Vita ny vokatraview
The RYOBI 25cc Gas Jet Fan Blower is a powerful handheld tool designed for efficient clearing of leaves, grass, and debris. It features a 2-cycle engine, jet fan design, variable speed trigger, and cruise control for optimal performance and user comfort.
- maotera: 25cc Gas, 2-Cycle
- Hafaingan'ny rivotra: Hatramin'ny 160 MPH
- Haben'ny rivotra: 520 CFM
- Toetoetra: Jet Fan Design, Variable Speed Trigger, 3-Position Cruise Control, Anti-Vibe Handle
- Antony endrika: Handheld
Setup sy Assembly
Famoahana sy fisafoana voalohany
Carefully remove all components from the packaging. Inspect for any damage. Ensure all parts listed in the packing list are present.
Torolàlana momba ny fivoriambe
- Attach Blower Tubes: The blower tube typically comes in multiple sections. Align the sections and push them together until they securely click into place. Some models may use clips or screws for additional security.
- Install Control Handle (if applicable): If your model includes a separate control handle for the blower tube, attach it to the designated slot on the tube. Ensure it is firmly secured and allows for comfortable operation.
- Connect Flexible Hose (if applicable): For models with a flexible hose connecting the engine unit to the blower tube, attach the hose securely to both ends using the provided clamps.
Fanomanana solika
This RYOBI blower uses a 2-cycle engine and requires a specific gasoline-to-oil mixture. Refer to the fuel tank cap or the engine label for the exact ratio. A common ratio for 25cc 2-cycle engines is 25:1 or 40:1. Always use fresh, unleaded gasoline with an octane rating of 89 or higher and a high-quality 2-cycle engine oil.
- Mix the gasoline and 2-cycle oil in a separate, approved fuel container.
- Shake the container thoroughly to ensure proper mixing.
- Aza afangaro mivantana amin'ny tobin-tsolika an'ny mpitsoka.
Fueling the Blower
- Apetraho eo amin'ny toerana ambony ny blower.
- Clean the area around the fuel cap to prevent dirt from entering the tank.
- Esory tsara ny satroka solika.
- Pour the prepared fuel mixture into the fuel tank using a funnel to avoid spills.
- Do not overfill. Leave space for fuel expansion.
- Avereno tsara ny sarom-tsolika.
Torolàlana miasa
Starting the Engine (Cold Start)
- Prime ny motera: Press the primer bulb 10 times until fuel is visible in the return line.
- Apetraka ny "choke": Atsofohy amin'ny toerana CLOSED ny lever kenda.
- Set Speed Control: Push the speed control lever all the way forward.
- Pull Starter Rope: Place the blower on a flat, stable surface. Hold the blower firmly with one hand and pull the starter rope until the engine attempts to start (you may hear a puff noise). Do not pull more than 3 times.
- Ahitsio ny "choke": Move the choke lever to the MIDDLE position.
- Restart Engine: Pull the starter rope again until the engine fully starts and runs.
- Hetsika famanam-batana: Let the engine run for approximately 10-30 seconds.
- Fisokafana misokatra: While fully squeezing and holding the trigger, move the choke lever to the OPEN or OFF position.
- Final Warm-up: Allow the engine to run for an additional 1 minute to fully warm up before use.
Mampiasa ny Blower
- Variable Speed Trigger: Control the air speed by adjusting the pressure on the trigger.
- Fanaraha-maso ny sambo: Engage the 3-position cruise control for continuous operation at a desired speed without holding the trigger.
- Anti-Vibe Handle: The anti-vibration handle with overmolded grips is designed for optimized user comfort during extended use.
fikarakarana
Fanamarinana tsy tapaka
- Sivana rivotra: Regularly inspect and clean the air filter to ensure proper engine performance and prevent overheating. Replace if damaged.
- Fitsipi-tsilaka: Check the spark plug periodically for wear and carbon buildup. Clean or replace as needed to ensure easy starting and efficient combustion.
- Lakandranon-tsolika: Inspect fuel lines for cracks or leaks. Replace any damaged lines immediately.
- Fanadiovana ankapobeny: Keep the blower's air intake and exterior free of debris to maintain optimal airflow and prevent engine strain.
fitahirizana
- For long-term storage, drain all fuel from the tank and run the engine until it stops to clear the carburetor.
- Diovy tsara ilay blower alohan'ny hitahirizana azy.
- Tehirizo ao amin'ny toerana maina sy mahazo rivotra tsara, lavitry ny tara-masoandro mivantana sy ny mari-pana tafahoatra.
Fanamboarana
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| Tsy manomboka ny motera | Tsy misy solika na fangaro solika diso | Fill tank with correct 2-cycle fuel mixture. |
| Spark plug fouled or wet | Diovy na soloy ny fanilo. | |
| Kenda tsy voapetraka tsara | Follow cold start procedure. | |
| Very fahefana | Sivana rivotra tsentsina | Manadio na manolo ny sivana rivotra. |
| Solika tonta na lany | Drain old fuel and refill with fresh mixture. |
fepetra arahana
- marika: RYOBI
- Modely: BLOWER
- Fifindran'ny motera: 25cc
- Karazana maotera: 2-Ny entona cycle
- Haingam-pandeha ambony indrindra: 160 MPH
- Haben'ny rivotra max: 520 CFM
- Loharano herinaratra: Gas Powered
- Antony endrika: Handheld
- Endri-javatra manokana: Jet Fan Design, Variable Speed Trigger, 3-Position Cruise Control, Anti-Vibe Handle
- UPC: 659821583744
Fampahalalam-baovao momba ny vokatra
Sary vokatra
Lahatsary vokatra ofisialy
Warranty sy fanohanana
For warranty information, technical support, or to order replacement parts, please refer to the official RYOBI webtranonkala na mifandraisa mivantana amin'ny serivisy ho an'ny mpanjifa. Tazomy ho porofon'ny fividiananao ny rosia fividiananao.
- Serivisy ho an'ny mpanjifa: Refer to your product packaging or the official RYOBI webtranokala ho an'ny antsipiriany momba ny fifandraisana.
- Loharano an-tserasera: Visit the RYOBI website for additional manuals, FAQs, and product registration.
