SINOTIMER DDS6619

SINOTIMER DDS6619 Din Rail Single Phase Energy Meter User Manual

Model: DDS6619

1. Fampidirana

This manual provides detailed instructions for the installation, operation, and maintenance of the SINOTIMER DDS6619 Din Rail Single Phase Energy Meter. This device is designed for measuring active energy consumption in single-phase AC systems. Please read this manual thoroughly before installation and use to ensure proper function and safety.

SINOTIMER DDS6619 Din Rail Single Phase Energy Meter front view

Sary 1: Eo anoloana view of the SINOTIMER DDS6619 Din Rail Single Phase Energy Meter, showing the LCD display and terminal connections.

2. Information momba ny fiarovana

Please observe the following safety precautions to prevent injury and damage to the device:

3. Ny votoatin'ny fonosana

Rehefa manokatra ny fonosana, azafady hamarino fa misy ny entana rehetra ary tsy simba:

4. Toetran'ny vokatra

The DDS6619 energy meter offers a range of features for efficient power monitoring:

DDS6619 display modes showing temporary and total readings for kWh, voltage, current, power, frequency, and power factor

Image 2: Illustration of the DDS6619 display modes, demonstrating how temporary and total readings for various electrical parameters are shown.

5. Fametrahana sy fametrahana

5.1 refy

The meter is designed for standard DIN rail mounting. Refer to the dimensions below for proper planning:

DDS6619 dimensions showing width 36.3mm, height 78.5mm, and depth 65.8mm

Image 3: Dimensional drawing of the DDS6619 meter, indicating its width (36.3mm), height (78.5mm), and depth (65.8mm) for installation planning.

5.2 Fametrahana

  1. Ensure the main power supply is turned off at the circuit breaker before proceeding.
  2. Mount the DDS6619 meter onto a standard 35mm DIN rail in your electrical panel.
  3. Ensure the meter is securely fastened to prevent movement.

5.3 Wiring Diagram

Follow the wiring diagram carefully. Incorrect wiring can cause damage to the meter or electrical system.

DDS6619 wiring diagram showing L and N connections for input and output

Image 4: Wiring diagram for the DDS6619 meter, illustrating the correct connections for live (L) and neutral (N) input and output terminals.

  1. Connect the incoming Live (L) wire to the terminal marked 'L' on the input side.
  2. Connect the incoming Neutral (N) wire to the terminal marked 'N' on the input side.
  3. Connect the outgoing Live (L) wire to the terminal marked 'L' on the output side.
  4. Connect the outgoing Neutral (N) wire to the terminal marked 'N' on the output side.
  5. Hamarino tsara ny hamafin'ny fifandraisana rehetra sy ny fahamarinany alohan'ny hamerenana ny herinaratra.

6. Torolàlana miasa

6.1 Herinaratra

After successful installation and wiring, restore power to the circuit. The meter's LCD display will illuminate, showing the current readings.

6.2 Fomba fampisehoana

The meter features a dual-row display. The top row cycles through various temporary electrical parameters, while the bottom row consistently shows the total power consumption (kWh).

6.3 Reset Function for Temporary kWh

The temporary kWh reading can be reset to zero for monitoring consumption over specific periods.

DDS6619 reset function explanation showing temporary and total power consumption and reset button

Image 5: Diagram illustrating the reset function. The top display shows temporary power consumption (resettable), the bottom shows total power consumption (not resettable), and indicates to hold the reset button for 6 seconds.

  1. Locate the reset button on the front panel of the meter.
  2. Press and hold the reset button for approximately 6 seconds.
  3. The temporary kWh value on the top display will reset to zero. The total power consumption on the bottom display will remain unchanged.

7. Famaritana

fikiranasarobidy
MODELYDDS6619
Naoty Voltage120VAC
Naoty ankehitriny5(80)A
hatetika60Hz
Kilasy marina1.0
misehoLCD miaraka amin'ny Blue Backlight
fitomboan'ny35mm DIN Rail
KEVITRAFlame Retardant ABS
Ny haben'ny fonosana2.72 x 1.65 x 0.63 santimetatra
lanja0.48 oz

8. Fikojakojana

The DDS6619 energy meter requires minimal maintenance. Follow these guidelines to ensure its longevity:

9. Famahana olana

If you encounter issues with your DDS6619 meter, refer to the following common problems and solutions:

OLANAAntony mety hitrangavahaolana
No display/Meter not powering onNo power supply; Incorrect wiring; Faulty meterCheck power supply to the circuit. Verify wiring connections according to the diagram. If problem persists, contact support.
Vakiteny tsy marinaIncorrect wiring; Overload; External interferenceRe-check wiring. Ensure load does not exceed meter's maximum current rating. Isolate from strong electromagnetic fields.
Temporary kWh not resettingReset button not held long enoughPress and hold the reset button for a full 6 seconds.
Total kWh reading is zero or incorrectIncorrect wiring; Meter malfunctionVerify wiring. Note that total kWh cannot be reset. If consistently incorrect, contact support.

10. Warranty sy fanohanana

SINOTIMER products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official SINOTIMER website.

Afaka mahita fampahalalana bebe kokoa sy antsipirian'ny fifandraisana ianao ao amin'ny SINOTIMER Store on Amazon.

Documents mifandraika - DDS6619

Preview SINOTIMER DDS6619 Series Guide Rail Metering Switch Boky Torolàlana
Torolàlana torolalana ho an'ny SINOTIMER DDS6619 andian-tsarimihetsika mpitari-dalana amin'ny karazana fandrefesana. Ny antsipiriany momba ny fepetra ara-teknika, ny tariby, ny fanaraha-maso ny fampiharana amin'ny alàlan'ny Smart Life/Tuya, ny toromarika fampiasa, ary ny fitandremana fiarovana amin'ny fanaraha-maso angovo marani-tsaina.
Preview SINOTIMER SVP719 Torolàlana ho an'ny mpampiasa: Voltage Mpiaro, Meteran'ny angovo, ary fanaraha-maso fanjifana herinaratra
Torolàlana ho an'ny mpampiasa feno ho an'ny SINOTIMER SVP719, amin'ny antsipiriany ny endri-javatra ho toy ny voly ambony / ambanytage mpiaro, mpiaro ny firongatry ny fihoaram-pefy, fampitana fetra tafahoatra, ary metatra angovo Watt/kWh hanaraha-maso ny fanjifana herinaratra.
Preview SINOTIMER TM-610 Digital Time Switch ho an'ny DIN Rail - Torolàlana ho an'ny mpampiasa sy ny famaritana
Famaritana amin'ny antsipiriany, diagrama wiring, ary torolalana momba ny fiasan'ny SINOTIMER TM-610 digital time switch, natao ho an'ny DIN rail mounting.
Preview SINOTIMER TM928 Series HD LCD Digital Timer Switch - Torolàlana ho an'ny mpampiasa sy ny famaritana
Torolàlana feno amin'ny fameram-potoana nomerika andiany SINOTIMER TM928, mandrakotra ny endri-javatra, ny famaritana, ny fametrahana ary ny tariby ho an'ny modely toa ny TM919, TM920, TM928, TM928S, TM928R, ary TM929.
Preview SINOTIMER TM929: Guía del Temporizador Analógico Diario de 24 Horas
Jereo ny el temporizador analógico diario SINOTIMER TM929 amin'ny 24 ora. Este manual proporciona información detallada sobre sus características, especificaciones técnicas y diagramas de cableado for un fácil instalación y operación.
Preview SINOTIMER TM-630A/TM-630S Digital Timer: endri-javatra sy ny famaritana
Famaritana ara-teknika amin'ny antsipiriany sy endri-javatra ho an'ny SINOTIMER TM-630A sy TM-630S digital programmable timers, ao anatin'izany ny famatsiana herinaratra, ny fotoana, ny refy ary ny tariby.