Roca A801E12001 Ona Collection Supralit Soft-Close Toilet Seat and Lid User Manual

Sava lalana

This manual provides detailed instructions for the installation, operation, and maintenance of your Roca A801E12001 Ona Collection Supralit Soft-Close Toilet Seat and Lid. Designed for durability and comfort, this toilet seat features a soft-close mechanism and is constructed from high-quality Supralit material with stainless steel hinges. Please read these instructions carefully before installation and use to ensure proper function and longevity of the product.

Sary 1: The Roca A801E12001 Supralit soft-close toilet seat and lid, showcasing its clean white finish and integrated hinges.

Torolàlana fametrahana

Before beginning installation, ensure you have all necessary components: the toilet seat and lid, and the soft-close hinges. This seat is compatible with Roca toilet bowls models A342687000, A347687000, and A346687000.

Fitaovana ilaina (tsy tafiditra):

• Screwdriver (appropriate for hinge fasteners)
• Measuring tape (for verifying dimensions)
• Lamba fanadiovana

Dingana fametrahana:

1. Omano ny vilia fidiovana: If replacing an old toilet seat, remove it completely. Clean the toilet bowl's mounting area thoroughly to ensure a secure and hygienic installation.
2. Position the Hinges: Place the soft-close hinges into the mounting holes on the toilet bowl. Ensure they are correctly aligned.
3. Secure the Hinges: From underneath the toilet bowl, attach the fasteners (usually wing nuts or bolts) to the hinge posts. Tighten them securely, but do not overtighten, as this can damage the toilet bowl or hinges.
4. Ampifandraiso ny Seza: Align the toilet seat and lid assembly with the secured hinges. The seat should click or slide onto the hinge posts. Ensure it is firmly attached.
5. Ahitsio Firindrana: Gently close the seat and lid to check for proper alignment with the toilet bowl. If necessary, loosen the hinge fasteners slightly, adjust the seat position, and then retighten.
6. Fitsapana ny fiasan'ny fanakatonana malefaka: Raise the seat and lid and gently push them down. They should lower slowly and silently due to the soft-close mechanism.

Sary 2: Technical drawing illustrating the dimensions of the Roca A801E12001 toilet seat (448mm length, 363mm width, 200mm hinge spacing), crucial for verifying compatibility with your toilet bowl.

Sary 3: The Roca A801E12001 toilet seat and lid shown installed on a compatible toilet bowl, demonstrating its integrated appearance.

hetsika

The Roca A801E12001 toilet seat features a soft-close mechanism for both the seat and the lid. This design ensures that the seat and lid close slowly and quietly, preventing slamming and reducing wear and tear. To operate, simply lift the seat or lid to the desired position. When lowering, a gentle push is sufficient; the soft-close mechanism will engage and guide the seat/lid down smoothly and silently.

Avoid forcing the seat or lid down, as this can damage the soft-close mechanism over time. Allow it to close naturally.

Fikarakarana sy fikojakojana

Proper care will ensure the longevity and appearance of your Roca toilet seat.

Cleaning the Supralit Seat and Lid:

• Use a soft cloth and mild, non-abrasive cleaning agents (e.g., soap and water).
• Avoid harsh chemicals, abrasive cleaners, scouring pads, or disinfectants containing chlorine or acids, as these can damage the Supralit surface.
• Rinse thoroughly with clean water after cleaning and dry with a soft cloth.

Cleaning the Stainless Steel Hinges:

• Fafao amin'ny dokaamp lamba sy savony malefaka.
• Dry immediately with a soft, dry cloth to prevent water spots and maintain shine.
• Do not use abrasive cleaners or steel wool on the hinges.

Fanamboarana

Ireto misy vahaolana amin'ny olana mahazatra mety hanjo anao:

• Seat is Loose:

  Check the hinge fasteners underneath the toilet bowl. Tighten them gently but firmly. Avoid overtightening.

• Soft-Close Mechanism Not Working Properly:

  Ensure the hinges are clean and free from debris. If the mechanism is stiff or not closing slowly, it might require adjustment or replacement. Contact Roca customer support if the issue persists after checking for obstructions.
• Seat Does Not Align with Bowl:

  Loosen the hinge fasteners slightly, adjust the seat position until it is centered on the bowl, then retighten the fasteners.

Product Specifications

Warranty Information

Specific warranty details for the Roca A801E12001 toilet seat are typically provided at the point of purchase or can be found on the official Roca website. Please retain your proof of purchase for any warranty claims. For detailed terms and conditions, refer to the warranty documentation included with your product or visit the official Roca website.

Fanohanana ny mpanjifa

For further assistance, technical support, or inquiries regarding your Roca A801E12001 toilet seat, please visit the official Roca website or contact their customer service department. Contact information can usually be found on the Roca webtoerana na eo amin'ny fonosana vokatra.

Official Roca Webtranokala: www.roca.com