NEO TOOLS 94-006 8-in-1 AC/DC Voltage Boky torolalana ho an'ny mpampiasa

1. Fampidirana sy Fitohizanaview

The NEO TOOLS 94-006 8-in-1 AC/DC Voltage Tester is a versatile and essential tool designed for electricians, mechanics, and anyone working with electrical installations. This device allows for safe and precise measurement of electrical voltage, helping to prevent accidents and ensure correct wiring. It supports a wide voltage range from 6 to 380 V AC/DC.

Equipped with two practical probes and an 80 cm cable, this tester offers eight distinct functions within a single unit, optimizing space in your toolkit. A key feature is its battery-free operation, ensuring readiness without the need for external power. It provides options to verify the presence and value of voltage in both AC and DC circuits, check for zero points in automotive wiring harnesses, and identify phases in electrical panels, facilitating easy error location and correction.

Figure 1: NEO TOOLS 94-006 8-in-1 AC/DC Voltage Tester with probes and cable.

2. Information momba ny fiarovana

WARNING: Always prioritize safety when working with electricity. Failure to follow these safety guidelines may result in electric shock, injury, or death.

• Always inspect the tester for any damage before use. Do not use if the probes, cable, or housing are damaged.
• Ensure your hands are dry and you are standing on a non-conductive surface.
• Aza mihoatra ny voltage amin'ny 380 V AC/DC.
• Manaova fitaovana fiarovana manokana (PPE) sahaza, toy ny fonon-tanana misy sosona fiarovana sy solomaso fiarovana.
• Aza manandrana manokatra na manova ny fitaovana. Tsy misy piesy azo amboarina ao anatiny.
• Use the tester only for its intended purpose as described in this manual.
• Arovy amin'ny ankizy.

3. Toetran'ny vokatra

The NEO TOOLS 94-006 voltage tester offers a range of functionalities for comprehensive electrical diagnostics:

• 8-in-1 Multifunctionality: Combines multiple testing capabilities into a single device.
• Wide Voltage Range: Fandrefesana AC sy DC voltage avy amin'ny 6 V ka hatramin'ny 380 V.
• LED fampisehoana: Clear indication of voltage levels (6V, 12V, 24V, 50V, 110V, 220V, 380V).
• Two Probes: Facilitates measurement between two points.
• 80 cm Cable: Provides adequate reach for various applications.
• Fampiasana tsy misy bateria: No batteries required, ensuring reliability and convenience.
• Zero Point Verification: Useful for checking wiring harnesses in vehicles.
• Phase Testing: Enables identification of live phases in electrical panels.

Figure 2: Key features of the NEO TOOLS 94-006 tester, including 8-in-1 functionality, AC/DC compatibility, 6-380V range, and cable length.

4. Fametrahana

The NEO TOOLS 94-006 voltage tester is designed for immediate use without complex setup procedures. As it operates without batteries, there is no need for battery installation or charging.

1. Esory ny tester: Carefully remove the tester from its packaging.
2. Jereo raha misy fahasimbana: Before first use, visually inspect the entire device, including the probes, insulation, and cable, for any signs of damage, cracks, or exposed wires. If any damage is found, do not use the tester and contact customer support.
3. Fantaro ny tenanao: Observe the LED display and the two probes. Understand how the probes connect to the main unit via the cable.

Figure 3: The NEO TOOLS 94-006 Voltage Tester as it appears in its packaging.

5. Torolàlana miasa

The NEO TOOLS 94-006 tester is straightforward to operate. Follow these steps for various testing scenarios:

5.1. General VoltagFandrefesana e (AC/DC)

1. Ensure the area is safe and you are wearing appropriate PPE.
2. Hold the main body of the tester firmly.
3. Carefully touch one probe to the first point of the circuit to be tested and the other probe to the second point.
4. Observe the LED display. The LEDs will illuminate to indicate the detected voltage level (e.g., 6V, 12V, 24V, 50V, 110V, 220V, 380V). The highest illuminated LED indicates the approximate voltage.
5. Ho an'ny DC voltage, the '+' and '-' indicators on the tester will show the polarity.

Figure 4: Close-up of the tester's LED display indicating voltage niveau.

5.2. Automotive Applications (Zero Point Check)

This function is particularly useful for diagnosing electrical systems in vehicles.

1. Connect one probe to a known good ground point (e.g., vehicle chassis).
2. Use the other probe to touch various points in the wiring harness where you suspect a zero point or ground connection issue.
3. Raha misy voltage is detected, it indicates that the point is not at zero potential or has a fault.

Figure 5: Using the tester to check voltage in a car's accessory socket.

Figure 6: Using the tester to check voltage on a car battery.

5.3. Phase Testing in Electrical Panels

To identify live phases in electrical distribution panels:

1. Ensure all safety precautions are in place.
2. Touch one probe to a known neutral or ground point.
3. Carefully touch the other probe to the terminal or wire you wish to test for a live phase.
4. Raha misy voltage is detected and the corresponding LED illuminates, it indicates a live phase.

Figure 7: The voltage tester being used to check connections within an electrical panel.

6. Fikojakojana

Proper maintenance ensures the longevity and accuracy of your NEO TOOLS 94-006 voltage tester.

• Fanadiovana: Fafao amin'ny lamba maina sy malefaka ilay fitaovana. Aza mampiasa mpanadio abrasive na solvents. Ataovy azo antoka fa tsy misy hamandoana miditra amin'ny fitaovana.
• fitahirizana: Store the tester in a clean, dry place, away from direct sunlight and extreme temperatures. Keep the probes protected to prevent damage.
• Fanaraha-maso tsy tapaka: Periodically inspect the probes, cable, and housing for any signs of wear, cuts, or damage. Replace the device if any damage is observed to ensure safety and accurate readings.

7. Famahana olana

If you encounter issues with your NEO TOOLS 94-006 voltage tester, consider the following common problems and solutions:

• No LED Indication:
  • Ensure both probes are making good contact with the test points.
  • Verify that there is actual voltage present in the circuit. Test on a known live circuit if possible.
  • Check for any visible damage to the probes or cable that might interrupt the circuit.
• Famakiana tsy mifanaraka:
  • Ensure stable contact with the test points.
  • Clean the probe tips if they appear dirty or corroded.
  • The tester provides approximate voltage levels via LED. For precise measurements, a digital multimeter may be required.
• Fahavoazana ara-batana:
  • If the housing, probes, or cable are physically damaged, discontinue use immediately. Using a damaged electrical tester can be hazardous.

If troubleshooting steps do not resolve the issue, contact customer support for further assistance.

8. Famaritana

9. Warranty sy fanohanana

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official NEO TOOLS website. Tehirizo ny porofon'ny fividiananao raha misy fitakiana fiantohana.

If you have questions regarding the operation, maintenance, or troubleshooting of your NEO TOOLS 94-006 voltage tester, please contact NEO TOOLS customer service.