Sava lalana
This manual provides comprehensive instructions for the installation, operation, and maintenance of your OONO DIN Rail Mount 16 LEDs Indicator Light Module. This module is designed for industrial and electrical applications, offering clear visual indication with 16 independent LED channels. Please read this manual thoroughly before use to ensure proper and safe operation.
Information momba ny fiarovana
- Always disconnect power before installing, wiring, or performing maintenance on the module.
- Ataovy azo antoka fa mifanaraka amin'ny code elektrika eo an-toerana sy nasionaly ny tariby rehetra.
- This module operates with DC voltage. Verify correct polarity before applying power.
- Aza mihoatra ny volume miasa voafaritratag5VDC hatramin'ny 50VDC.
- Avoid exposing the module to excessive moisture, dust, or extreme temperatures.
- Ny mpiasa mahay ihany no tokony hanao ny fametrahana sy ny wiring.
Vita ny vokatraview
The OONO D-1003T Series is a 16-channel LED indicator light module featuring 5mm blue LEDs. It supports both Common Positive and Common Negative control modes, making it versatile for various circuit designs. The module is equipped with 5.0mm pitch screw terminal blocks for secure wire connections and comes with a high-quality fireproof nylon DIN rail mount carrier.
Lafin-javatra fototra:
- 16 independent LED indicator channels.
- Volan'ny asa malalakatage range: 5VDC to 50VDC.
- Supports Common Positive and Common Negative control.
- Robust 5.0mm pitch screw terminal blocks.
- DIN rail mountable (35mm, 32mm, 15mm compatible) with detachable carrier for panel mounting.
- FR-4 fiber glass PCB for durability.
singa:
- 16 x 5mm Blue LEDs
- Input Terminal Blocks (Channels 1-8, 9-16, COM)
- DIN Rail Mount Carrier
- FR-4 PCB
Sary 1: Ambony midina view of the 16-LED indicator module, showing the LED array and terminal blocks.
Figure 2: Angled perspective of the module, highlighting its compact design and integrated DIN rail mounting mechanism.
fepetra arahana
| fikirana | sarobidy |
|---|---|
| Laharana modely | D-1003T Series |
| Isan'ny fantsona | 16 |
| Loko LED | Manga |
| LED Diameter | 5mm |
| Operating Voltage | 5VDC ~ 50VDC |
| Drive Current (per LED) | 0.3mA (at 5VDC), 1.0mA (at 12VDC), 2.2mA (at 24VDC), 4.6mA (at 48VDC) |
| Terminal Block Pitch | 5.0mm / 0.197" |
| Wire Range | 26 to 12AWG / 2.5mm² |
| Halavan'ny Strip | 7mm / 0.28" |
| Karazana fametrahana | DIN Rail Mount (35mm/32mm/15mm), Panel Mount (carrier detachable) |
| KEVITRA | Fireproof Nylon (carrier), FR-4 (PCB) |
| Ny refin'ny vokatra | 3.42 x 2.44 x 1.58 santimetatra (87 x 62 x 40.2 mm) |
| Lanja entana | 4.3 ounces (122 grama) |
Figure 3: Detailed dimensional drawing of the module, showing key measurements in millimeters.
Fametrahana sy fametrahana
Inona no ao anaty boaty:
- 1 x DIN rail mount indicator light module
Mounting the Module:
The module is designed for easy installation on standard DIN rails (35mm, 32mm, or 15mm). The carrier can also be detached for panel mounting applications.
- DIN Rail Mounting: Align the module's clips with the DIN rail. Press down firmly until the module snaps securely onto the rail. Ensure it is seated properly and does not wobble.
- Fametrahana tontonana: The DIN rail carrier can be disassembled from the main PCB. Once detached, the PCB can be mounted directly to a panel using appropriate standoffs or screws (not included).
Figure 4: The indicator module securely mounted on a standard DIN rail, ready for wiring.
Torolàlana tariby:
The module features 5.0mm pitch screw terminal blocks for connecting input signals. Each LED channel (1-16) has a dedicated input terminal, and there is a common (COM) terminal.
- Manomàna tariby: Strip approximately 7mm (0.28 inches) of insulation from the ends of your wires (26 to 12AWG / 2.5mm²).
- Connect Inputs: Loosen the screws on the desired terminal blocks. Insert the stripped wire ends fully into the terminal openings. Tighten the screws to secure the wires. Gently tug on the wires to ensure a firm connection.
- Common Connection: Connect the common return path of your control circuit to the "COM" terminal.
Sary 5: akaiky view of the screw terminal blocks, indicating channel numbers and the common terminal.
Fomba fiasa
The OONO D-1003T Series supports both Common Positive and Common Negative control configurations. This flexibility allows integration into various existing control systems.
Common Positive Control:
In this mode, the "COM" terminal is connected to the positive supply voltage. Each individual channel terminal (1-16) is then connected to the negative side of the control signal. When a channel's input is pulled low (connected to ground or negative supply), the corresponding LED will illuminate.
- Connect the positive supply (e.g., +5VDC to +50VDC) to the fr Terminus.
- Connect the negative side of your control signal for each channel (1-16) to its respective input terminal.
- LED illuminates when the input terminal is connected to the negative potential.
Common Negative Control:
In this mode, the "COM" terminal is connected to the negative supply voltage (ground). Each individual channel terminal (1-16) is then connected to the positive side of the control signal. When a channel's input is pulled high (connected to positive supply), the corresponding LED will illuminate.
- Connect the negative supply (e.g., Ground) to the fr Terminus.
- Connect the positive side of your control signal for each channel (1-16) to its respective input terminal.
- LED illuminates when the input terminal is connected to the positive potential.
Figure 6: Internal circuit diagram illustrating the connection of LEDs and resistors to the input and common terminals.
fikarakarana
The OONO DIN Rail Mount 16 LEDs Indicator Light Module is designed for long-term, maintenance-free operation. However, periodic checks can help ensure optimal performance.
- Fanadiovana: If necessary, gently wipe the module with a dry, soft cloth to remove dust. Do not use liquid cleaners or solvents.
- Fanamarinana fifandraisana: Periodically inspect terminal block screw connections to ensure they remain tight and secure. Loose connections can lead to intermittent operation or damage.
- Fepetra ara-tontolo iainana: Ensure the operating environment remains within the specified temperature and humidity ranges to prevent premature component degradation.
Fanamboarana
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| No LEDs illuminate. | No power supply to the common terminal, incorrect common connection, or no input signal. | Hamarino ny famatsiana herinaratra voltage is within 5-50VDC. Check common terminal wiring (COM). Ensure input signals are correctly applied to individual channels. |
| Specific LED(s) do not illuminate. | Faulty input signal to that channel, incorrect wiring for that channel, or damaged LED. | Check the input signal for the specific channel. Verify wiring for that channel is secure and correct. If all else fails, the LED may be damaged and require module replacement. |
| LEDs are dim or flicker. | Famatsiana tsy ampy voltage, loose connections, or excessive current draw from other components on the same supply. | Miantoka famatsiana voltage is stable and within range. Check all terminal connections for tightness. Isolate the module to confirm power supply stability. |
| Module does not mount securely on DIN rail. | Incorrect DIN rail size or improper mounting technique. | Ensure you are using a 35mm, 32mm, or 15mm DIN rail. Press firmly until the clips engage. |
Warranty sy fanohanana
For warranty information and technical support, please refer to the official OONO website or contact your authorized distributor. Keep your purchase receipt as proof of purchase for any warranty claims.
Mpanamboatra: CZH-LABS
marika: OONO
Raha mila fanampiana fanampiny dia azonao atao ny mitsidika ny OONO Store on Amazon.
