Sava lalana
This manual provides detailed instructions for the installation, operation, and maintenance of your Gladiator 2020GT Radioray Wired Dash Control 65 Watt Halogen Work Light. Please read this manual thoroughly before using the product to ensure proper function and longevity.
The Gladiator 2020GT is a professional-grade, 12-volt permanent mount work light featuring a 65-watt halogen bulb and a wired dash control for precise directional adjustments. It is designed for various applications, including RVs, trucks, and marine vessels, requiring reliable and powerful illumination with 360-degree rotation capability.
Fametrahana sy fametrahana
The Gladiator 2020GT Radioray Work Light is designed for permanent mounting and hardwired installation. Professional installation is recommended for optimal performance and safety.
Component Overview
This image displays the Gladiator 2020GT Radioray Work Light, a white, rectangular spotlight unit with a clear halogen bulb visible. To the right, a black wired dash control unit with two rotary knobs is shown, designed for mounting on a vehicle's dashboard.
Mounting the Light Unit
- Select a stable, flat surface for permanent mounting, ensuring clear line of sight and unobstructed rotation.
- Secure the light unit base using appropriate fasteners (not included) suitable for the mounting surface. Ensure a watertight seal if installed in an exposed environment.
Wiring ny System
- The system operates on a 12-volt DC power supply. Connect the power wires from the light unit and the dash control to a fused 12V power source, observing correct polarity.
- Route all wiring securely, protecting it from abrasion, heat, and moisture.
- Install the wired dash control unit in a convenient location on the vehicle's dashboard, ensuring all connections are firm and insulated.
Torolàlana miasa
The wired dash control unit provides full command over the work light's functions.
Mamelona/Efa
- Locate the power switch or button on the dash control unit.
- Press or toggle the switch to turn the light ON or OFF.
Directional Control (360 Degree Rotation)
- The dash control unit features two rotary knobs or joysticks for directional movement.
- One control typically manages horizontal (pan) movement, allowing for 360-degree rotation.
- The other control manages vertical (tilt) movement, adjusting the beam's elevation.
- Gently manipulate the controls to direct the light beam to the desired position.
fikarakarana
Regular maintenance ensures the longevity and optimal performance of your work light.
- Fanadiovana: Periodically clean the exterior of the light unit and the lens with a soft, damp cloth. Avoid abrasive cleaners that could scratch the lens.
- Fifandraisana elektrika: Annually inspect all wiring and connections for signs of wear, corrosion, or looseness. Ensure all connections remain secure and properly insulated.
- Fanoloana takamoa: The light uses a 65-watt halogen bulb. If the bulb fails, replace it with an identical type and wattage. Disconnect power before attempting bulb replacement. Refer to the manufacturer's instructions for specific bulb access and replacement procedures.
- Fametrahana fiarovana: Check the mounting hardware periodically to ensure the light unit remains securely fastened to its surface.
Fanamboarana
If you encounter issues with your Gladiator 2020GT work light, refer to the following common troubleshooting steps:
- Tsy mirehitra ny jiro:
- Check the 12V power supply and ensure it is active.
- Verify that all electrical connections are secure and correctly polarized.
- Inspect the fuse in the power circuit; replace if blown.
- Check the halogen bulb for filament breakage; replace if necessary.
- Light Does Not Rotate/Tilt:
- Ensure the light is receiving power.
- Check the wiring connections to the dash control unit and the light's motor assembly.
- Verify that the dash control unit is functioning correctly.
- Fihetseham-po miato:
- Jereo raha misy fifandraisana tariby mivaha na harafesina.
- Ensure the power source is stable and not experiencing voltage miovaova.
If problems persist after attempting these steps, contact customer support for further assistance.
fepetra arahana
| mpanamboatra | Golight |
| Marika | Gladiator |
| Laharana modely | 2020GT |
| Karazana takamoa | Halogen |
| Wattage | 65 Watt |
| BOKYtage | 12 Volts |
| Lanja entana | 5 kg |
| Ny refin'ny vokatra | 6 x 4 x 4 santimetatra |
| Karazana fametrahana | Tendrombohitra maharitra |
| Karazana fanaraha-maso | Wired Dash Control |
Warranty sy fanohanana
Warranty Information
The Gladiator 2020GT Radioray Wired Dash Control Work Light comes with a Garantie iray taona manomboka amin'ny datin'ny fividianana. Ity antoka ity dia mandrakotra ny lesoka amin'ny fitaovana sy ny asa tanana amin'ny fampiasana mahazatra. Tsy mandrakotra ny fahasimbana vokatry ny fametrahana tsy mety, ny fampiasana diso, ny loza, na ny fanovana tsy nahazoana alalana.
Fanohanana ny mpanjifa
For technical assistance, warranty claims, or questions regarding your product, please contact Gladiator customer support. Have your product model number (2020GT) and proof of purchase available when contacting support.
Contact information can typically be found on the product packaging or the official Gladiator website.
