LEDONE 8FT LED Vapor Tight Light Instruction Manual

1. Fampidirana

This manual provides detailed instructions for the safe installation, operation, and maintenance of your LEDONE 8FT LED Vapor Tight Light. Please read this manual thoroughly before installation and retain it for future reference. This fixture is designed for demanding environments requiring high resistance to water, dust, and corrosion, such as parking garages, car washes, cold storage, and industrial facilities.

2. Information momba ny fiarovana

WARNING: Risk of electric shock. Disconnect power before installation or servicing.

• Installation must be performed by a qualified electrician in accordance with the National Electrical Code (NEC) and local codes.
• Ataovy azo antoka ny famatsiana voltage is compatible with the fixture's requirements (120-277Vac).
• Do not handle energized fixtures with wet hands or while standing on wet or damp surfaces.
• Do not attempt to modify or disassemble the fixture. There are no user-serviceable parts inside.
• Manaova fitaovana fiarovana manokana (PPE) sahaza mandritra ny fametrahana.
• Ensure the fixture is securely mounted to prevent falling.

3. Ny votoatin'ny fonosana

Hamarino fa misy ny singa rehetra ary tsy misy simba alohan'ny hanohizana ny fametrahana.

• LEDONE 8FT LED Vapor Tight Light Fixture
• Mounting Hardware (clips, screws, anchors)
• Boky torolàlana (torolàlana ity)

4. Fametrahana sy fametrahana

4.1. Alohan'ny fametrahana

1. Vonoy ny herinaratra: Locate the circuit breaker or fuse box and turn off the power supply to the installation area. Verify power is off using a voltage tester.
2. Vahao: Carefully remove the fixture from its packaging. Inspect for any shipping damage.
3. Safidio ny Wattage and Color Temperature (CCT): Before mounting, adjust the wattage and CCT switches located on the fixture. These switches allow you to select between 60W, 80W, or 100W and 3500K, 4000K, or 5000K. Make your selection based on your lighting requirements.

Image: Product dimensions and location of wattage/CCT selection switches.

4.2. Fametrahana ny Fixture

The fixture is designed for surface mounting. Use the provided mounting clips and hardware.

1. Mark the desired mounting locations on the ceiling or wall. Ensure the marks are level and spaced appropriately for the fixture's length.
2. Drill pilot holes at the marked locations. Insert wall anchors if mounting into drywall or masonry.
3. Secure the mounting clips to the surface using the provided screws.
4. Snap the LED vapor tight fixture into the mounted clips, ensuring it is firmly seated.

Sary: Eksample of surface mounting in a facility.

Image: Detail of the linkable design feature.

4.3. Wiring elektrika

This fixture supports 0-10V dimming. Follow the wiring diagram below and local electrical codes.

• Connect ny Mainty tariby avy amin'ny fitaovana mankany amin'ny tsipika (L) tariby avy amin'ny famatsiana herinaratra.
• Connect ny White tariby avy amin'ny fitaovana mankany amin'ny Tsy miandany (N) tariby avy amin'ny famatsiana herinaratra.
• Connect ny Maitso tariby avy amin'ny fitaovana mankany amin'ny tany (GND) tariby avy amin'ny famatsiana herinaratra.
• For 0-10V dimming: Connect the LAMBA VOLOMPARASY tariby avy amin'ny fitaovana mankany amin'ny Dim+ wire from the 0-10V dimmer. Connect the Mavokely/Mavokely tariby avy amin'ny fitaovana mankany amin'ny pahina wire from the 0-10V dimmer.
• Ensure all connections are secure using appropriate wire connectors.

Note: If 0-10V dimming is not used, cap the purple and pink/gray wires individually with wire nuts.

5. Torolàlana miasa

1. Herim-batana: Once installation and wiring are complete, restore power to the circuit at the breaker or fuse box. The fixture should illuminate.
2. Manjavozavo: If connected to a compatible 0-10V dimmer, adjust the dimmer control to achieve the desired light output level.
3. Wattage and CCT Adjustment: Wattage and CCT are set via internal switches during installation. These are not typically adjusted during normal operation. If changes are needed, disconnect power before accessing the switches.

6. Fikojakojana

The LEDONE Vapor Tight Light is designed for long-term, low-maintenance operation. Regular cleaning can help maintain optimal light output.

• Fanadiovana: Tapaho ny herinaratra alohan'ny hanadiovana. Ampiasao malefaka, damp cloth with a mild, non-abrasive cleaner to wipe the exterior of the fixture. Do not use harsh chemicals or abrasive pads, as these can damage the finish or lens.
• Fanaraha-maso: Periodically inspect the fixture and mounting hardware for any signs of damage, loose connections, or wear. Address any issues promptly.
• Tsy misy ampahany azo ampiasaina amin'ny mpampiasa: The LED light source and driver are integrated components. Do not attempt to open or repair the fixture. Contact qualified personnel for any issues beyond basic cleaning and inspection.

Image: The IP65 waterproof rating ensures durability in wet conditions.

7. Famahana olana

Before performing any troubleshooting, ensure power is disconnected at the circuit breaker.

8. Famaritana

Image: Key features and certifications of the LEDONE Vapor Tight Light.

9. Fampahalalana momba ny fiantohana

LEDONE products are manufactured to high quality standards. This product comes with a standard manufacturer's warranty. Please refer to the product packaging or the official LEDONE webtranonkala hahazoana fepetra sy fifanarahana manokana momba ny fiantohana. Tazomy ny porofon'ny fividiananao ho an'ny fangatahana fiantohana.

10. Fanohanana ny mpanjifa

If you have any questions, require technical assistance, or need to report an issue, please contact LEDONE customer support:

• Webtranokala: Visit the LEDONE Store on Amazon (for general inquiries)
• mailaka: Jereo ny fonosana vokatra na ny taratasy ofisialy website for direct support email.
• Telefaonina: Jereo ny fonosana vokatra na ny taratasy ofisialy website for direct support phone number.

Please have your product model number (8FT LED Vapor Tight Light) and proof of purchase ready when contacting support.