PREXISO 360° Self-Leveling Green Laser Level

1. Fampidirana

This manual provides detailed instructions for the safe and effective operation of your PREXISO 360° Self-Leveling Green Laser Level, Model PLC3-360GB. This device is designed for various leveling and alignment tasks in construction, home renovation, and other applications requiring precise horizontal and vertical lines.

2. Information momba ny fiarovana

FAMPITANDREMANA: Vakio tsara ny fampitandremana sy ny toromarika rehetra momba ny fiarovana alohan'ny hampiasana ity vokatra ity.

• This product is a Class II laser device with a maximum laser output of < 1mW.
• Do not stare directly into the laser beam. Avoid direct eye exposure.
• Aza mikendry olona na biby ny taratra laser.
• Use the included green laser glasses to enhance visibility of the laser line. These glasses are not safety glasses and do not protect against direct laser exposure.
• Arovy amin'ny ankizy ny fitaovana.
• Do not attempt to modify or disassemble the laser level. This can lead to hazardous laser radiation exposure.
• Operate the device in a well-lit environment to reduce the risk of accidental exposure.

Image: The PREXISO green laser level highlighting its safety classification (Class II, < 1.0 mW) and brightness.

3. Ny votoatin'ny fonosana

Hamarino fa ny entana rehetra voatanisa etsy ambany dia tafiditra ao anatin'ny fonosanao:

• 1 x PREXISO 360° Green Laser Level
• 1 x 37.5-inch Tripod
• 1 x Green Laser Glasses
• 1 x Magnetic Pivoting Base
• 1 x Type-C Charging Cable
• 1 x kitapo portable

Image: All components included with the PREXISO 360° Green Laser Level, including the laser unit, tripod, magnetic base, green glasses, charging cable, and portable bag.

4. Vokatra mihoatraview

Familiarize yourself with the main components of your laser level:

Image: Detailed diagram showing the keypad, Type-C charging port, laser aperture, lock/unlock switch, and 1/4"-20 threaded mount on the PREXISO laser level.

• Keypad: Controls operating modes and laser lines.
• Laser Aperture: Emits the green laser beams.
• Hidio/Vahavaha ny Switch: Activates self-leveling mode (ON) or manual mode (OFF).
• 1/4"-20 Threaded Mount: For attachment to the tripod or magnetic bracket.
• Type-C seranan-tsambo: For recharging the lithium battery.

5. Fametrahana

5.1. Fametrahana sy famandrihana bateria

1. Ensure the laser level is switched to the "OFF" position.
2. Insert the rechargeable lithium battery into the battery compartment.
3. Connect the Type-C charging cable to the laser level and a suitable USB power adapter (not included). The battery can also be charged separately.
4. The laser level can be operated directly by plugging in the Type-C cable even if the battery is removed.

Image: Illustration of the dual power source, showing the 3.7V Lithium-ion battery being charged and the Type-C charging port for direct plugging.

5.2. Fametrahana ny haavon'ny laser

The laser level offers multiple installation methods:

• Fametrahana ny tripod: Attach the laser level to the included 37.5-inch tripod using the 1/4"-20 threaded mount. Adjust the tripod height and angle as needed.
• Magnetika fototra: Attach the laser level to the magnetic pivoting base. This base can then be secured to metallic surfaces, allowing for 360° rotation.
• Fametrahana mivantana: The compact design allows the laser level to be placed directly on the ground or other flat surfaces for tasks like tile laying.

Image: Details of the adjustable tripod, including quick release plate, 1/4"-20 screw mount, neck extension locking, rotary lifting rocker, adjustment buckle, and non-skid horseshoe rubber feet. Also shows the magnetic bracket.

6. Fomba fiasa

The PREXISO laser level features 5 leveling modes, easily switchable via the H/V button.

Image: Diagram illustrating the 5 available operating modes: 360° Horizontal Plane, 360° Horizontal + 2x360° Vertical Plane, 360° Horizontal + 360° Vertical (front) Plane, 2x360° Vertical Plane, and 360° Vertical Plane.

6.1. Fomba fampitoviana tena izy

1. Slide the Lock/Unlock switch to the "ON" side.
2. The tool will automatically self-level within a range of ±4° of horizontal.
3. If the surface tilt exceeds 4 degrees, the laser lines will blink as an alarm, indicating that the device is out of level. Adjust the position until the lines stabilize.
4. Press the H/V button to cycle through the desired laser line configurations (horizontal, vertical, or cross lines).

Image: Visual guide for activating self-leveling automatic mode, showing the switch to "ON", pressing H/V to switch lines, and the laser turning off if tilt exceeds 4 degrees.

6.2. Manual Mode (Lock Mode)

1. Slide the Lock/Unlock switch to the "OFF" side (locked position).
2. Press and hold the H/V button for 3 seconds to turn on the laser.
3. In manual mode, the self-leveling feature is disabled, allowing you to project laser lines at any desired angle.
4. Short press the H/V button to switch between horizontal, vertical, or cross modes.

Image: Step-by-step instructions for activating manual mode: slide switch to "LOCK", press and hold H/V for 3 seconds, then short press H/V to switch lines.

6.3. Pulse Mode (Outdoor Mode)

1. Activate the desired laser lines in either self-leveling or manual mode.
2. Press the pulse mode button (often indicated by a receiver icon) on the keypad.
3. In pulse mode, the laser lines flash at a high frequency, making them detectable by an optional laser receiver (sold separately).
4. This mode extends the working range up to 196 feet (60 meters) in bright light or outdoor conditions. Note that the laser lines may appear less visible to the naked eye in this mode.

Image: The PREXISO laser level in pulse mode, demonstrating its ability to extend the working range up to 196 feet with a laser receiver (not included).

7. Fampiharana

The PREXISO 360° Self-Leveling Green Laser Level is suitable for a wide range of tasks, including but not limited to:

• Construction layout
• Installing drop ceilings
• Framing windows and doors
• Wall tiling and rough carpentry
• Fametrahana kabinetra
• Hanging pictures and shelves
• Electrical wiring and pipe installation

Image: Collage showing the PREXISO laser level being used for construction layout, drop ceiling installation, framing windows and doors, wall tiling, rough carpentry, and cabinet installation.

8. Misy Accessories

8.1. Adjustable Frame Green Glasses

The included green glasses are designed to enhance the visibility of the green laser line, especially in bright conditions. They feature an adjustable frame for a comfortable fit, even over prescription glasses.

Image: Close-up of the adjustable frame green glasses, showing their design and adjustability for improved laser line visibility.

8.2. Tripod and Magnetic Bracket

The 37.5-inch tripod provides a stable platform for the laser level, allowing for precise height and angle adjustments. The magnetic pivoting bracket offers versatile mounting options on metallic surfaces and allows for 360° rotation of the laser level.

9. Fikojakojana

• Clean the laser level regularly with a soft, damp lamba. Aza mampiasa akora simika mahery vaika na fanadiovana maloto.
• Keep the laser apertures clean and free from dust or debris to ensure optimal beam clarity.
• Store the device in the included portable bag in a dry, cool place when not in use.
• Fadio ny mampiharihary ny fitaovana amin'ny hafanana tafahoatra na ny tara-masoandro mivantana mandritra ny fotoana maharitra.
• Raha tsy ampiasaina mandritra ny fotoana maharitra ilay fitaovana dia esory ny bateria.

10. Famahana olana

11. Famaritana

12. Warranty sy fanohanana

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Prexiso website. Contact information for customer service is typically provided on the product packaging or within the warranty documentation.