BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light

Sava lalana

This manual provides detailed instructions for the safe installation, operation, and maintenance of your BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

Endriky ny vokatra

• Integrated Motion Sensor: Built-in PIR infrared motion detector with a 120° detection angle and a range of 10ft (semidiameter).
• Adjustable Hold Time: Selectable light-on duration of 30 seconds, 120 seconds, or 180 seconds after motion detection.
• Fomba fiasa telo:
  • Fomba AUTO: Light activates when motion is detected in dark conditions.
  • ON Mode: Light remains constantly on.
  • Fomba G: Light activates when motion is detected in both daytime and nighttime conditions.
• Temperature telo loko: Selectable color temperatures of 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White) via a toggle switch before installation.
• Famolavolana faran'izay manify: Low-profile design with a diameter of 8.7 inches and a thickness of 0.99 inches, suitable for various spaces.
• Fametrahana zavatra maro: Can be installed as a flush mount on ceilings or walls.

Figure 1: Illustration of the three operating modes (AUTO, ON, G) and their activation conditions.

Figure 2: Detail of the color temperature toggle switch and motion sensor on the light fixture.

Fonosana fonosana

Hamarino fa misy ny singa rehetra alohan'ny hanombohan'ny fametrahana:

• 1x Corded Motion Activated Ceiling Light
• 1x Mounting Hardware Package (screws, wire nuts, plastic bracket)
• 1x Boky Torolalana (ity antontan-taratasy ity)

Figure 3: Contents of the BLNAN Motion Sensor LED Ceiling Light package.

Information momba ny fiarovana

FAMPITANDREMANA: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring. Always follow local electrical codes.

• Ensure the power supply is OFF before handling any wiring.
• This fixture is designed for 120V AC power supply.
• Aza manandrana manova ny fitaovana.
• Ataovy lavitra ny toerana fametrahana ny ankizy.

Fametrahana & Fametrahana

Araho ireto dingana ireto mba hametrahana araka ny tokony ho izy:

1. Miomana amin'ny fametrahana:
   • Vonoy ny herinaratra eo amin'ny "circuit breaker" alohan'ny hanombohana.
   • Before mounting, select your desired color temperature (3000K, 4000K, or 5000K) using the toggle switch located on the back of the fixture.
2. Mametraka bracket:
   • Rotate and remove the plastic mounting bracket from the light fixture.
   • Attach the plastic bracket to your existing junction box using the provided screws. The bracket is designed for junction boxes with 2.75"-3.7" apart screw holes.
3. Wire fifandraisana:
   • Connect the wires from the light fixture to your household wiring: Black to Black (Live), White to White (Neutral), and Green to Green/Bare Copper (Ground). Secure connections with wire nuts.
   • Use the hanging rope to temporarily support the fixture during wiring.
4. Tendrombohitra ny jiro (mount the light fixture):
   • Ampidiro amim-pitandremana ny tariby rehetra ao amin'ny boaty junction.
   • Align the light fixture with the installed mounting bracket and rotate it clockwise until it locks securely into place.
5. Ampodio hery: Avereno ny herinaratra amin'ny fiatoana.

Sary 4: Torolalana hita maso ho an'ny dingana fametrahana.

Torolàlana miasa

The light fixture features adjustable settings for operating mode and hold time. These settings are controlled by small switches located near the motion sensor on the fixture's surface.

1. Misafidiana fomba fiasa:
   • Locate the mode switch (labeled AUTO, ON, G).
   • Slide the switch to your desired mode:
   • CAR: Motion and light sensor activated. Light turns on only when motion is detected in dark conditions.
   • ON: Light remains continuously on, regardless of motion or ambient light.
   • G: Motion sensor activated. Light turns on when motion is detected, both during the day and at night.
2. Adjusting Hold Time:
   • Locate the hold time switch (labeled 30S, 120S, 180S).
   • Slide the switch to set how long the light remains on after motion is no longer detected:
   • 30S: 30 segondra
   • 120S: 120 segondra (2 minitra)
   • 180S: 180 segondra (3 minitra)

Figure 5: Switches for adjusting hold time and operating modes.

fikarakarana

Regular maintenance ensures optimal performance and longevity of your LED ceiling light.

• Fanadiovana: Turn off power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• LED androm-piainany: The integrated LED light source has an average lifespan of 30,000 hours and is not user-replaceable.
• Fanaraha-maso: Hamarino tsindraindray ny fitaovana raha misy famantarana misy fahasimbana na fifandraisana mivaha. Raha misy olana hita, tapaho ny herinaratra ary manaova elektrisianina mahay.

Fanamboarana

Raha sendra olana amin'ny jironao ianao dia jereo ireto olana sy vahaolana mahazatra manaraka ireto:

fepetra arahana

Warranty sy fanohanana

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BLNAN website. Tehirizo ny tapakila fividiananao ho porofon'ny fividianana.