponding port and development board model in Arduino IDE.
- If the Comport is not recognized, manually enter download mode following the provided methods.
- Click upload and wait for the download to complete. The blue indicator light on the module should flash normally.
Fampandrenesana sy fampandrenesana momba ny zon'ny mpamorona
TAPITRAview


Fampidirana ny singa




- P: power supply; I: input; O: output; T: can be set to high impedance.
- GPIO2, GPIO8, and GPIO9 are the strapping pins of the ESP32-C3FN4 chip. During chip power-on and system reset, the strapping pin controls the chip function according to the binary voltage value of the pin. For the specific description and application of the strapping pins, please refer to the chapter on strapping pins in the ESP32-C3 chip manual.
- The power supply mode is Micro-USB interface power supply (default), 5V and GND pin header power supply, 3 and V3 and GND pin header power supply.
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:

Torolàlana momba ny fandoroana programa
- Alohan'ny hampandehanana dia ataovy azo antoka fa tsy misy dikany ny ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB.
- Tools to prepare: ESP32-C3-MINI-1-TB or ESP32-C3-MINI-1U-TB, USB 2.0 cable (Standard A to Micro-B, computer -Windows, Linux, or macOS. Please make sure to use Appropriate USB cables; some cables are for charging only, not for data transfer and programming.
- Connect the USB data cable, and burn the program from the computer software.
Tantara fanavaozana

Fanontaniana matetika
How do I troubleshoot if the blue indicator light does not flash after uploading?
Check the connection between the development board and your computer, ensure the correct port and board are selected in Arduino IDE, and try re-uploading the program.
Can I use other development environments with this ESP32 board?
While these instructions are tailored for Arduino IDE, you may be able to adapt them for other environments that support ESP32 development.
Documents / Loharano
![]() |
HONGWEI MICROELECTRONICS ESP32 C3 Development Board Modules Mini Wifi BT Bluetooth Module [pdf] Torolàlana ho an'ny mpampiasa ESP32 C3 Board Modules Mini Wifi BT Bluetooth Module, ESP32 C3, Module Board Development Mini Wifi BT Bluetooth Module, Modules Board Mini Wifi BT Bluetooth Module, Wifi BT Bluetooth Module, Module BT Bluetooth, Module Bluetooth |
