Sava lalana
This manual provides detailed instructions for the safe installation, operation, and maintenance of your BESTTEN 3-Way Decorator Wall Light Switch. Please read all instructions carefully before beginning installation and retain this manual for future reference. This switch is designed for use in both single-pole and 3-way circuits, allowing control of a light fixture from one or two locations.
Sary: Overview of BESTTEN 3-Way Decorator Wall Light Switches with included wallplates.
Information momba ny fiarovana
FAMPITANDREMANA: METY HISY FAHAVOZAN'NY FAHAVOZAN'NY HERINARATRA. NY FAMETRAHANA TSY ARA-DALÀNA DIA METY HITERAKA RARATRA LEHIBE NA FAHAFATESANA.
- Vonoy foana ny herinaratra eo amin'ny "circuit breaker" na ny "fuse box" alohan'ny hampidirana tariby.
- Verify power is off before proceeding with installation.
- Mametraka mifanaraka amin'ny kaody herinaratra nasionaly sy eo an-toerana.
- Raha tsy azonao antoka ny ampahany amin'ireo toromarika ireo dia miresaha amin'ny elektrisianina mahay.
- Do not use with loads exceeding the specified ratings (15A, 120V/277V).
- Ity fitaovana ity dia natao ho an'ny fampiasana anatiny ihany.
Fonosana fonosana
- BESTTEN 3-Way Decorator Wall Light Switch(es)
- Matching Decorator Wallplate(s)
- Fametrahana screws
fepetra arahana
| famaritana | sarobidy |
|---|---|
| Laharana modely | USP-LS03-10PK |
| Fomba fiasa | ON-OFF |
| Rating amin'izao fotoana izao | 15 Amps |
| Operating Voltage | 120 Volts / 277 Volts |
| Karazana fifandraisana | foana |
| Karazana mpampitohy | Sokiro |
| Terminus | Sokiro |
| Karazana Circuit | 3-way (also compatible with Single Pole) |
| Karazana Actuator | davarangany |
| Ny refin'ny vokatra | 2.91 x 4.69 x 1.28 santimetatra |
| KEVITRA | Impact-resistant polycarbonate thermoplastic and solid steel |
| Certifications | UL List |
Image: Physical dimensions of the switch and wallplate.
Fametrahana sy fametrahana
Before beginning, ensure the power is OFF at the circuit breaker. This switch can be used for both single-pole and 3-way applications.
Wiring Terminals Overview
Sary: Lafiny aoriana amin'ny antsipiriany view of the switch illustrating screw and push-in terminals.
- Black Screw: Connects to the Hot/Line wire or the Hot/Load wire.
- Brass Screws: Connect to the Traveler wires in a 3-way circuit.
- Green Screw: Connects to the Ground wire.
- Quick Push-in Terminals: Accept 14 AWG solid copper wire only. Terminal screws accept up to 12 AWG.
3-Way Circuit Wiring Diagram
A 3-way switch allows control of a single light fixture from two different locations. This setup requires two 3-way switches.
Image: Standard 3-way wiring configuration.
- Vonoy ny hery: Locate the circuit breaker controlling the switch and turn it OFF. Verify power is off using a voltage tester.
- Fantaro ny tariby: In a 3-way setup, you will typically find a Hot/Line wire, a Hot/Load wire, two Traveler wires, and a Ground wire. Label them if necessary.
- Connect Ground Wire: Connect the bare copper or green insulated ground wire from the wall box to the green ground screw on the switch.
- Ampifandraiso ireo tariby mpandeha: Connect the two traveler wires to the two brass screws on the switch. Ensure consistency between both 3-way switches (e.g., if one traveler is connected to the top brass screw on the first switch, connect it to the top brass screw on the second switch).
- Connect Hot/Line or Hot/Load Wire: Connect the Hot/Line wire (from the power source) to the black screw on the first 3-way switch. Connect the Hot/Load wire (going to the light fixture) to the black screw on the second 3-way switch.
- Fifamadihana azo antoka: Carefully fold the wires into the electrical box. Mount the switch to the box using the provided screws.
- Mametraka Wallplate: Attach the decorator wallplate over the switch.
- Ampodio hery: Avereno ON ny herinaratra amin'ny fiatoana.
Single Pole Circuit Wiring
For single-pole applications, the switch controls a light fixture from one location. Connect the Hot/Line wire to one black screw and the Hot/Load wire to the other black screw. Connect the ground wire to the green screw. The brass screws are not used in a single-pole configuration.
Torolàlana miasa
The BESTTEN 3-Way Decorator Wall Light Switch features a simple rocker paddle for operation.
- Press the top of the paddle to turn the connected light fixture ON.
- Press the bottom of the paddle to turn the connected light fixture OFF.
Image: Switch installed in a room, demonstrating its aesthetic integration.
fikarakarana
- Fanadiovana: To clean the switch and wallplate, wipe with a soft, damp lamba. Aza mampiasa mpanadio na solvents mikikisana. Ataovy azo antoka fa maty ny herinaratra alohan'ny hanadiovana azy.
- Fanaraha-maso: Periodically inspect the switch and wallplate for any signs of damage or wear. If damage is observed, turn off power and replace the switch.
Fanamboarana
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| Light does not turn ON/OFF | No power to the switch | Jereo ny "circuit breaker" ary ataovy azo antoka fa ON izy io. |
| Wiring malalaka na diso | Turn off power. Recheck all wire connections according to the wiring diagram. Ensure wires are securely fastened to terminals. | |
| Jiro tsy mety | Soloy ny takamoa. | |
| Switch feels loose in the wall box | Mounting screws are not tightened | Turn off power. Tighten the mounting screws that secure the switch to the electrical box. |
| Wallplate does not fit correctly | Switch not properly aligned or incorrect wallplate | Ensure the switch is centered and flush within the electrical box. Verify you are using the correct decorator-style wallplate. |
Warranty sy fanohanana
BESTTEN products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact information provided with your purchase or visit the official BESTTEN website.
For additional product information or to explore other BESTTEN electrical solutions, please visit the BESTTEN Store on Amazon.