REPTITRIP Reptile Fogger User Manual

1. Fampidirana

Thank you for choosing the REPTITRIP Reptile Fogger. This device is designed to provide optimal humidity levels for amphibians, reptiles, and ecological rainforest terrariums. It features constant humidity control, a timer function, and a 4-liter capacity, ensuring a stable and healthy environment for your pets. Please read this manual thoroughly before operation to ensure proper use and maintenance.

Image 1: The REPTITRIP Reptile Fogger, showing the main unit, flexible hose, remote control, and external sensor.

2. Torolàlana momba ny fiarovana

• Always unplug the unit from the power outlet before filling, cleaning, or performing any maintenance.
• Aza atsoboka ao anaty rano na ranon-javatra hafa ny singa fototra.
• Hamarino tsara fa tsy simba ny tariby herinaratra ary apetraka amin'ny toerana tsy ahafahana mampivadika na misintona azy.
• Use only clean, distilled, or demineralized water to prevent mineral buildup and ensure optimal performance.
• Arovy amin'ny ankizy sy ny biby fiompy.
• Do not block the mist outlet or air intake vents.
• Operate the unit on a stable, flat surface to prevent tipping.
• If the unit emits unusual sounds, smells, or smoke, unplug it immediately and discontinue use.

3. Ny votoatin'ny fonosana

Azafady, jereo ny fonosana ho an'ireto zavatra manaraka ireto:

• REPTITRIP Reptile Fogger Main Unit (4L water tank)
• Flexible Adjustable Hose
• Fanaraha-maso lavitra
• External Temperature & Humidity Sensor Probe
• User Manual (ity antontan-taratasy ity)

4. Singa sy Kisarisary momba ny Vokatra

Familiarize yourself with the different parts of your REPTITRIP Reptile Fogger.

1. Tobin-drano (mahazaka 4L)
2. Base Unit with Control Panel (Touch Screen)
3. Mist Outlet Nozzle
4. Flexible Hose Connector
5. Port Sensor ivelany
6. Tady herinaratra
7. Fanaraha-maso lavitra

Image 2: The fogger's display highlighting the two primary operation modes: Time Setting and Humidity Control.

5. Fametrahana

5.1 Famoahana sy fametrahana

• Esory ny fitaovana famonosana rehetra.
• Place the fogger on a flat, stable surface near the terrarium. Ensure there is enough space around the unit for proper ventilation.

5.2 Famenoana ny Tobin-drano

1. Lift the water tank from the base unit.
2. Esory ny satrony eo ambanin'ny tank.
3. Fill the tank with clean, distilled, or demineralized water. Do not exceed the maximum fill line.
4. Securely screw the cap back on.
5. Avereno eo amin'ny fototra ny fitoeran-drano feno, ary ataovy izay hipetrahany tsara.

5.3 Connecting the Hose and Sensor

• Connect one end of the flexible hose to the mist outlet nozzle on the top of the fogger.
• Route the other end of the hose into your terrarium, positioning the mist outlet where desired.
• Plug the external temperature and humidity sensor probe into its designated port on the base unit.
• Place the sensor inside the terrarium, away from the direct mist path, to accurately measure ambient conditions.

5.4 Fampifandraisana herinaratra

• Plug the power cord into a standard electrical outlet. The unit will beep, and the display will illuminate.

6. Fampandehanana

6.1 Fanaraha-maso sy fanaraha-maso lavitra

The fogger can be operated via the touch screen control panel on the base unit or the included remote control. Both offer similar functionalities.

• SET/ON/OFF Button: Powers the unit on/off and enters setting modes.
• Bokotra OK: Confirms selections in setting modes.
• bokotra '+' sy '-': Adjust values (time, humidity, mist level) and navigate menus.

6.2 Fomba fiasa

The REPTITRIP Fogger offers two main operating modes: Famantarana ny fotoana SY Fomba hamandoana. These modes operate independently.

Image 3: The fogger's versatility for various applications, including terrarium humidification and indoor plant care.

6.2.1 Asa fandrefesana fotoana

This mode allows you to schedule humidification cycles based on specific intervals and durations.

1. Tsindrio ny SET button to enter the timing settings.
2. Ampiasao ny '+' SY '-' bokotra hametrahana ny hatetika (interval between humidification cycles, from 1 hour to 7 days). Press OK hanamafy.
3. Set ny Faharetana (how long the fogger will mist during each cycle, from 10 seconds to 1 hour). Press OK hanamafy.
4. The display will show the next humidification time and current humidity.

6.2.2 Humidity Mode (Constant Humidity)

This mode maintains a desired humidity range by automatically turning the fogger on and off based on sensor readings.

1. Tsindrio ny SET button until the humidity setting appears.
2. Ampiasao ny '+' SY '-' bokotra hametrahana ny Hamandoana ambany indrindra isan-jatotage. mpanao gazety OK hanamafy.
3. Set ny Hamandoana ambony indrindra isan-jatotage. mpanao gazety OK hanamafy.
4. The fogger will now automatically activate when humidity drops below the minimum and stop when it reaches the maximum. The current humidity value will be displayed.

Image 4: A graphical representation demonstrating the REPTITRIP fogger's ability to maintain a consistent humidity range.

6.3 Fog Adjustment

The fogger offers three levels of mist output, allowing you to control the rate of humidification.

• In either Timing or Humidity mode, use the '+' SY '-' buttons on the control panel or remote to cycle through the three mist levels.
• Mist levels correspond to approximately 100ml/hr, 200ml/hr, and 300ml/hr water consumption.

Image 5: Visual representation of the three adjustable mist output levels.

6.4 Auto Shut-off

The REPTITRIP Fogger is equipped with an automatic shut-off feature. When the water level in the tank is too low, an icon will appear on the display, and the atomizer will automatically power down to prevent damage and ensure safety.

7. Fikojakojana

Regular cleaning is essential for optimal performance and longevity of your fogger.

7.1 Cleaning the Water Tank and Base Unit

1. Esory ny fitaovana ary esory ny fitoeran-drano.
2. Empty any remaining water from the tank and the base unit.
3. Wipe the inside of the water tank and the base unit (especially the transducer/atomizer disc) with a soft cloth.
4. For mineral buildup, use a solution of white vinegar and water (1:1 ratio). Let it soak for 15-20 minutes, then gently scrub with a soft brush and rinse thoroughly.
5. Ataovy azo antoka fa maina tanteraka ny ampahany rehetra alohan'ny hanangonana azy indray.

7.2 Cleaning the Hose and Sensor

• Periodically check the flexible hose for any condensation or debris. Clean with a mild soap and water solution if necessary, and rinse thoroughly.
• Wipe the external sensor probe with a dry, soft cloth. Do not use harsh chemicals or immerse the sensor in water.

8. Famahana olana

If you encounter issues with your REPTITRIP Fogger, please refer to the following common problems and solutions:

9. Famaritana

10. Warranty sy fanohanana

This product typically comes with a limited warranty. Please refer to your purchase documentation for specific warranty terms and duration. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact the seller or REPTITRIP customer service through the platform where the product was purchased.

Politika famerenana: The standard return policy for this product is 30 days from the date of purchase for refund or replacement.