Inkbird ITC-C216T Thermostat Instruction Manual

Sava lalana

Thank you for choosing the Inkbird ITC-C216T Thermostat. This device is a versatile plug-and-play temperature controller designed for precise temperature management in a wide range of applications. It features three control modes: temperature, cycle time, and countdown, along with safety features like high/low temperature alarms and a child lock. This manual will guide you through the setup, operation, and maintenance of your thermostat to ensure optimal performance and safe use.

Information momba ny fiarovana

• Ensure the thermostat is connected to a grounded power outlet.
• Do not exceed the maximum load capacity of 10A, 220V AC (2200W).
• Keep the device away from water, except for the IP67 rated probe.
• Do not attempt to disassemble or repair the unit yourself. Contact customer support if issues arise.
• Esory foana ilay fitaovana alohan'ny hanadiovana na hanaovana fikojakojana.

Vita ny vokatraview

singa

Sary: Detailed diagram of the Inkbird ITC-C216T thermostat with labeled components.

1. LCD misy jiro miverina fotsy: Displays current and set temperatures/times.
2. Bokotra miasa: MODE, UP, SET, DOWN for navigation and setting adjustments.
3. Output: Max 10A (2200W at 220Vac) for connecting heating or cooling devices.
4. Temperature Probe: 2m/79in long, IP67 waterproof for accurate temperature detection.
5. Fampidirana: 100~240Vac 50/60Hz max 10A.
6. Kisary fanafana: Indicates heating operation.
7. Kisary Fampangatsiahana: Indicates cooling operation.
8. Kisary fandrefesana fotoana: Indicates timing function is active.
9. Kisary hidin'ankizy: Midika izany fa miasa ny hidin-jaza (child lock).
10. START: Displays start temperature or time.
11. MIJANÒNA: Displays stop temperature or time.

Endri-javatra fototra

Sary: The Inkbird ITC-C216T thermostat showcasing ny endri-javatra fototra.

• Fampisehoana LCD backlit: Easy to read current and set values, even in low light.
• Fomba fanaraha-maso telo: Temperature, Cycle Time, and Countdown.
• Wide Temperature Range: Controls temperatures from -40°C to 100°C.
• Fanairana momba ny mari-pana ambony/ambany: Sanda fanairana azo amboarina miaraka amin'ny safidy hampanginana ny buzzer.
• Temperature calibration: Allows for fine-tuning temperature readings.
• Cooling Delay: Protects cooling equipment from short cycling.
• Hidin'ankizy: Misoroka fiovana tsy nahy amin'ny fandrindrana.
• Fahatsiarovana asa: Retains all settings after a power interruption.
• Probe tsy tantera-drano IP67: Suitable for use in soil or submerged in water.

Hametraka

1. Vahao: Carefully remove the thermostat and its components from the packaging.
2. Ampidiro: Insert the thermostat into a standard 220V AC grounded power outlet. The LCD display will light up.
3. Mampifandray fitaovana: Plug your heating or cooling device (e.g., heater, fan, refrigerator) into the output socket of the thermostat.
4. Position Probe: Place the waterproof temperature probe in the environment where temperature control is needed (e.g., terrarium, water, soil). Ensure the probe is securely positioned and not directly exposed to heating elements or strong air currents that could affect readings.

Fomba fiasa

The ITC-C216T thermostat supports three main control modes: Temperature Mode, Cycle Time Mode, and Countdown Mode. Please note that Temperature Mode and Timing functions cannot be used simultaneously.

1. Fomba fandrefesana ny mari-pana

Sary: Visual representation of the thermostat's cooling and heating functions.

In Temperature Mode, the thermostat automatically controls your connected device (heater or cooler) to maintain a desired temperature range. The device will operate in heating or cooling mode based on your set START and STOP temperatures.

• Tsindrio ny MODE button repeatedly until the display shows the temperature mode (usually indicated by a thermometer icon).
• mpanao gazety SET to enter setting mode. The START temperature will flash. Use the UP SY MIDINY buttons to adjust the desired START temperature.
• mpanao gazety SET again to confirm and move to the STOP temperature. Adjust the STOP temperature using UP SY MIDINY.
• mpanao gazety SET one more time to save the settings and exit.
• If START temperature is lower than STOP temperature, the thermostat operates in fomba fanafanana.
• If START temperature is higher than STOP temperature, the thermostat operates in fomba fampangatsiahana.

2. Cycle Time Mode (P01)

Sary: Diagram explaining the Cycle Time Mode (P01) operation.

This mode allows you to set a repeating ON/OFF cycle for your connected device. The time range is 0 to 99 hours and 59 minutes.

• mpanao gazety MODE until P01 is displayed.
• mpanao gazety SET. The ON time will flash. Adjust using UP/MIDINY.
• mpanao gazety SET. The OFF time will flash. Adjust using UP/MIDINY.
• mpanao gazety SET to save and exit. The device will now cycle ON and OFF according to your settings.

3. Countdown Mode (P02, P03, P04)

The Countdown Mode offers three sub-modes for specific timed operations:

• P02: Countdown ON
  

  Sary: Diagram explaining the Countdown ON Mode (P02).

  The device will turn ON after the set countdown period.
• P03: Countdown OFF
  

  Sary: Diagram explaining the Countdown OFF Mode (P03).

  The device will turn OFF after the set countdown period.
• P04: Countdown ON & OFF
  

  Sary: Diagram explaining the Countdown ON&OFF Mode (P04).

  The device will turn ON after the first countdown, then turn OFF after a second countdown.

To set any Countdown Mode:

• mpanao gazety MODE until P02, P03, or P04 is displayed.
• mpanao gazety SET. The countdown time(s) will flash. Adjust using UP/MIDINY.
• mpanao gazety SET hamonjy sy hivoaka.

Advanced Settings

Fanombanana ny maripana (CA)

Sary: Thermostat screen showing temperature calibration setting.

If you find that the temperature reading is inaccurate compared to a known reference thermometer, you can calibrate the device:

• Rehefa mandeha ny fitaovana dia tsindrio ary hazòny ny SET button for approximately 3 seconds to enter the parameter settings.
• Ampiasao ny UP/MIDINY buttons to navigate to the 'CA' (Calibration) setting.
• mpanao gazety SET, dia ampiasao UP/MIDINY to adjust the calibration value (e.g., +0.5°C or -0.5°C).
• mpanao gazety SET hanamarina sy hivoaka.

Cooling Delay (Pt)

Sary: Thermostat screen showing refrigeration delay setting.

The cooling delay function prevents rapid cycling of cooling equipment, which can extend its lifespan.

• Enter parameter settings (press and hold SET mandritra ny 3 segondra).
• Navigate to 'Pt' (Cooling Delay).
• Adjust the delay time in minutes using UP/MIDINY.
• mpanao gazety SET hanamarina sy hivoaka.

High/Low Temperature Alarms (AH/AL)

Sary: Thermostat screen showing high temperature alarm with mute option.

Set custom high (AH) and low (AL) temperature alarm values. If the detected temperature exceeds these limits, an audible alarm will sound.

• Enter parameter settings.
• Navigate to 'AH' (High Alarm) or 'AL' (Low Alarm).
• Adjust the alarm temperature using UP/MIDINY.
• mpanao gazety SET hanamafy.
• To mute the buzzer, press any button when the alarm sounds.

Ankizy Lock

Sary: Thermostat displaying the child lock icon.

To prevent accidental changes to settings, activate the child lock:

• Tsindrio ary hazòny ny UP SY MIDINY buttons simultaneously for approximately 3 seconds. The child lock icon will appear on the display.
• Repeat the action to unlock the device.

Fahatsiarovana & Famerenana amin'ny orinasa

• Fahatsiarovana asa: The thermostat automatically saves all your settings. In case of a power outage, the device will resume operation with the last saved settings once power is restored.
• Famerenana amin'ny orinasa: To restore the device to its default factory settings, consult the full user manual or contact Inkbird support for specific instructions.

Applications

Sary: Diverse applications of the Inkbird ITC-C216T thermostat.

The Inkbird ITC-C216T thermostat is suitable for a wide range of temperature control needs, including but not limited to:

• Reptile Terrariums and Aquariums
• Greenhouses and Plant Propagation
• Incubators for Eggs
• Home Brewing and Fermentation
• Controlling Freezers and Refrigerators
• Managing Heating Mats and other Home Appliances

fepetra arahana

Fanamboarana

If you encounter issues with your Inkbird ITC-C216T thermostat, please refer to the following common solutions:

• Tsy mirehitra ny fampisehoana: Ensure the thermostat is securely plugged into a live power outlet. Check the power supply.
• Famakiana mari-pana tsy marina: Verify the probe is correctly placed and not damaged. Perform a temperature calibration (refer to Advanced Settings).
• Tsy mandeha/maty ny fitaovana: Check if the connected heating/cooling device is functioning correctly. Ensure the thermostat is in the correct operating mode (Temperature, Cycle Time, or Countdown) and that settings are properly configured. Verify the child lock is not active.
• Feo tsy an-kijanona ny fanairana: Check the high/low alarm settings (AH/AL) and the current temperature. Adjust alarm values if necessary or mute the buzzer by pressing any button.
• Tsy voatahiry ny fikirana: The device has a memory function. If settings are not retained, try a factory reset (consult full manual) or contact support.

For more detailed troubleshooting or persistent issues, please contact Inkbird customer support.

fikarakarana

• Fanadiovana: Disconnect the thermostat from power before cleaning. Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or immerse the main unit in water.
• Fikarakarana fikarohana: Regularly inspect the temperature probe for any signs of damage. Clean the probe gently if it accumulates debris, especially if used in water or soil.
• fitahirizana: If storing the device for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.

Warranty sy fanohanana

Inkbird products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms, registration, or technical support, please visit the official Inkbird webtranokala na mifandray mivantana amin'ny serivisy mpanjifany.

Afaka mahita fampahalalana bebe kokoa sy loharano fanohanana ianao amin'ny fitsidihana ny Fivarotana Inkbird ao amin'ny Amazon.