CHT SP1133 Wireless Controller User Manual

CHT SP1133 Wireless Controller

Mombamomba ny vokatra

This product is mainly designed for PC and supports NS(Nintendo Switch) mode, BT, and 2.4G dongle for wireless PC gaming controllers. In NS mode, the controller connects to the Switch console via BT. It can also connect wirelessly via BT to Android/iOS devices and laptops. Additionally, it supports wireless connection to desktop PCs via dongle. Compatible with PC systems including XP, WIN7, WIN8, WIN10, and WIN11, the controller supports PC modes: X_INPUT/D_INPUT/NS mode.

Endriky ny vokatra

1. This product mainly features PC functions, including rapid fire, motor vibration adjustment, M1/2 mapping function, and macro functionality.
2. Manome famantarana sata LED efatra: Mena / White / Green / Blue.
3. Bokotra miasa 18 miaraka amin'ny switch mode telo: NS/BT/Dongle, mety amin'ny fampiarahana voalohany.
4. Motera roa naorina, joystick Hall 3D avo lenta; Ny biraon'ny sensor Hall dia manana fiasa fiovam-po, miaraka amin'ny maodely lava manolotra vokatra analoga ary fomba fohy mamoaka mivantana 255.
5. Misy bokotra roa azo zahana M1/M2 ao ambadika, izay azo apetraka ho an'ny asa fanaovana sari-tany sy macro.
6. Tazony ny bokotra +/ – mandritra ny 3 segondra mba hifindra eo amin'ny maody X_input/D_input/NS.
7. Ahitana gyro 6-axis ho an'ny fanidiana tanjona haingana sy marina.
8. Ny Controller dia manohana fifandraisana an-tariby amin'ny PC ho an'ny fanavaozana rindrambaiko ary manohana ny maody X/D-INPUT/NS rehefa mifandray amin'ny tariby sy tsy misy tariby.
9. Ny controller dia misy fiantraikany amin'ny jiro RGB amin'ny lafiny roa, ny lafiny tsirairay dia misy jiro 1615 RGB efatra.
10. The controller is activated through charging, other methods cannot activate it.
11. Raha vao ampiarahina amin'ny console SWITCH/fitaovana Android/IOS/PC ny mpanara-maso, dia hiditra ho azy amin'ny fomba fatoriana izy rehefa afaka 5 minitra tsy mihetsika.
12. Fomba fiampangana: azo alaina amin'ny alàlan'ny seranan-tsambo type-C na amin'ny alàlan'ny dock famandrihana.
13. Ny mpanara-maso dia tsy maintsy manohana ny tahan'ny fifidianana 1000 Hz rehefa mifandray amin'ny alalan'ny tariby amin'ny PC na an-tariby miaraka amin'ny dongle.

Famaritana endri-javatra

1. Two connection methods are available for controllers on a switch console:
   1. Wired connection utilizing a USB data cable.
   2. Wireless BT pairing.

NS(Switch) Mode fifandraisana

1. Controller connection to the Nintendo Switch console: when the controller button on the controller for 3 seconds until the white LED indicator flashes rapidly.Open the pairing menu on the Switch console pairing. Once paired successfully, all controller functions will work normally, and the console-assigned Indicator light will remain steady. If pairing fails, the controller will automatically enter sleep mode after approximately 60 seconds. If pairing is successful but left idle, the controller will automatically sleep after about 5 minutes.
2. Torolàlana an-tariby ho an'ny fampiarahana BT: rehefa avy mifandray amin'ny console Nintendo Switch amin'ny alàlan'ny tariby data USB ny controller dia tsindrio ny bokotra rehetra amin'ny controller hamoha azy. Rehefa tapaka ny tariby data, dia hifandray ho azy amin'ny console Nintendo Switch amin'ny alàlan'ny BT ny mpanara-maso. Hatramin'ny mpanara-maso efatra dia afaka mifandray miaraka amin'ny console NS, miaraka amin'ny jiro famantarana voatendry: LED mena / fotsy / maitso / manga mijanona tsy mitsaha-mirehitra.

BT Mode

1. Supports connection to Android devices/IOS devices/laptops. When the controller is in sleep mode.
   1. BT Connection for Android Devices: turn on the BT settings of your device(e.g., phone, TV). Switch the controller mode to “BT” mode. Press and hold the HOME button on the controller for 3s until the status indicator LED flashes blue rapidly, indicating it has entered pairing mode for Android devices. Hitady ny ny fitaovana BT antsoina hoe "XBOX Wireless Controller" ao amin'ny fitaovanao, dia tsindrio ny hampiaraka sy hifandray. Raha vantany vao vita ny fampiarahana dia hazava ny LED manga.
   2. Bluetooth Connection for iOS Devices: with the controller in sleep mode and the mode switch in the “BT” position, press and hold the HOME button for 3 s. The blue LED will flash rapidly, indicating it has entered pairing mode. Hitady ny the Bluetooth device named “XBOX Wireless Controller” on your iOS device, then click to pair and connect. Once paired successfully, the blue LED will stay lit. The next time you wake the controller by pressing any button (with the mode switch in the “BT” position), it will automatically reconnect to the previously paired Android or iOS device. If pairing is unsuccessful, the controller will enter sleep mode after about 60s. If there is no activity after successful pairing, the controller will enter sleep mode after about 5 min.
   3. Bluetooth Connection for Laptops: With the controller in sleep mode and the mode switch in the “BT” position, press and hold the HOME button for 3 s. The blue LED will flash rapidly, indicating it has entered pairing mode. Hitady ny ny fitaovana Bluetooth antsoina hoe "XBOX Wireless Controller" ao amin'ny solosainao, dia tsindrio ny hampiaraka sy hifandray. Raha vantany vao vita ny fampiarahana dia hazava ny LED manga.

Fomba Dongle:

Ny controller dia manana fomba fifandraisana roa amin'ny 2.4G Dongle:

1. Set the controller mode switch to the dongle position. While the controller is in sleep mode, press and hold the HOME button for 3 seconds until the red LED on the controller flashes rapidly.Plug the dongle into the PC’s USB port, then press the “Pairing” button on the dongle for 3 seconds until the green LED on the dongle flashes rapidly. At this point, the dongle and the controller will pair. Once successfully connected, the green LED on the dongle will stay lit, and the red LED on the controller’s indicator light will also stay lit. If pairing fails, the controller will automatically enter sleep mode after about 60 seconds. If pairing succeeds but there is no activity, the controller will automatically enter sleep mode after about 5 minutes.
2. After the controller is connected to the dongle, it supports X-INPUT functionality by default. The system assigns a solid red indicator LED, and the device name appears as “Xbox Wireless Controller” (PC must have the Xbox 360 driver installed). Press and hold the +/- buttons for 3 seconds to switch to NS mode. The system assigns a solid blue indicator LED, and the device name will be displayed as”XBOX Wireless Controller”.To switch to D-INPUT mode, press and hold the +/- buttons for 3s. The device will be displayed as”XBOX Wireless Controller,” and the controller’s indicator light will stay lit with both red and blue lights.

Fampiasana bokotra "HOME".

Ny controller dia miditra haingana amin'ny fomba torimaso. Rehefa mandeha ny fanaraha-maso dia tsindrio ary tazony ny bokotra "HOME" mandritra ny 5 segondra mba hametrahana ny fanaraha-maso amin'ny fomba torimaso.

Famaritana ny Controller

1. The controller supports wired connection to a PC, with the device name displayed as “Xbox Wireless Controller”(requires Xbox 360 drivers installed on the PC).
2. Tsy manohana ny fanavaozana firmware amin'ny alàlan'ny console Nintendo Switch ny controller. Mila misintona ny logiciel-nay ianao ary mampifandray izany amin'ny PC (Raha toa ka tsy mandeha araka ny tokony ho izy ny fiasa sasany amin'ny fanaraha-maso noho ny fanavaozana ny rafitra Nintendo Switch, azafady mba mifandraisa amin'ny orinasanay mba hahazoana ilay rindrambaiko sy torolalana fanavaozana momba ny fanavaozana firmware).
3. The controller supports wake-up using any key: (excluding L3, R3, M1, M2, and the trigger modeswitch). After waking up, the controller enters the reconnection state. The white and green lights will flash in a flowing pattern. If the controller was previously paired with an NS/BT/receiver (based onthe mode switch position) and the pairing has not been cleared, or if it was paired in another mode,the mode switch will automatically enable the reconnection function.
4. Ny bokotra fanaraha-maso dia misy ny UP, DOWN, LEFT, RIGHT, A, B, X, Y, L, R, ZL, ZR, L3, R3, View button, HOME, Menu button, and “M”-18 functional buttons in total, along with two mapping buttons (M1, M2).It is also equipped with left and right 3D joysticks.
5. Ny controller dia manana fiasa vibration. Ao amin'ny console Nintendo Switch, azonao atao ny mamadika na mamono ny vibration motera amin'ny menu "Settings". Ny controller koa dia manohana ny fanitsiana ny hamafin'ny vibration. Rehefa mifandray amin'ny PC, tadiavo ny bokotra "M" eo amin'ny mpanara-maso ary afindrano miakatra na midina ny joystick 3D havia mba hampitomboana na hampihenana ny hamafin'ny vibration motera. Misy ambaratonga efatra misy: 100% -60% -30% -0%. (Rehefa manitsy ny hovitrovitra maotera amin'ny alalan'ny fihazonana ny bokotra "M", aza mihoatra ny 5 segondra. Ny fikandrana dia voavonjy rehefa maty, ary ny famerenan'ny orinasa dia manidy ny hamafin'ny vibration amin'ny 60%.)
6. Ny bokotra lamosina, M1 sy M2, dia azo amboarina. Ireto bokotra fampiasa manaraka ireto dia azo asiana sari-tany: AVY, AVY, AVY, AVY, A, B, X, Y, L1, R1, ZL, ZR, “-“, “+”, ary ny lalana rehetra amin'ny joystick 3D havia sy havanana.

Dingan-tsarintany:

1. After connecting to NS/BT/Dongle, hold M+M1. The left RGB light will slowly flash white, indicating entry into mapping mode.
2. Indray mandeha amin'ny fomba fanamboarana M1, tsindrio bokotra iray (oh: "A"). Dia tsindrio M1 indray; ny jiro RGB dia hiredareda indray mandeha, manamafy fa ny "A" dia voapetaka amin'ny M1 ankehitriny. Araho ny dingana mitovy amin'ny M2.
3. You can assign multiple function keys to M1 (M2) by holding M + M1 and inputting keys sequentially. When pressed in-game, the macro will execute based on the time intervals between the input keys. Each M1/M2 macro can store up to 16 key inputs. Clearing M1 & M2 Customization: while connected to a Nintendo Switch console or PC, mapping steps to clear the customized feature of M1. The M2 function clearing process is the same as M1. After clearing, the button will have no assigned function.(Custom settings are saved after shutdown; however, a factory reset will remove all custom functions assigned to M1 and M2.)  The Controller Supports A Turbo (rapid-fire) Function (1) hold down the “M” button and press one of the function buttons (A/B/X/Y, L1/R1, ZL/ZR) to enable the rapid-fire function. It will have a turbo function with light indicators. The TURBO button functionality applies to eight keys: A/B/X/Y, L1/R1, ZL/ZR. After setting the rapid-fire function, you can switch between manual rapid-fire, automatic rapid-fire, or single-shot. To cancel the rapid-fire function for a specific key, repeat the steps above or hold down the “M” button for 5 seconds. (2) The controller supports adjustable turbo speed: hold the M button + move the right joystick up/down to adjust the turbo speed between three levels: Fast, Medium, and Slow.(Turbo speed settings and key values are saved after shutdown. However, if a factory reset is performed, any custom functions assigned to the TURBO button and turbo speed settings will be cleared, restoring the default medium speed and single-shot mode.)

Trigger Stop ho an'ny dia fohy na lavitra

Rehefa ao anatin'ny fomba fitsangatsanganana lavitra ny trigger, ny fanerena ny trigger havia na havanana dia manome asa analogue miaraka amin'ny 1 ka hatramin'ny 255, miaraka amin'ny fanehoan-kevitry ny vibration.Rehefa avadika amin'ny fomba fitsangatsanganana fohy ny trigger, ny fanerena ny trigger havia na havanana dia tonga hatrany amin'ny 255, miaraka amin'ny fanehoan-kevitra amin'ny vibration.

Fanitsiana vokatry ny jiro RGB

Torolàlana ho an'ny fampandehanana jiro RGB:

Note: RGB lighting effects can only be adjusted when the controller is connected to the NS console orPC via wired/wireless connection. RGB effects cannot be adjusted while the controller is charging onthe dock.

1. Fomba 1: Fomba avana (default).
2. Mode 2: Lightning mode. In this mode, simultaneously press the left and right 3D buttons once(pause for 100 microseconds) to switch the light color combination.The color changes once with the key combination (L3, R3).
3. Fomba 3: fomba fifohazana amin'ny bisikileta maroloko.
4. Mode 4: In this mode, simultaneously press the left and right 3D buttons once(pause for 100 microseconds) to switch the light color combination. The color changes once with thekey combination (L3, R3).

You can adjust the brightness of the RGB lighting with the following key combinations. There are four levels: 25%, 50%, 75%, and 100% . Decrease RGB brightness: M + left joystick right direction.IncreaseRGB brightness: M + left joystick left direction.Press and hold M + “R3” for 5 seconds to turn off the RGB lighting. Press and hold M + “R3” for 5 seconds again to turn it back on. The current state is saved after powering off. Press the M button + “R3” button briefly (pause for 100 microseconds)once to switch to one RGB lighting effect, cycling through Mode 1, Mode 2, Mode 3, Mode 4, andthen back to Mode 1 (in a loop).(The lighting settings are saved after powering off. Restoring factorysettings will clear the lighting settings, with the default set to Rainbow mode.)

Menu sy bokotra M

1. ny View bokotra / bokotra Menu / bokotra "M" dia ny View function and Menu function when connected to a PC or Android/IOS device. The “M” button has a rapid-fire function and a motor vibration adjustment function. When used with the Nintendo SWITCH console, the View button functions as the “-” button, the Menu button functions as the “+” button, and the “M” button serves as the screenshot function.
2. Mba hampavitrika ny fiasan'ny pikantsary miaraka amin'ny bokotra "M" ao amin'ny console Nintendo Switch dia tsy maintsy tsindriana indroa ny bokotra "M" mba hahafahan'ilay fiasa.

Fametrahana/Famerenana ny asa

1. Charging via adapter: plug the controller into the Type-C port to charge it. The channel light willglow a constant red LED and will switch off once the charging is complete.
2. Famandrihana loharanon-kery: ampifandraiso mivantana ny seranan-tsambo Type-C an'ny mpanara-maso mba hamenoana azy. Ny jiron'ny fantsona dia hamirapiratra LED mena tsy tapaka, ary ho faty ny jiro rehefa feno ny controller.
3. When charging the controller while it is connected to a device, the channel light will display aslowly flashing red LED, and the light will turn off once the controller is fully charged.

Fanairana bateria ambany

Rehefa ny bateria voltage drops below 3.5V, the channel’s red LED will flash rapidly toindicate low battery, signaling that the controller needs to be charged.

Miato

When the controller is powered on, press and hold the “HOME button” for 5s to put the controller into sleep mode. When the controller is in pairing mode, it will automatically enter sleep mode if itfails to pair within 60s. When the controller is connected to the console but remains inactive for approximately 5 min, it will automatically enter sleep mode.

Reset Function

Raha tsy miasa ny controller dia azonao atao ny mamerina azy amin'ny alàlan'ny fanindriana ny bokotra reset amin'ny alàlan'ny lavaka famerenana.

Mandray Distance

Ny halaviran'ny fanaraha-maso mahomby dia ao anatin'ny 10 metatra.

Reference Current

Sleep mode current: Less than 20μA. Pairing current: Less than 45mA.
Ity vokatra ity dia manohana ny famandrihana amin'ny alàlan'ny dock Nintendo SWITCH ary misy fiasa mifoha tsy misy tariby.

Contrôle électriques Specifications

• Famatsiana herinaratra: Batterie polymère naorina
• Fotoana fampiasana: Manodidina ny 6 ka hatramin'ny 8 ora ny fampiasana tsy tapaka
• Fahaizana bateria: 800mAh
• Ora famandrihana: 3 ora eo ho eo
• Charging Voltagny: DC5V
• Charging ankehitriny: 390mA
• Miasa amin'izao fotoana izao: 290mA (Maximum amin'izao fotoana izao rehefa apetraka ho ambony indrindra ny vibration motera sy RGB)

3D Joystick/Gyroscope Factory Calibration

In the controller’s sleep mode, press L3 + R1 to enter joystick and trigger calibration. At this time, the red and green lights will flash alternately. Rotate the joystick forcefully for 2 full circles and press the trigger all the way down 2 times. Then, place the controller on a flat surface and press the A button again to complete the joystick and trigger calibration. The controller will automatically proceed to motion calibration, indicated by a flashing blue light. Once motion calibration is complete,the controller will automatically return to sleep mode.

Fanaraha-maso ny Factory Lock Mode Setting

In the controller’s sleep mode, simultaneously press and hold the left 3D joystick (L3 button), the right 3D joystick (R3 button), and the “M button” for 3 seconds. The indicator lights will all illuminate briefly and then turn off, indicating that the controller has entered factory lock mode. (In factorylock mode, the controller disables the wake-up function for any button, preventing frequent connection issues caused by accidental touches during packaging and transportation.) (After setting the factory lock mode: Defaults to X_input mode.)

Miala amin'ny Factory Lock Mode

When the controller is in factory lock mode, all buttons are disabled for wake-up. To exit “factorymode,” you must charge the controller using a USB data cable at least once. Once charged, thecontroller’s functionality will be restored.

Fanavaozana Firmware Controller

1. If certain functions of the controller become unavailable due to a console system upgrade or if a functional update is required, the controller firmware can be upgraded via a PC. Double-click to openthe software: **”GDF-G560637_74A7_V1.0_250110.exe”** as shown in the figure below:
2. When the controller is in sleep mode or powered on, connect it to the PC using a USB cable . Simultaneously press and hold HOME + X + Y for 3 seconds to enter upgrade mode (the “Online” indicator will turn green). The “Update Firmware” button will change from gray to black. Click “UpdateFirmware” to proceed with the upgrade, as shown in the figure below. This indicates a successful connection.
3. Mandritra ny fizotran'ny fanavaozana, ataovy azo antoka fa mifandray tsara ny tariby data. Rehefa vita ny fanavaozana dia hiseho toy ny amin'ny sary etsy ambany ny fampisehoana:

Dongle firmware upgrade

open receiver software: Customer_GDF-G760326_8DC9_V10_250213a.exe as shown in Figure (A), insert the receiver intothe usb port of the PC, and hold down the receiver “Docking key” for 5 seconds. The receiver enters the upgrade mode and”OFFLINE” turns red and green as shown in Figure B, Click “Update mode” to upgrade the receiver software successfully.

LalaoMacro APP

1. Hametraka GameMacro APP: Sokafy ny findainao na ny takelakao, ampiasao ny WeChat hijerena ny kaody QR, ary alao ny "GameMacro APP".
2. Tadiavo ny anarana Bluetooth mifandraika amin'ny GameMacro ao amin'ny lisitry ny Bluetooth an-telefaona ary mifandray amin'ny mpivady.
3. Rehefa avy niditra ny fampiharana, tsindrio ny "+" kisary eo amin'ny zoro ambony havia, safidio ny mpanara-maso izay vao nifandray tamin'ny rafitra Bluetooth, ary fenoy ny fifandraisana.
4. Ho an'ny fampifandraisana indray dia ataovy izay hahazoana antoka fa efa mitambatra ny rafitra Bluetooth sy ny mpanara-maso. Azonao atao ny misafidy ny fitaovana mifandray teo aloha avy amin'ny lisitry ny tantara mba hifandray indray.
5. Raha toa ka tsy nahomby ny fifandraisana noho ny antony rehetra, dia hipoitra eo amin'ny efijery ny pejin'ny famahana olana. Na azonao atao ny manindry eo amin'ny zoro ambony havanana mba view solutions to frequently asked questions(FAQs). (The solutions will be further improved based on the controller type at a later stage.)

Tsipirian'ny Controller

1. The button test in the controller details section is a physical button test. Pressing the controller buttons allows you to test if the controller is functioning properly. (The button values displayed on the page will vary depending on the actual button values of the controller.)
2. The following are the calibration procedures for the gyroscope, joystick and trigger. Complete eachcalibration within 60 seconds as per the instructions
3. Firmware version and download installation. After downloading a new firmware version, you canalso revert to the old version without affecting the use of the app
4. Macro mode and contact mode. Mode switching can be done not only through the combination keys (the switching combination key method needs to be completed according to thecontroller’s manual), but also through the app. Different modes have different pages and different usage scenarios.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more ofthe following measures:

• Avereno na afindra toerana ny antenne mpandray.
• Ampitomboy ny fisarahana eo amin'ny fitaovana sy ny mpandray.
• Ampifandraiso amin'ny fivoahana amin'ny faritra hafa amin'ny ifandraisan'ny mpandray ny fitaovana.
• Miresaha amin'ny mpivarotra na teknisianina efa za-draharaha amin'ny radio/TV raha mila fanampiana.

Caution: Any changes or modifications to this device not explicitly the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions:

1. Ity fitaovana ity dia mety tsy miteraka fanelingelenana manimba, ary
2. This device must accept any interference received, including interference that may cause undesired operation.The device has been evaluated to meet general RF exposure requirements

FAQs

• F: Ahoana no fomba ifandraisako amin'ny maody X_INPUT, D_INPUT, ary NS amin'ny PC-ko?
  • A: Press and hold the +/- buttons for 3 seconds to switch modes.