Sava lalana
The Poly Wall Mount for TC10 is designed to provide a secure, elegant, and professional way to position your Poly TC10 device. This mount ensures optimal visibility and accessibility for the TC10, making it an ideal solution for various environments where the TC10 needs to be wall-mounted.
Information momba ny fiarovana
- Always ensure the mounting surface is structurally sound and can support the weight of the mount and the Poly TC10 device.
- Ampiasao ny fitaovana sy kojakoja ilaina amin'ny fametrahana azy. Raha tsy azonao antoka dia manatona matihanina mahay.
- Arovy amin'ny ankizy ny kojakoja kely sy ny fitaovana famonosana mba hisorohana ny loza mety hitranga.
- Aza henjanina loatra ny visy, satria mety hanimba ny toerana fametrahana na ny velaran'ny fametrahana izany.
- Ensure all cables are routed safely to prevent tripping hazards or damage.
Inona no ao anaty boaty
Hamarino fa misy ny singa rehetra alohan'ny hanombohan'ny fametrahana.
- Wall mount for TC10
- Mounting hardware (screws, anchors - specific types may vary based on package)
Fametrahana sy fametrahana
Follow these steps to properly install your Poly Wall Mount for TC10.
Fitaovana ilaina (tsy tafiditra):
- fandavahana
- Screwdriver (Phillips lohan'ny soso-kevitra)
- pensilihazo
- ambaratonga
Dingana fametrahana:
- Mifidiana toerana: Select a suitable wall location for the Poly TC10, ensuring it is at an appropriate height for interaction and visibility. Consider proximity to power outlets and network connections for the TC10.
- Marka fandavahana: Hold the wall mount against the desired location on the wall. Use a pencil to mark the positions for drilling through the mounting holes on the bracket. Use a level to ensure the marks are aligned horizontally.
- Fandavahana lavaka (Drill Pilot Hole): Using an appropriate drill bit size for your wall anchors (if applicable) and screws, drill pilot holes at the marked points.
- Ampidiro ireo vatofantsika (raha ilaina): If drilling into drywall or other hollow surfaces, insert wall anchors into the pilot holes until flush with the wall surface.
- Ampifandraiso amin'ny rindrina ny fitoerany: Align the wall mount with the drilled holes (and anchors). Insert the provided screws through the mount's holes and into the wall/anchors. Tighten the screws securely with a screwdriver, but do not overtighten.
- Mount Poly TC10: Carefully align the Poly TC10 device with the mounted bracket. Gently slide or click the TC10 into place on the wall mount, ensuring it is securely seated and locked. Refer to the Poly TC10's own manual for specific attachment instructions if necessary.
- Fitantanana tariby: Route any necessary cables (power, network) for the TC10 neatly behind or alongside the mount to maintain a clean and professional appearance.
Image: Poly TC10 securely mounted on a wall using the Poly Wall Mount.
Fampiasana ny Mount
The Poly Wall Mount is a passive accessory designed to hold the Poly TC10. Its operation is integrated with the use of the TC10 device itself.
- Once the TC10 is securely mounted, it is ready for use as per its own operational guidelines.
- The mount provides a stable and fixed position for the TC10, allowing for consistent interaction.
- Ensure the TC10 is properly seated in the mount at all times to prevent accidental dislodgement.
fikarakarana
To ensure the longevity and appearance of your wall mount:
- Clean the mount periodically with a soft, dry cloth.
- Fadio ny mampiasa mpanadio na solvents mikikisana, satria mety hanimba ny endrika ivelany izany.
- Tsidiho tsindraindray ny visy fametahana mba hahazoana antoka fa mijanona ho mafy sy azo antoka izy ireo.
Fanamboarana
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| Mahatsiaro ho malalaka eo amin'ny rindrina ny fametrahana azy. | Screws are not tight enough or anchors are not properly seated. | Tighten mounting screws. If still loose, consider using larger anchors or relocating the mount to a stud. |
| Poly TC10 does not fit securely into the mount. | Incorrect orientation or obstruction. | Ensure the TC10 is oriented correctly according to the mount's design. Check for any debris or obstructions in the mounting slot. |
| Scratches on the mount surface. | Fitaovana fanadiovana abrasive ampiasaina. | Use only soft, dry cloths for cleaning. Minor scratches may be permanent. |
fepetra arahana
| endri-javatra | antsipirihany |
|---|---|
| Ny refin'ny vokatra | 7.87 x 4.72 x 1.38 santimetatra |
| Lanja entana | 9 oz |
| Laharana modely | 874P8AA |
| loko | mainty |
| mpanamboatra | Poly |
| Fitaovana mifanentana | Poly TC10 |
| Karazana fametrahana | Wall Mount |
| Inona no ao anaty boaty | Wall mount for TC10 |
Warranty sy fanohanana
For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official Poly website. For technical support or further assistance, please contact Poly customer service through their official support channels.
Official Poly Webtranokala: www.poly.com
