Elecrow ESP32 AI Camera Development Board Vision Sensor Board

Ampahany fitaovana

1. Lohatenin'ny mpandahateny
2. RGB Light
3. Al Button
4. Mik
5. Lohatenin'ny UART
6. TF karatra TF
7. Camera
8. Jiro mpanampy
9. Reset Button
10. gazety
11. Port Type-C
12. Power Light
13. Jiro bateria
14. BAT Header

Torolàlana haingana

• Al Button:
  • In “Al Voice” mode, click to toggle the “Standby/Listening” status.
• Reset Key:
  • Single-click to reboot after firmware flashing failure or device malfunction.
• Jiro mahery:
  • The red LED is on steadily when powered.
• Jiro bateria:
  • When powered by the battery, the red light stays on while charging, and the green light stays on when fully charged.

Fanambadiana tambajotra

1. Plug in the Type-C cable to power on.
2. If you want to use the “Al Online” feature, you need to network pair and register the Al Agent first.
3. Open your phone/computer’s WiFi list, click on “Al_Camera_XXXX” to enter WiFi pairing mode.
   • Raha ny webpage does not open automatically, please visit 192.168.4.1 in your browser.
4. Choose an available 2.4GHz WiFi, enter the WiFi password, and click “Save Configuration”.
   • You can see your Wifi in “WiFi Network”.
   • Fanamarihana: If you want to clear your network, open the “Settings” app, then open the “Configure Network”, and click “RECONFIGURE”.
5. Open the “Al Online” app, then open a browser and go to https://portal.thinknode.cc/ to access the Al Hub interface. If this is your first time logging in, you need to click the “Create Account” button to create an account.
6. After the account is successfully created and logged in, you will receive a 5000-point reward.
7. Click the “Al Hub” button to start “Add Agent”.
8. Click “Add Agent” and give your Al Agent a name.
9. Click “Manage devices (0)”, then click “Add Device”, enter the verification code, and confirm.
10. After completing “Add Device”, you can configure the character.
11. If you want to browse “Historical conversations”, you need to first enable “Local Short-term Memory” and save.
    • Fanamarihana: If your 5000 points are used up, you need to click “Recharge” to purchase a plan that will allow you to regain points.

Main Specifications

• Anaran'ny vokatra: Al Camera Module
• Mpanara-maso lehibe ESP32-S3R8
• miseho 1.83-inch TFT-LCD Touch Screen
• teboka 2 MP
• Wireless WiFi & Bluetooth 5.0
• Flash 16MB
• TF karatra TF Manohana hatramin'ny 128GB
• interface tsara UART Interface. IC Pad
• fahan'ny 5V/1A
• lafiny 56.05*44.5*18.6mm
• Temperature miasa -20°C hatramin’ny 65°C

Documents / Loharano

Elecrow ESP32 AI Camera Development Board Vision Sensor Board [pdf] Torolàlana ho an'ny mpampiasa ESP32 AI Camera Development Board Vision Sensor Board, ESP32, AI Camera Development Board Vision Sensor Board, AI Camera Development Board Vision Sensor Board, AI Camera Development Board, Camera Development Board, Vision Sensor Board, Sensor Board

References

• User Manual