Sava lalana
This manual provides essential information for the safe and effective use of your WAVE Hot Tub Replacement Heater Unit. This external heating unit is specifically designed for older WAVE spas. Please note that this unit is compatible ONLY with WAVE hot tubs that utilize external heaters and will NOT fit any newer models with integrated heating systems.
Before installation and operation, please read this manual thoroughly and retain it for future reference.
Fampahalalana manan-danja momba ny fiarovana
WARNING: Failure to follow these instructions can result in electric shock, fire, or serious injury.
- Esory foana ny herinaratra alohan'ny hanaovana fikojakojana na fametrahana.
- Ensure the heater unit is installed by a qualified professional if you are unsure of the process.
- Aza ampiasaina ny fanafanana raha simba ny tariby na ny plug-n'ny herinaratra.
- Keep all electrical connections dry and away from water.
- This unit is designed for outdoor use with compatible hot tubs. Do not use indoors.
- Ensure proper grounding of the electrical supply.
- Do not attempt to modify or repair the heater unit yourself. Contact qualified service personnel.
- Keep children and pets away from the heater unit during operation.
Fonosana fonosana
Please check the package contents to ensure all parts are present and undamaged:
- WAVE Hot Tub Replacement Heater Unit (External)
- Tady herinaratra (mifamatotra)
- Connection Hoses/Fittings (if included, typically integrated with the unit)
- User Manual (ity antontan-taratasy ity)
If any parts are missing or damaged, please contact WAVE customer support immediately.
Fametrahana sy fametrahana
This section outlines the steps for installing your WAVE Hot Tub Replacement Heater Unit. Ensure your hot tub is drained and disconnected from power before beginning installation.
1. Prepare the Hot Tub
- Ensure the hot tub is completely drained of water.
- Disconnect the hot tub from its main power supply.
- Locate the existing external heater connections on your hot tub.
2. Connect the Heater Unit
The replacement heater unit connects to the hot tub via specific inlet and outlet ports. Refer to the diagram below for visual guidance.

Figure 1: Connection Diagram. This image illustrates how the external heater unit connects to the hot tub, highlighting the power unit and the internal heat chambers within the hot tub structure.
- Carefully align the inlet and outlet ports of the new heater unit with the corresponding connections on your hot tub.
- Securely attach the connections, ensuring a watertight seal. Use appropriate tools if necessary, but do not overtighten.
- Position the heater unit on a stable, level surface near the hot tub, ensuring adequate ventilation.
3. Fampifandraisana herinaratra
- Once the heater unit is securely connected to the hot tub, you may begin refilling the hot tub with water.
- Ensure the hot tub is filled to the recommended level before connecting power.
- Plug the heater unit's power cord into a suitable, grounded electrical outlet. Ensure the outlet meets the power requirements specified in the 'Specifications' section.

Figure 2: WAVE External Heater Unit. This image provides a side view of the replacement heater unit, showcasing its design and the location of its connection ports.
Torolàlana miasa
After successful installation and filling the hot tub, you can begin operating the heater unit.
- Herim-batana: Once plugged in, the unit should power on. The control panel (if present on the unit or integrated with the hot tub's main control) will illuminate.
- Mametraha hafanana: Use the temperature control buttons (usually up/down arrows) to set your desired water temperature. The maximum temperature for most hot tubs is 104°F (40°C).
- Cycle fanafanana: The heater will automatically begin heating the water to the set temperature. The time required to reach the desired temperature will vary depending on the initial water temperature, ambient temperature, and hot tub volume.
- Sivana sivana: The heater unit often works in conjunction with the hot tub's filtration system. Ensure your hot tub's filter pump is operating correctly for efficient heating and water circulation.
- Mamono hery: To turn off the heater, either use the power button on the control panel or disconnect the unit from the main power supply.
For detailed operation of your specific hot tub's control panel, refer to your hot tub's original user manual.
fikarakarana
Regular maintenance ensures the longevity and efficient operation of your heater unit.
- Ataovy madio ny fifandraisana: Periodically inspect the hose connections for any debris or mineral buildup. Clean as necessary.
- Jereo raha misy leak: Regularly check all connections for any signs of water leaks. Address any leaks immediately to prevent damage.
- Madio ivelany: Wipe down the exterior of the heater unit with a damp lamba hanesorana ny vovoka sy ny loto. Aza mampiasa akora simika mahery vaika na mpanadio mikikisana.
- ririnina: If you are winterizing your hot tub, ensure the heater unit is completely drained of water to prevent freezing and damage. Store the unit in a dry, protected area if removed from the hot tub.
- Fikarakarana sivana: While not directly part of the heater unit, a clean hot tub filter is crucial for efficient water flow through the heater. Follow your hot tub's instructions for filter cleaning and replacement.
Fanamboarana
This section provides solutions to common issues you might encounter with your heater unit.
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| Tsy mirehitra ny fanafanana. | No power supply; tripped circuit breaker; faulty power cord. | Check power outlet and circuit breaker. Ensure power cord is securely plugged in. |
| Rano tsy mafana. | Low water flow; dirty filter; air lock; heater element failure. | Ensure hot tub is filled to correct level. Clean or replace filter. Bleed air from system. If problem persists, contact support. |
| Kaody diso naseho. | Specific system fault (e.g., low flow, overheating). | Refer to your hot tub's main manual for specific error code meanings and solutions. Disconnect power, wait 5 minutes, and reconnect. |
| Ny rano mitete avy amin'ny fifandraisana. | Fifandraisana mivaha; peratra/tombo-kase O simba. | Henjano ny fifandraisana. Jereo ary soloo ny peratra-O/tombo-kase raha simba. |
If you are unable to resolve an issue using the troubleshooting guide, please contact WAVE customer support.
fepetra arahana
Technical specifications for the WAVE Hot Tub Replacement Heater Unit:
- Haben'ny vokatra: 30 x 10 x 30 santimetatra
- Lanja entana: 30 kg
- Mpanamboatra: NIRONGATRA
- Laharana modely: External Heater Replacement
- ASIN: B0DHD8FHT6
- mifanentana: Older WAVE hot tubs with external heater units ONLY. Not compatible with new integrated heater hot tubs.
- Hery takiana: Please refer to the label on the unit for exact electrical requirements.
Warranty sy fanohanana
WAVE products are manufactured to high-quality standards. For information regarding the warranty period and terms for your specific heater unit, please refer to the warranty card included with your purchase or visit the official WAVE website.
For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact WAVE customer service:
- Webtranokala: Visit the WAVE Store on Amazon (ho an'ny fampahalalana ankapobeny momba ny marika)
- Antsipiriany ifandraisana: Please refer to the official WAVE website or product packaging for direct customer support contact details (phone, email).
Lahatsary vokatra ofisialy
No official product videos from the seller are available for this specific heater unit at this time.





