PREXISO PLC360SGA 360° Green Laser Level with Tripod User Manual

Sava lalana

This manual provides comprehensive instructions for the safe and effective use of your PREXISO 360° Green Laser Level, model PLC360SGA. This device is designed to project bright green horizontal, vertical, and cross lines for various applications including construction, floor and wall tiling, and general renovation tasks. Please read this manual thoroughly before operating the device.

Information momba ny fiarovana

FAMPITANDREMANA: This is a Class II laser product. Maximum laser output is less than 1mW. Do not stare directly into the laser beam. Avoid direct eye exposure. Use caution when operating the laser level.

• Always operate the laser level in a safe environment.
• Ensure the laser is turned off when not in use or when changing batteries.
• Arovy amin'ny ankizy ny fitaovana.
• The included green glasses are for enhancing visibility of the laser line, not for eye protection against direct laser exposure.

Fonosana fonosana

Hamarino fa ny entana rehetra voatanisa etsy ambany dia tafiditra ao anatin'ny fonosanao:

• 1 x PREXISO 360° Cross Line Laser Level (Model PLC360SGA)
• 1 x 37-1/2 inch Tripod
• 1 x Green Glasses
• 1 x Kitapo azo entina
• 1 x lasibatra kendrena
• 4 x AA Batterie

Image: The PREXISO 360° Green Laser Level shown with its complete set of accessories, including the tripod, green glasses, target plate, carry bag, and AA batteries.

Endriky ny vokatra

• 360° Green Laser Source: Projects a full 360° horizontal line, along with vertical and cross lines. Green laser is significantly brighter than red lasers, offering visibility up to 100 ft.
• Multiple Projecting Modes: Switch independently between horizontal, vertical, and cross line modes.
• Fomba fametahana tena: Automatically levels within ±4° of horizontal. If tilted beyond this range, the laser will blink as an alarm.
• Fomba tanana: Disables self-leveling, allowing the projection of lines at any desired angle.
• Famolavolana maharitra: Features dustproof and shockproof construction for reliability in various work environments.

Image: Visual representation highlighting the dustproof and shockproof design of the laser level, indicating its robust build for demanding work conditions.

Applications

The PREXISO 360° Green Laser Level is suitable for a wide range of tasks:

• Floor and wall tiling
• Chandelier and spotlight installation
• Hanging wall decor and pictures
• Air conditioning installation
• Door and window calibration
• General building structure measurement and layout

Image: Demonstrates the laser level projecting 360° cross lines for room layout, a 360° horizontal line for floor work, and a vertical line for tile installation.

Hametraka

1. Fametrahana bateria: Open the battery compartment latch. Insert 4 AA batteries, ensuring correct polarity. Close the compartment securely.
2. Mounting the Laser Level: The laser level features a 1/4"-20 threaded mount on its base.
   • Fametrahana ny tripod: Attach the laser level to the included tripod using the quick-release plate. Ensure it is securely fastened.
   • Fametrahana: Place the tripod on a stable, level surface. Adjust the tripod legs and rotary lifting rocker to achieve the desired height and initial position.

Image: A detailed diagram showing the dimensions of the laser level and the location of key components such as the power mode button, lock/unlock switch, battery compartment, laser aperture, and 1/4"-20 threaded mount.

Image: An illustration of the included tripod, detailing its features such as the quick-release plate, 1/4" screw mount, neck extension locking, rotary lifting rocker, adjustment buckle, and non-skid rubber feet. Dimensions for collapsed (17 inches) and extended (37.5 inches) states are also shown.

Fomba fiasa

The PREXISO laser level offers two primary operating modes: Self-Leveling Mode and Manual Mode.

1. Fomba fampitoviana tena izy

1. Slide the Lock/Unlock switch to the "UNLOCK" side.
2. The laser level will automatically attempt to self-level.
3. If the device is within ±4° of horizontal, the laser lines will become steady, indicating it is level.
4. If the device is tilted more than 4°, the laser lines will blink continuously as an alarm, indicating it cannot self-level. Adjust the device's position until the blinking stops.
5. Press the Power Mode Button to cycle through horizontal, vertical, or cross line projections.

Image: A visual guide demonstrating the steps for activating and using the Self-Leveling Automatic Mode, including the switch position, power button function, and the blinking alarm for out-of-level conditions.

2. Mode Manual

1. Slide the Lock/Unlock switch to the "LOCK" side. This disables the self-leveling feature.
2. Press and hold the Power Mode Button for 3 seconds to turn on the laser.
3. The laser lines will project at the angle the device is positioned, allowing for angled line projections.
4. Short press the Power Mode Button to switch between horizontal, vertical, or cross line projections.
5. To turn off the laser in Manual Mode, press and hold the Power Mode Button for 3 seconds.

Image: A step-by-step visual explanation of how to engage and use the Manual Mode, showing the "LOCK" switch position and the power button actions for turning on/off and switching laser line modes.

Accessories

Green Glasses

The included green glasses are designed to enhance the visibility of the green laser lines, especially in bright lighting conditions. They are adjustable for comfort. Fanamarihana: These glasses do not provide protection against direct laser exposure.

Takelaka kendrena

The green target plate helps to increase the visibility of the laser line and provides a surface for precise marking or measurement, particularly over longer distances or in challenging lighting.

Image: A split image showing the green laser glasses and a green laser target plate. The glasses are depicted enhancing the visibility of green laser beams, and the target plate is shown in use to mark laser lines.

fikarakarana

• Fanadiovana: Ampiasao malefaka, damp lamba hanadiovana ny fitaovana. Aza mampiasa mpanadio na ranoka manimba.
• fitahirizana: When not in use, store the laser level and its accessories in the portable carry bag in a dry, cool place, away from direct sunlight.
• Fanalana batterie: Raha tsy hampiasaina mandritra ny fotoana maharitra ny fitaovana dia esory ny bateria mba hisorohana ny fivoahan'ny rano sy ny fahasimbana.
• Fanamarinana calibration: Periodically check the accuracy of the laser level. Refer to the specifications for accuracy tolerances.

Fanamboarana

Laser lines are blinking continuously in Self-Leveling Mode.

The device is tilted beyond its self-leveling range (±4°). Adjust the position of the laser level or tripod until it is within the acceptable range. The blinking will stop when it successfully self-levels.

Ny tsipika laser dia manjavozavo na tsy hita.

• Jereo ny haavon'ny bateria ary soloy raha ilaina.
• Ensure the laser aperture is clean and unobstructed.
• Use the included green glasses and target plate to enhance visibility, especially in bright environments.

Laser level does not turn on.

• Hamarino tsara fa napetraka tsara ny bateria ary ampy tsara ny famatrarana azy.
• Ensure the Lock/Unlock switch is in the correct position for the desired operating mode (UNLOCK for self-leveling, LOCK then hold power button for manual).

fepetra arahana