Nutone 69355000 Replacement Heat Motor Assembly User Manual

1. Vokatra mihoatraview

This document provides instructions for the installation, operation, and maintenance of the Nutone 69355000 Replacement Heat Motor Assembly. This assembly is designed to replace the original heat motor and blower wheel in compatible Nutone heater units, restoring their heating and air circulation functionality.

1.1 Ny votoatin'ny fonosana

• One (1) Blower assembly with motor, mount, and blower wheel.

1.2 Mifanaraka

The Nutone 69355000 Replacement Heat Motor Assembly is compatible with the following Nutone heater models:

• Nutone 9012
• Nutone 9013
• Nutone 9093
• Nutone 9605
• Nutone 9665

An image showing the Nutone 69355000 replacement heat motor assembly. It consists of a motor unit with electrical wires, a mounting plate, and a squirrel cage blower wheel attached to the motor shaft.

2. Information momba ny fiarovana

Please read and understand all safety instructions before attempting installation or maintenance. Failure to follow these instructions may result in electric shock, fire, or personal injury.

• Tapaka ny hery: Always ensure that the electrical power to the heater unit is turned OFF at the circuit breaker or fuse box before beginning any installation, maintenance, or repair work. Verify power is off with a voltage tester.
• Mpiasa mahafeno fepetra: Installation and servicing should be performed by qualified personnel familiar with local codes and regulations.
• Wiring mety: Ensure all electrical connections are made securely and correctly according to the original unit's wiring diagram and local electrical codes.
• Jereo ny singa: Before installation, inspect the new motor assembly for any signs of damage. Do not install damaged components.
• Manao fitaovam-piarovana: Manaova fitaovana fiarovana manokana, toy ny solomaso fiarovana sy fonon-tanana, mandritra ny fametrahana.

3. Torolàlana momba ny fametrahana

This section outlines the general steps for replacing the heat motor assembly. Specific procedures may vary slightly depending on your exact Nutone heater model. Refer to your original heater unit's manual for detailed disassembly and reassembly instructions.

3.1 Fitaovana ilaina

• Screwdriver (Phillips and/or flathead, as needed)
• Wire strippers/cutters
• Wire nuts or electrical connectors
• BOKYtage tester
• fonon-tanana miasa
• Solomaso fiarovana

3.2 Replacement Steps

1. Tapaka ny hery: Locate the circuit breaker or fuse that supplies power to the heater unit and turn it OFF. Use a voltage tester to confirm that power is completely disconnected at the unit.
2. Access the Heater Unit: Carefully remove the grille or cover of your Nutone heater unit to expose the internal components. This may involve unscrewing fasteners or releasinklipy g.
3. Remove Old Motor Assembly: Disconnect the electrical wires from the old motor assembly. Note the wiring configuration for correct reinstallation. Unscrew or unclip the old motor assembly from its mounting bracket or housing. Carefully remove the old unit.
4. Manomana ny fanamboarana motera vaovao: The new Nutone 69355000 assembly comes with the motor, mount, and blower wheel pre-assembled. Ensure the blower wheel is securely attached to the motor shaft.
5. Mametraha Fivorian'ny Motera Vaovao: Position the new motor assembly into the heater unit's housing, aligning it with the mounting points. Secure it with the appropriate screws or clips, ensuring it is firmly in place and does not wobble.
6. Connect Wiring: Connect the electrical wires from the heater unit to the new motor assembly. Use wire nuts or appropriate electrical connectors to ensure secure and insulated connections. Match the wiring configuration noted during removal of the old unit.
7. Reassemble Unit: Carefully replace the grille or cover of the heater unit, ensuring all fasteners are tightened and the cover is securely in place.
8. Avereno ny hery sy ny fitsapana: Turn the power back ON at the circuit breaker or fuse box. Test the heater unit to ensure the new motor assembly operates correctly, providing heat and proper airflow. Listen for any unusual noises.

4. Fampandehanana

The Nutone 69355000 Replacement Heat Motor Assembly functions as the core component for circulating heated air within your compatible Nutone heater unit. Once properly installed, its operation is controlled by the existing switches and thermostat of your heater unit. When the heater is activated, the motor drives the blower wheel, drawing in cool air, passing it over the heating element (if applicable to your unit), and expelling warm air into the room.

5. Fikojakojana

Regular maintenance helps ensure the longevity and efficient operation of your heater unit and its motor assembly.

• Fanapahan-jiro: Tapaho foana ny herinaratra amin'ilay fitaovana alohan'ny hanaovana fikojakojana.
• Fanadiovana: Periodically remove the heater grille and gently clean the blower wheel and motor housing with a soft brush or vacuum cleaner to remove dust and debris. Accumulation of dust can reduce efficiency and cause overheating.
• Fanaraha-maso: Annually inspect the motor assembly for any signs of wear, loose connections, or unusual vibrations. Ensure the blower wheel spins freely without obstruction.
• fanosorana: This motor assembly is typically sealed and does not require lubrication. Do not attempt to lubricate the motor unless specifically instructed by the manufacturer of your heater unit.

6. Famahana olana

If your heater unit is not functioning correctly after installing the replacement motor assembly, refer to the following common issues and solutions:

If troubleshooting steps do not resolve the issue, it is recommended to consult a qualified electrician or HVAC technician.

7. Famaritana ara-teknika

8. Warranty sy fanohanana

For warranty information and customer support regarding the Nutone 69355000 Replacement Heat Motor Assembly, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.