1. Vokatra mihoatraview
The FireAngel SW1-R is a mains-powered optical smoke alarm designed to provide early warning of fire. It features a 9V backup battery to ensure continuous protection during power outages. The alarm emits a loud 85dB sound at 3 meters and includes LED visual indicators for clear alerts.
This optical smoke alarm is particularly effective at detecting slow-burning fires that produce thick white smoke, making it suitable for general living areas.
Lafin-javatra fototra:
- Mains Powered with 9V Battery Backup: Ensures continuous operation even during power failures.
- Optical Smoke Sensor: Detects slow-burning fires and reduces false alarms.
- Interlink Capability: Can be hardwired and interconnected with up to 12 compatible FireAngel smoke (SW1), heat (HW1), or carbon monoxide (CW1) alarms.
- Bokotra fitsapana/fanginana: Allows for easy testing of the alarm and temporary silencing of false alarms.
- Loud 85dB Alarm: Provides clear audible warning.
- LED famantarana: Visual alerts for alarm status.
- Sleep Easy Function: Temporarily silences low battery chirps for up to 8 hours.
- voamarina: Meets British Safety Standard EN 14604: 2005.
Sary 1: Eo anoloana view of the FireAngel SW1-R Mains Powered Optical Smoke Alarm.
Figure 2: FireAngel SW1-R Smoke Alarm highlighting its 9V backup battery, audible/visual alerts, and large test button.
2. Fampahalalana manan-danja momba ny fiarovana
Azafady vakio tsara ny toromarika rehetra alohan'ny hametrahana sy hampiasana azy. Tazomy ity boky torolalana ity ho an'ny fampiasana amin'ny ho avy.
- Fiarovana herinaratra: Installation must be carried out by a qualified electrician in accordance with local wiring regulations. Always disconnect the mains electricity supply before installation or maintenance.
- Fametrahana: Smoke alarms should be sited at least 300 mm (12 inches) from light fittings and walls.
- Avoidance Areas: This smoke alarm is tsy mety for installation in kitchens, bathrooms, garages, or areas with high humidity, dust, or extreme temperatures, as these conditions can lead to false alarms.
- Aza mandoko: Never paint the smoke alarm. Paint can block the smoke entry points and interfere with the sensor's operation.
- No Cleaners: Do not use cleaning agents or solvents on the device. Wipe with a dry cloth only.
- sakana: Ensure the alarm is not obstructed by furniture, curtains, or other objects that could prevent smoke from reaching the sensor.
- Fitsapana tsy tapaka: Test the alarm monthly to ensure proper function.
Figure 3: Illustration of recommended placement guidelines for the smoke alarm, showing distance from walls and light fittings, and unsuitable locations.
3. Ny votoatin'ny fonosana
Hamarino fa misy ny entana rehetra ary tsy simba rehefa manokatra ny fonosana:
- 1x FireAngel SW1-R Smoke Alarm Unit
- 1x Plate fototra
- 1x 9V Battery (for backup)
- 2x vy
- 2x Rawl Plugs
- 1x Boky Torolalana (ity antontan-taratasy ity)
4. Torolàlana momba ny fametrahana
Zava-dehibe: Installation should only be performed by a competent person or qualified electrician. Ensure the mains power supply is switched off at the consumer unit before commencing installation.
4.1. Dingana mialoha ny fametrahana:
- Safidio ny toerana: Choose a suitable location on the ceiling, adhering to the placement guidelines (refer to Section 2).
- Tapaka ny hery: Turn off the mains electricity supply to the circuit where the alarm will be installed.
- Install Backup Battery: Open the battery compartment on the alarm unit and insert the supplied 9V battery, observing polarity. Close the compartment securely.
4.2. Mounting the Alarm:
- Marka fandavahana: Hold the base plate against the ceiling at your chosen location and mark the two drilling points.
- Fandavahana lavaka (Drill holes): Drill holes at the marked points and insert the rawl plugs.
- Tendrombohitra Base Plate: Ampifandraiso amin'ny valindrihana ny takelaka fototra amin'ny fampiasana ireo visy nomena.
- Connect Wiring: Connect the mains wiring (Live, Neutral, Earth, and Interlink if applicable) to the terminal block provided. Ensure connections are secure and correct. The alarm unit connects to this terminal block.
- Attach Alarm Unit: Align the smoke alarm unit with the base plate and twist clockwise until it clicks securely into place.
Figure 4: Visual guide for easy installation, showing steps like installing the backup battery, mounting the bracket, attaching the alarm, and connecting to mains power.
4.3. Interlinking Multiple Alarms:
The SW1-R can be hardwired and interconnected with up to 12 compatible FireAngel mains-powered smoke (SW1), heat (HW1), or carbon monoxide (CW1) alarms. To interlink, connect the interlink wire between the designated terminals on each alarm's base plate. When one interlinked alarm detects a hazard, all connected alarms will sound simultaneously.
4.4. Fanamarinana aorian'ny fametrahana:
- Ampodio hery: Turn the mains electricity supply back on.
- Fanairana fitsapana: Press and hold the Test/Silence button for 5 seconds to confirm the alarm is functioning correctly. A loud, high-pitched sound indicates proper operation.
5. Torolàlana miasa
5.1. Fampandehanana mahazatra:
Under normal conditions, the alarm will periodically flash its LED indicator to show it is powered and monitoring for smoke. If smoke is detected, the alarm will sound a loud siren and the LED will flash rapidly.
5.2. Test/Silence Button:
- Fitsapana: Press and hold the large central Test/Silence button for approximately 5 seconds. The alarm will sound a loud siren, confirming its functionality. Release the button to stop the test. Perform this test monthly.
- Silencing False Alarms: In the event of a nuisance alarm (e.g., from cooking fumes), press and hold the Test/Silence button. This will temporarily silence the alarm for approximately 8 minutes. The alarm will automatically reset after this period. If the smoke source persists, the alarm will reactivate.
5.3. Sleep Easy Function:
If the 9V backup battery is low, the alarm will emit a regular "chirp" sound. To temporarily silence these low battery chirps for up to 8 hours, press the Test/Silence button. This allows for an uninterrupted night's sleep while still maintaining protection. Replace the battery as soon as possible after using this function.
6. Fikojakojana
Regular maintenance ensures the continued reliability and effectiveness of your smoke alarm.
- Fitsapana isam-bolana: Press the Test/Silence button monthly to ensure the alarm is functioning correctly.
- Quarterly Cleaning: Vacuum the alarm gently every 3 months using a soft brush attachment to remove dust and debris from the sensing chamber. This helps prevent false alarms and maintains sensor sensitivity.
- Fanoloana bateria: Replace the 9V backup battery immediately when the alarm emits low battery chirps that cannot be silenced or if the Sleep Easy function is used.
- Avoid Chemical: AZA use cleaners, solvents, or paint on the alarm.
- Cover During DIY: Cover the alarm when performing dusty DIY tasks nearby to prevent dust ingress, then uncover and vacuum thoroughly afterwards.
Figure 5: Visual summary of key maintenance recommendations for the smoke alarm, including monthly testing and quarterly vacuuming.
7. Famahana olana
If your smoke alarm is not operating as expected, refer to the following table for common issues and solutions:
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| Alarm chirps intermittently | Low 9V backup battery. | Replace the 9V battery immediately. Use the Sleep Easy function if needed for temporary silence. |
| Alarm sounds without visible smoke (false alarm) | Dust or debris in the sensing chamber; high humidity; cooking fumes; steam. | Press the Test/Silence button to temporarily silence. Vacuum the alarm thoroughly. Relocate the alarm if it's consistently affected by cooking fumes or steam. |
| Tsy maneno ny fanairana mandritra ny fitsapana | No mains power; flat 9V backup battery; faulty unit. | Check mains power supply. Replace 9V battery. If problem persists, contact customer support. |
| Interlinked alarms do not all sound | Faulty interlink wiring; incompatible alarms; too many alarms interlinked. | Check interlink wiring connections. Ensure all interlinked alarms are compatible FireAngel models. Do not exceed 12 interlinked alarms. |
8. Famaritana ara-teknika
| Laharana modely | SW1-R |
| Karazana sensor | Optical (Photoelectric) |
| Loharanon-kery | Mains Powered (230V AC) with 9V DC Battery Backup |
| Volume fanairana | 85dB amin'ny 3m |
| Interlink Capability | Up to 12 compatible FireAngel mains-powered alarms |
| Haben'ny vokatra (D x W x H) | 4.2D x 12.6W x 12.6H santimetatra |
| Lanja entana | 220g ny |
| Temperature miasa | Refer to product packaging for specific range |
| Sehatra fanetren-tena | Refer to product packaging for specific range |
| Fenitra | BS EN 14604: 2005 |
| UPC | 816317004422 |
Figure 6: The FireAngel SW1-R Smoke Alarm displaying its UKCA and CE certifications, indicating compliance with safety standards.
9. Warranty sy fanohanana ny mpanjifa
9.1. Fampahalalana momba ny fiantohana:
The FireAngel SW1-R Mains Smoke Alarm comes with a Warranty 5 taona manomboka amin'ny datin'ny fividianana. Ity fiantohana ity dia manarona ny lesoka amin'ny fitaovana sy ny asa amin'ny fampiasana mahazatra. Azafady, tehirizo ny porofon'ny fividiananao ho an'ny fitakiana fiantohana.
The warranty does not cover damage caused by misuse, accidental damage, unauthorized modifications, or failure to follow the instructions in this manual.
9.2. Fanohanana ny mpanjifa:
For technical assistance, warranty claims, or further information regarding your FireAngel SW1-R smoke alarm, please contact FireAngel customer support. Refer to the FireAngel official webtranokala na fonosana vokatra ho an'ny antsipiriany momba ny fifandraisana farany indrindra.
Webtranokala: www.fireangel.co.uk (Eksampny rohy, ny tena rohy dia mety miovaova arakaraka ny faritra)
