RAB Lighting SR8 8 ft. LED Strip Fixture Instruction Manual

1. Vokatra mihoatraview

The RAB SR8 is an 8-foot LED strip fixture designed for commercial lighting applications. This fixture features field-adjustable power settings (40W, 50W, 60W) and color temperatures (3500K, 4000K, 5000K), providing flexibility to suit various lighting needs. It is 0-10V dimmable and compatible with 120-277V electrical systems, offering efficient and versatile illumination.

Sary 1.1: TAPITRAview of the RAB SR8 8 ft. LED Strip Fixture. This image displays the full length of the white LED strip fixture, highlighting its sleek and linear design suitable for surface mounting in commercial environments.

2. Information momba ny fiarovana

• FAMPITANDREMANA: Mety hisian'ny fahatairana elektrika. Esory ny herinaratra eo amin'ny fuse na ny circuit breaker alohan'ny hametrahana na hanamboarana azy.
• Ny fametrahana dia tsy maintsy ataon'ny elektrisianina mahafeno fepetra mifanaraka amin'ny kaody elektrika nasionaly sy eo an-toerana.
• Ataovy azo antoka ny famatsiana voltage is correct for the fixture (120-277V).
• Aza mikasika fitaovana efa nampiasaina tamin'ny herinaratra amin'ny tanana lena.
• Aza apetraka eo akaikin'ny fitaovana mora mirehitra.
• Ity fitaovana ity dia natao hampiasaina an-trano ihany.

3. Fametrahana sy fametrahana

3.1. Alohan'ny fametrahana

• Esory ny fonosan'ny fitaovana ary jereo raha misy fahasimbana.
• Ensure all necessary components are present (LED Fixture).
• Vonoy ny herinaratra eo amin'ny "circuit breaker" alohan'ny hanombohana ny fametrahana azy.

3.2. Fametrahana ny Fixture

The SR8 fixture is designed for surface mounting. Refer to the dimensional drawing for precise measurements and mounting hole locations.

Sary 3.1: Dimensional drawing of the RAB SR8 fixture. This diagram illustrates the length (94.49 inches), width (2.36 inches), and height (2.79 inches) of the fixture, along with potential mounting points.

1. Mark the desired mounting locations on the ceiling or wall, ensuring they align with the fixture's mounting points.
2. Drill appropriate holes for mounting screws (not included).
3. Secure the fixture to the mounting surface using suitable hardware.

3.3. Wiring elektrika

Connect the fixture to the electrical supply according to the wiring diagram below. Ensure all connections are secure and comply with local electrical codes.

Sary 3.2: Wiring diagram for the RAB SR8 LED Strip Fixture. This diagram shows the connections for Line (Black), Common (White), (+) DIMV (Purple), (-) DIMV (Pink), Vaux 12V (Red), and Ground (Ground) to the light fixture.

• Connect the black wire from the fixture to the LINE (hot) wire from the supply.
• Connect the white wire from the fixture to the COMMON (neutral) wire from the supply.
• Connect the green or bare copper wire from the fixture to the GROUND wire from the supply.
• For 0-10V dimming, connect the purple wire to (+) DIMV and the pink wire to (-) DIMV from the dimming control. If dimming is not used, cap these wires individually.
• Ensure all wire nuts or connectors are tightened securely.

4. Torolàlana miasa

The RAB SR8 fixture allows for field adjustment of both power output and color temperature to customize lighting performance.

Sary 4.1: Akaiky view of the power (W) and color temperature (CCT) adjustment switches on the RAB SR8 fixture. This image shows the physical switches used to select desired wattage and Kelvin temperature settings.

4.1. Power Adjustment (Wattage)

The fixture includes a switch to select the desired wattage output. This allows for optimization of brightness and energy consumption.

• Locate the "Power (W)" switch on the fixture.
• Mifidiana iray amin'ireto toe-javatra manaraka ireto: 40W, 50W, na 60W.
• Ensure power is disconnected before adjusting this switch.

4.2. Color Temperature Adjustment (CCT)

The fixture also features a switch to select the desired color temperature, allowing you to choose between different light appearances.

• Locate the "Color Temperature (CCT)" switch on the fixture.
• Mifidiana iray amin'ireto toe-javatra manaraka ireto: 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight).
• Ensure power is disconnected before adjusting this switch.

4.3. Dimmable Functionality

The SR8 fixture supports 0-10V dimming. When connected to a compatible 0-10V dimmer, the light intensity can be adjusted from 100% down to 10% (or lower, depending on dimmer specifications).

• Ensure the fixture is correctly wired for 0-10V dimming as per Section 3.3.
• Use a compatible 0-10V dimmer switch (sold separately) to control the light output.

5. Fikojakojana

The RAB SR8 LED Strip Fixture requires minimal maintenance. Regular cleaning can help maintain optimal performance and appearance.

• Fanadiovana: Tapaho ny herinaratra alohan'ny hanadiovana. Ampiasao malefaka, maina, na kely damp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners or solvents.
• LED: The integrated LED light source is designed for long life and does not require replacement.

6. Famahana olana

If the fixture is not operating as expected, refer to the following common issues and solutions:

If troubleshooting steps do not resolve the issue, contact RAB Lighting customer support.

7. Famaritana

8. Fampahalalana momba ny fiantohana

The RAB SR8 LED Strip Fixture comes with a Limited Warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official RAB Lighting webtranokala na mifandray mivantana amin'ny serivisy mpanjifany. Tehirizo ny porofon'ny fividiananao ho an'ny fitakiana fiantohana.

9. Fanohanana ny mpanjifa

For technical assistance, replacement parts, or any questions not covered in this manual, please contact RAB Lighting customer support:

• Webtranokala: www.rablighting.com
• Jereo ny website for current contact information, including phone numbers and email support.