FUNLAB FF01 Hall Effect Controller

TAPITRAview

Firefly Pro Controller–Instruction Manual 

Product Specification

Sokajy	famaritana
MODELY	FF01
Medium fandefasana	Bluetooth 2.1
Frequency mpitatitra	2.402-2.480GHz
fifanarahana	Bluetooth BT2.1+EDR
LED	4 LEDs and Multiple Colored Lights
Batterie	Batterie Lithium Polymer 3.7V/950mAh
Fotoam-paharetana	12.5 Hours (Lights Turned Off)
Time Charging	6.3 ora
Working Voltage	3.7V-4.2V
Charging Voltage	5V
Temperature miasa	-10 ° C∼50 ° C
Temperature fitehirizana	-20°c-10°c

Fampiasana on/off an'ny Controller (Eo ambanin'ny Switch Mode)

Fifandraisana an-tariby

Wireless Connection

1. Avy amin'ny Menu HOME, mifidiana Controllers, avy eo Change Grip and Order.
2. Press and hold Y + HOME for 3 seconds, and 4 LED lights flash quickly.
   The LED(s) are becoming stable, pairing finishes.
3. If no pairing for over 2.5 minutes, it shuts down by itself.
4. If paired and no operation for over 5 mins, shuts down by itself. (No movement on the sensor).

Fifohazana asa: Press the Home Button, and then the console in the sleep state can be woken up and connected again.

Fomba fampandehanana sy famantarana LED (fampifandraisana)

Fomba fampiarahana

• Combination Pairing: In the off state, press and hold the following key combination to enter the Pairing Mode.
• Android Mode: A+ HOME
  LED2 - LED3 tselatra haingana rehefa mampiaraka, ary LED2 - LED3 mitohy rehefa mampiaraka tsara;
• Safidy fomba: Y + HOME
  LED1 – LED4 flash quickly while pairing, and the console automatically assigns when pairing is successful.
• PC Mode: B + HOME
  LED1 & LED4 flash quickly while pairing, and LEDl & LED4 keep on while pairing successfully;
• iOS Mode: B+ HOME
  Ny LED1 & LED4 dia mitselatra haingana rehefa mampiaraka, ary ny LED1 & LED4 dia mandeha tsara rehefa mampiaraka (Rafitra fanohanana: iOS 13.6 na ambony/iPadOS 13.6 na ambony);
• Steam Deck Mode: Press the “STEAM” Button on the left side of the console – “Settings” -“Bluetooth” to connect
  B + TRANO
• Ny LED1 & LED4 dia mitselatra haingana rehefa mampiaraka, ary mitohy ny LED1 & LED4 rehefa mampiaraka.

Turbo sy AUTO TURBO Function

Amin'ny fomba rehetra

• Ny bokotra dia azo apetraka amin'ny TURBO Function: A/B/X/Y/L/R/ZL/ZR/D-pad Button
• (For the 1st time) Press the TURBO Button+ one of the function buttons to achieve the Manual TURBO Function (Press and hold to launch continuously)
• (For the 2nd time) Press the TURBO Button+ one of the function buttons to achieve the Automatic TURBO Function (Automatically continuous launch)
• (For the 3rd time) Press the TURBO Button+ one of the function buttons to clear the TURBO Function (Clear)
• Fanamarihana: Press and hold the TURBO Button for 5 seconds (if the Vibration intensity is not 0%, there will be a vibration cue ) to clear all TURBO Functions.

Fanitsiana hafainganam-pandeha TURBO (Ambaratonga 3)

• Fomba fanitsiana:
• Press TURBO Button+ “Shake L/R Joystick Up”, increase speed by 1 level;
• Press TURBO Button+ “Shake L/R Joystick Down “, reduce speed by 1 level;

Haingam-pandeha:

1. Alefaso tsy tapaka in-5 isan-tsegondra (Ambaratonga 1);
2. Alefaso tsy tapaka in-12 isan-tsegondra (Ambaratonga 2);
3. Alefaso tsy tapaka in-20 isan-tsegondra (Ambaratonga 3);

Fanitsiana ny hovitrovitra

• Press the Motor Vibration Button on the back of the controller, and you can adjust the Motor Vibration Intensity. Vibration Intensity can be cycled in turn. There are 5 intensities, 100%, 75%, 50%, 25% and 0%.

Reset ny Hardware Controller

• There is a small hole on the back of the controller, and it is the Reset Button. After pressing it, the controller hardware will reset.

Reconnection ny Controller

• When the controller is pairing to the previous device, you only need to press the HOME Button after the controller is in standby, and it will pair to the previous device.

Famantarana fiampangana

• Charging in the OFF State: LED4 flashes slowly, and then turns off while being fully charged;
• Famandrihana raha ampifandraisina amin'ny Switch: Ny jiron'ny fantsona mifanitsy amin'izany dia hikoropaka moramora, ary avy eo dia hitohy rehefa feno.

Lighting Control Instruction (Light Button)

1. Light up the luminous pattern: Press the bokotra.
2. Change the Light Color: Press, bokotra.
   Colors will change each time you press the bokotra.
3. Change the Lighting Mode: Hold the, Initial Mode: Always-on
   1st time-click: breathing light mode
   2nd time-click: quick flash mode
   3rd time-click: vibration lighting mode
   Back to Always-on: turn off and then turn on the light.
4. Turn OFF the light: Hold ny bokotra mandritra ny 5 segondra.
   Turn ON the light: Press ny bokotra.

Macro sy Mapping Function amin'ny Buttons of The Back

Macro Function-Bokotra Macro

• Press and hold the MR Button and don’t loosen (4 LED lights turn on, entering programming), inputting the buttons you want to edit (up to 24 steps). The controller will have the vibration cue after loosening the MR Button and then pressing the XR Button to trigger the Macro Buttons.
• Press and hold the ML Button and don’t loosen (4 LED lights turn on, entering programming), inputting the buttons you want to edit (up to 24 steps). The controller will have the vibration cue after loosening the ML Button and then pressing the XL Button to trigger the Macro Buttons. Buttons that Macro Function could edit are A/B/X/Y/L/R/ZL/ZR/+/-/D-pad Buttons and L/Rjoysti cks (can be used as a combo in the game).

Mapping Function-Bokotra azo zahana

• Press and hold the MR Button and don’t loosen (4 LED lights turn on, entering programming), inputting the single button you want to map. The controller will have the vibration cue after loosening the MR Button and then pressing the XR Button to trigger the Programmable Buttons.
• Press and hold the MR Button and don’t loosen (4 LED lights turn on, entering programming), inputting the single button you want to map. The controller will have the vibration cue after loosening ML Button, and then pressing XL Button to trigger Programmable Buttons; and Buttons that Map ping Function could edit are A/B/X/Y/L/R/ZL/ZR/+/-/D-pad Buttons L/Rjoysti cks.

Fanamarihana:

1. Miaraka amin'ny asa fitadidiana;
2. Press the MR/ML Buttons that set programming, and there is a vibration cue, and then you can clear the Macro and Mapping Function of the XR/XL Buttons.

Keylinker APP Instructions

1. Open the app store and search for “Keylinker” to download the APP.
2. Open the Bluetooth connection handle.
3. APP KEYLINKER BLE appears, click, and connect successfully.
4. Click the settings icon on the right to enter the settings page.
5. You can change the Button in the APP, set the lights, adjust the vibration, etc

MANAMPY

• We promise to provide sustainable services for this controller. You can get more operational guidance support from our service channel and official web:
• Webtranokala: www.funlabswitch.com
• Instagram: funlab_official
• Serivisy: support@funlabswitch.com
• Discord:

Documents / Loharano

FUNLAB FF01 Hall Effect Controller [pdf] Boky torolalana FF01, FF01 Hall Effect Controller, Hall Effect Controller, Effect Controller, Controller

References

• User Manual