1. Fampidirana
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of the RGBlink NDI PTZ Camera Controller (RGBBKT). This device is designed for professional video production environments, offering comprehensive control over various PTZ cameras using multiple protocols.
Image 1.1: RGBlink NDI PTZ Camera Controller (RGBBKT).
2. Fametrahana
Follow these steps to set up your RGBlink NDI PTZ Camera Controller.
2.1 Famoahana sy fisafoana voalohany
- Esory tsara ny singa rehetra amin'ny fonosana.
- Hamarino fa misy ny entana rehetra voatanisa ao amin'ny lisitry ny entana.
- Inspect the controller for any signs of physical damage. If damage is found, contact your dealer immediately.
2.2 Mampifandray ny Controller
The RGBlink NDI PTZ Camera Controller supports various connection methods for power and camera control.
- Power over Ethernet (PoE): Connect a single RJ45 Ethernet cable from a PoE-enabled network switch to the controller's LAN port. This provides both power and network connectivity.
- Adapter hery ivelany: If PoE is not available, connect the provided power adapter to the DC 12V input port and to a power outlet.
- Fifandraisana fakan-tsary:
- Ethernet (IP Control): Connect PTZ cameras to the same network as the controller via RJ45 Ethernet cables. The controller supports VISCA over IP, ONVIF v2.42, and NDI v5.5 protocols.
- Fanaraha-maso mitohy: For cameras supporting serial communication, use RS232, RS422, or RS485 interfaces. Connect the appropriate cables from the controller's serial ports to the cameras.
Image 2.1: Rear panel connections including RS-232, RS-422, LAN (PoE), and Power Input.
Sary 2.2: Eksample connection diagram showing PTZ Controller, PoE Switch, PTZ Cameras, Audio Mixer, and Computer.
Image 2.3: Diagram illustrating IP camera connections via a network switch.
2.3 Fanamboarana ny tambajotra
For IP-based camera control, ensure the controller and cameras are on the same network segment. The controller supports automatic detection of NDI-enabled PTZ cameras.
- Access the controller's web interface tsara amin'ny fampidirana ny adiresy IP ao amin'ny a web browser. (Refer to the device's display or network tools to find the IP address).
- The default login credentials are typically 'admin' with a blank password. It is recommended to set a strong password immediately.
- Ao anatin'ny web interface, configure camera protocols (e.g., ONVIF, VISCA over IP) and enter camera-specific user credentials if required.
Image 2.4: NDI|HX camera search and control interface on the controller.
3. Fampandehanana
This section details the operational functions of the RGBlink NDI PTZ Camera Controller.
3.1 Mihoatraview ny Controls
The controller features a 3.49" LCD display, a 3D joystick, various knobs, and a numeric keypad for intuitive control.
Image 3.1: The controller's 3.49-inch LCD display.
Sary 3.2: Misy antsipiriany view of the 3D joystick and multi-function knobs.
Image 3.3: Layout of the controller's buttons and numeric keypad area.
3.2 Fifidianana fakan-tsary
- Quick Select Buttons: Use the dedicated CAM 1-5 buttons for quick selection of up to 5 cameras.
- Keypad nomerika: For cameras beyond the quick select buttons (up to 255), press the CAM ID button, then enter the camera number using the numeric keypad, and press Ampidiro.
Image 3.4: The controller's ability to manage multiple cameras.
3.3 Fanaraha-maso PTZ
- Joysticks: The 3D joystick controls pan (left/right), tilt (up/down), and zoom (rotate the joystick).
- PT Speed Knob: Adjusts the gimbal movement speed for pan and tilt.
- Zoom Knob: Provides precise zoom control, especially useful in preview fomba.
3.4 Image Parameter Adjustment
- IRIS/SHUTTER Knob: Rotate to adjust aperture and shutter speed. Press to switch control modes.
- R/B GAIN Knob: Rotate to adjust red and blue gain. Press to switch control modes.
- FOCUS Button: Tsindrio ny AUTO FOKUS button to switch the camera to auto focus mode.
- EXPOSURE Button: Cycles through exposure modes (Aperture Priority, Shutter Priority, Gain Priority, Manual Exposure, Auto Exposure).
- Bokotra BACKLIGHT: Toggles the camera's backlight mode.
- WHITE BALANCE CYCLE Button: Cycles through white balance modes (Indoor, Outdoor, Manual, Auto).
- ONE PUSH TRIGGER Button: When white balance is set to "One-Push White Balance", press this button to initiate a one-push white balance calibration.
Image 3.5: Functions of buttons and knobs on the left side of the controller.
Image 3.6: Functions of buttons and knobs on the right side of the controller, including preset controls.
3.5 presets
- SET PRESET Button: Press to enter preset position mode. Use the numeric keys to enter the preset number (0-9) and press Ampidiro mamonjy. mpanao gazety ESC hivoaka.
- CALL PRESET Button: Press to enter preset recall mode. Use the numeric keys to enter the preset number (0-9) and press Ampidiro to recall. Press ESC hivoaka.
- The controller supports saving and recalling up to 255 presets per camera.
3.6 Fikarohana Menu
- Bokotra MENU: Press to open or close the camera settings menu. In menu control mode, the joystick controls navigation (up, down, left, right), Ampidiro confirms selections, and ESC acts as a back button.
4. Fikojakojana
Proper maintenance ensures the longevity and optimal performance of your RGBlink NDI PTZ Camera Controller.
4.1 Fanadiovana
- Use a soft, dry cloth to clean the exterior of the controller.
- Ho an'ny loto mafy loha dia kely dampen the cloth with water or a mild, non-abrasive cleaning solution.
- Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the surface and display.
- Ensure no liquids enter the device through openings or ports.
4.2 Fitehirizana
- When not in use for extended periods, store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
- Arovy amin'ny vovoka sy ny hamandoana ny fitaovana.
5. Famahana olana
Ity fizarana ity dia manome vahaolana amin'ireo olana mahazatra mety ho hitanao.
5.1 Tsy misy hery
- Jereo ny loharanon-kery: Ensure the power adapter is securely connected to both the controller and a working power outlet.
- PoE Check: If using PoE, verify that the Ethernet cable is connected to a PoE-enabled port on your network switch and that the switch is powered on.
- Cable Integrity: Inspect the power cable and Ethernet cable for any damage.
5.2 Cannot Control Camera
- Fifandraisana tambajotra: For IP cameras, ensure the controller and cameras are on the same network and can communicate. Check network cables and IP addresses.
- Protocol tsy mifanaraka: Verify that the correct control protocol (e.g., VISCA over IP, ONVIF, NDI, Pelco-D/P) is selected on both the controller and the camera.
- ID fakan-tsary: Ensure the correct camera ID is selected on the controller.
- Taratasy fidirana: If the camera requires authentication, confirm that the correct username and password are configured in the controller's web interface tsara.
- Serial fifandraisana: For serial control, check RS232/RS422/RS485 cable connections and ensure baud rates and addresses match between the controller and camera.
- Firmware: Ensure both the controller and cameras have the latest firmware installed. Visit the RGBlink support webtranokala ho an'ny fanavaozana.
5.3 LCD Display Issues
- Tsy misy fampisehoana: Ataovy azo antoka fa mandeha ny controller.
- Aseho manjavozavo: Check if there are any brightness settings on the controller that can be adjusted.
6. Famaritana
| endri-javatra | antsipirihany |
|---|---|
| MODELY | RGBBKT |
| refy (L x W x H) | 11.4 x 7.8 x 5.9 santimetatra (tokony ho 290 x 200 x 150 mm) |
| lanja | 2.2 kilao (eo ho eo. 1 kg) |
| miseho | LCD 3.49" |
| Control Protocols | VISCA over IP, ONVIF v2.42, NDI v5.5, Pelco-D/P |
| interface | RS232, RS422, RS485, RJ45 Ethernet (PoE) |
| Camera Capacity | Up to 255 PTZ cameras |
| Fampidirana herinaratra | PoE or DC 12V (external adapter) |
| Joystick | High-precision Hall sensor 3D joystick |
Image 6.1: Controller dimensions and typical usage environments.
Image 6.2: Visual representation of supported protocols including RJ45, RS485, RS422, RS232, ONVIF, NDI, Pelco-D, Pelco-P, and Visca.
7. Fampisehoana Lahatsary momba ny Vokatra
Watch the official product video for a visual demonstration of the RGBlink NDI PTZ Camera Controller's features and operation.
Video 7.1: Official demonstration of the RGBlink PTZ Camera Controller Joystick, showcasing multi-camera control and key features.
8. Warranty sy fanohanana
For warranty information, technical support, or service inquiries, please contact RGBlink customer service or visit their official website.
- Mpanamboatra: Xiamen RGBlink Science & Technology Co.,Ltd.
- Official Webtranokala: www.rgblink.com (Fanamarihana: Ity dia toerana fitehirizana URL, azafady mba jereo ny fonosan'ny vokatrao na ny antontan-taratasy ofisialy raha mila fanohanana marina website.)
- Antsipiriany ifandraisana: Refer to the RGBlink official website for the most current contact details for technical support and warranty claims.