Sava lalana
The TOA SR-S4S is a high-performance, two-way line array speaker system designed for short-distance sound transmission. Its unique design allows for precise sound projection and consistent audio levels across various distances. This manual provides essential information for the proper setup, operation, and maintenance of your SR-S4S speaker system.
Information momba ny fiarovana
Always observe the following safety precautions to prevent personal injury and damage to the equipment:
- Loharano herinaratra: Ensure the speaker is connected to a power source that matches its voltage fepetra.
- rivotra: Aza sakanana ny fidiran'ny rivotra. Ataovy izay hahazoana rivotra ampy tsara manodidina ny fitaovana mba hisorohana ny hafanana be loatra.
- Hamandoana: Keep the speaker away from water or excessive moisture. This product is not waterproof.
- Mametraka: When mounting, ensure the structure can support the speaker's weight (approximately 16 kg / 42.8 pounds). Use appropriate mounting hardware and follow all local building codes.
- Serivisy: Aza manandrana manompo an'ity vokatra ity ny tenanao. Ampidiro amin'ireo mpiasan'ny serivisy mahay ny fanompoana rehetra.
Vita ny vokatraview
The SR-S4S speaker system is engineered for optimal sound distribution, featuring a robust design and advanced acoustic components.
Sary: Front view of the TOA SR-S4S Short Throw 2-Way Line Array Speaker System. The speaker is a tall, slender, rectangular unit with a perforated metal grille covering the front face. The enclosure is light gray, and visible bolts secure the side panels. The TOA logo is subtly visible near the bottom of the grille.
Lafin-javatra fototra:
- Equipped with eight 10cm woofers for powerful low-frequency output.
- Features 24 small tweeters for clear high-frequency sound reproduction.
- Linear sound source effect minimizes energy attenuation over distance, enhancing long-distance sound projection.
- Suppressed vertical sound dispersion directs sound precisely to the target area.
- Maintains consistent sound pressure levels, preventing excessive loudness near the speaker.
- Allows for configuration of longer sound sources by joining 2 or 3 speakers, increasing projection distance and volume.
- Includes a built-in network circuit for single amplifier drive.
- Can be converted to a bi-amplifier drive system by modifying internal connections.
- Supports high-impedance applications with the optional MT-S0601 Matching Transformer.
Hametraka
Follow these steps for the initial setup of your SR-S4S speaker system:
- Famoahana: Carefully remove the speaker from its packaging. Inspect for any signs of damage during transit.
- Fametrahana: Position the speaker in the desired location. Ensure it is on a stable, level surface or securely mounted according to professional installation guidelines. Consider the speaker's directivity angle (90° Horizontal / 10° Vertical) for optimal sound coverage.
- Fifandraisana: Ampifandraiso amin'ny findainao ny mpandahateny amplifier using appropriate speaker cables. The SR-S4S features M5 screw terminals and Neutrik NL4MP x2 input connectors. Ensure correct polarity (+ to + and - to -).
- Option Bi-Amping: If using a bi-amplifier drive system, refer to the detailed wiring diagram in the advanced setup guide (not included in this manual) for internal connection changes.
- Optional Matching Transformer: For high-impedance applications, install the optional MT-S0601 Matching Transformer as per its instructions.
- Herim-batana: Rehefa voalamina tsara ny fifandraisana rehetra dia alefaso ny solosainao amplifier and audio source. Start with the volume at its lowest setting.
fandidiana
Operating the SR-S4S is straightforward once properly set up:
- Fanaraha-maso ny feo: Adjust the volume level using your amplifier's controls. Avoid setting the volume too high, which can cause distortion or damage to the speaker.
- Fanamafisana ny feo: For optimal sound quality, consider using a digital processor like the DP-0206 (optional) to fine-tune the frequency response.
- System Integration: The SR-S4S is designed to integrate seamlessly into various audio setups, from small venues to larger installations requiring precise sound projection.
fikarakarana
Regular maintenance ensures the longevity and performance of your SR-S4S speaker system:
- Fanadiovana: Use a soft, dry cloth to wipe down the exterior of the speaker. Do not use abrasive cleaners, solvents, or excessive moisture.
- Fanaraha-maso: Periodically check all cable connections for tightness and signs of wear. Ensure mounting hardware remains secure.
- fitahirizana: If storing the speaker for an extended period, keep it in a dry, temperature-controlled environment, ideally in its original packaging or a protective cover.
Fanamboarana
If you encounter issues with your SR-S4S speaker, refer to the following common problems and solutions:
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| Tsy misy feo mivoaka | Fifandraisana tariby tsy mety na diso Amptsy mandeha ny lifier Tsy mety ny fisafidianana fidirana ampLifer | Check all speaker and ampLifier fifandraisana. antoka ampMirehitra ny lifier ary miasa tsara. Verify correct input source is selected on ampLifer. |
| Feo diso | Habe loatra Damaged speaker cable Ampfametahana lifier | Ahena ny haavon'ny feo. Inspect speaker cables for damage; replace if necessary. Jereo amplifier's output level and ensure it's not overdriven. |
| Feo mifanelanelana | Fifandraisana malalaka Cable diso | Arovy ny fifandraisana rehetra. Try a different speaker cable to isolate the issue. |
If the problem persists after attempting these solutions, contact TOA customer support or a qualified service technician.
fepetra arahana
| endri-javatra | antsipirihany |
|---|---|
| Karazam-baravarana | Bass-reflex karazana |
| Fahaizana mitantana hery | Continuous program 600W |
| Impedance naoty | 8Ω |
| Fahatsapana (1W, 1m) | 93dB |
| Famaliana matetika | 70-20000Hz (when using DP-0206 (option)) |
| Frequence Crossover | 3500Hz |
| Directivity Angle | Marindrano: 90°, mitsangana: 10° |
| Low Frequency Component | 10cm cone-type x8 |
| High Frequency Component | 2.5cm balanced dome-type x24 |
| Fampidirana mpampitohy | M5 screw terminal, distance between barriers: 12.2mm and Neutrik NL4MP x2 |
| refy (W x H x D) | 160 x 892 x 303mm (6.3 x 35.1 x 11.9 santimetatra) |
| lanja | 16 kg (35.3 lbs) / Item Weight: 42.8 pounds (from product data) |
| Laharana modely | SR-S4S |
Warranty sy fanohanana
For warranty information, please refer to the warranty card included with your product or visit the official TOA website. For technical support, replacement parts, or service inquiries, please contact TOA customer service through their official channels. Provide your product model number (SR-S4S) and serial number when contacting support.
TOA Electronics
Manufacturer of the SR-S4S Line Array Speaker System.
