Antec CX700 ATX Mid Tower Gaming Case User Manual

1. Fampidirana

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Antec CX700 ATX Mid Tower Gaming Case. Designed for PC enthusiasts, this case features a sleek, modern design with a tempered glass side panel and pre-installed ARGB fans to enhance visual appeal and ensure optimal airflow. Please read this manual thoroughly before beginning assembly to ensure proper setup and safe operation.

2. Famaritana

3. Ny votoatin'ny fonosana

• Antec CX700 ATX Mid Tower Gaming Case
• Pre-installed ARGB Fans (3 fans, typically front-mounted as per product title)
• Accessory Box (Screws, cable ties, user manual)
• Tempered Glass Side Panel

4. Torolàlana fananganana

4.1 Famoahana sy fisafoana

Carefully remove the case from its packaging. Inspect for any signs of damage during transit. The tempered glass panel is fragile; handle with care.

Sary 1: Eo anoloana sy ilany view of the Antec CX700 case, showcasing the tempered glass panel and pre-installed fans.

4.2 Removing Side Panels

To access the interior for component installation, remove the tempered glass side panel and the solid rear side panel.

1. Locate the thumbscrews on the rear of the case securing the tempered glass panel.
2. Carefully unscrew these thumbscrews.
3. Gently pull the tempered glass panel away from the chassis. Lay it flat on a soft, clean surface to prevent scratches or damage.
4. Repeat the process for the solid rear side panel if necessary for cable management access.

Sary 2: aoriana view of the Antec CX700 case, showing the rear fan and expansion slots. The side panel is removed for internal access.

4.3 Fametrahana Motherboard

Install your ATX motherboard into the designated area. Ensure all standoffs are correctly aligned and secured.

4.4 Fametrahana singa

Install your CPU, RAM, GPU (up to 410mm length), storage drives (3.5" HDD, 2.5" SSD), and power supply unit (PSU, up to 225mm length) according to their respective manuals and the case's layout.

Sary 3: Ambony view of the Antec CX700 case, highlighting the pre-installed fans and internal layout for component placement.

4.5 Fitantanana tariby

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables effectively. This improves airflow and aesthetics.

4.6 Fifandraisana I/O eo anoloana

Connect the front panel I/O cables (USB 3.0, USB Type-C, HD Audio, Power, Reset, LED) to the corresponding headers on your motherboard.

• Bokotra hery: Initiates system power.
• bokotra Reset: Mamerina ny rafitra.
• Port USB 3.0 (x2): Ho an'ny famindrana angona haingam-pandeha.
• USB Type-C Port (x1): For modern device connectivity.
• Jack finday: Output audio.
• Jack mikrô: Fampidirana feo.

5. Torolàlana miasa

Once all components are installed and connected, replace the side panels. Connect your peripherals, monitor, and power cable. Press the power button on the top panel to start your system. The pre-installed ARGB fans will illuminate, providing customizable lighting effects.

6. Fikojakojana

Ny fikojakojana tsy tapaka dia miantoka ny fahombiazana tsara indrindra sy ny faharetan'ny boaty sy ny singa ao amin'ny PC-nao.

• Sivana vovoka: The case includes magnetic dust filters (e.g., on the top panel) that can be easily removed and cleaned with water or a soft brush. Clean these regularly to maintain airflow and prevent dust buildup inside the case.
• Fanadiovana anatiny: Periodically open the side panels and use compressed air to remove dust from internal components and fans. Ensure the system is powered off and unplugged before cleaning.
• Varavarankely (Tempered Glass): Clean the tempered glass panel with a microfiber cloth and a non-abrasive glass cleaner. Avoid harsh chemicals.

7. Famahana olana

Raha sendra olana ianao dia jereo ireto dingana famahana olana mahazatra ireto:

• Tsy mandeha ny rafitra:
  • Ensure the power supply is properly connected to the wall outlet and the PSU switch is in the 'ON' position.
  • Verify all power cables (24-pin ATX, 8-pin CPU, PCIe for GPU) are securely connected to the motherboard and components.
  • Check that the front panel power button cable is correctly connected to the motherboard's front panel header.
• Tsy mihodina ny mpankafy / Tsy mirehitra ny ARGB:
  • Confirm that the fan power cables and ARGB cables are correctly connected to the motherboard or a dedicated ARGB controller.
  • Refer to your motherboard manual for proper ARGB header connections and software control.
• Tsy misy vokatra aseho:
  • Ensure your monitor cable is connected to the graphics card (GPU) output, not the motherboard's integrated graphics ports (unless using integrated graphics).
  • Avereno apetraka ao amin'ny slot PCIe-ny ny karatra grafika.

8. Warranty sy fanohanana

The Antec CX700 ATX Mid Tower Gaming Case comes with a standard manufacturer's warranty. For specific warranty terms, duration, and to register your product, please visit the official Antec webtranonkala na mifandraisa amin'ny serivisy ho an'ny mpanjifany. Tazomy ny porofon'ny fividiananao ho an'ny fangatahana fiantohana.

For further technical assistance or support, please refer to the Antec support resources available online.