VONROC 1500W 216mm Electric Sliding Miter Saw Instruction Manual

1. Torolàlana momba ny fiarovana

Always observe basic safety precautions when using this electric sliding miter saw to reduce the risk of fire, electric shock, and serious personal injury. Read all instructions carefully before operation.

Fiarovana amin'ny herinaratra amin'ny ankapobeny

• Fiarovana ny faritra fiasana: Ataovy madio sy mazava tsara ny toeram-piasana. Ny faritra mikorontana na maizina dia miteraka loza. Aza mampiasa fitaovam-pamokarana amin'ny atmosfera mipoaka, toy ny fisian'ny ranon-javatra mirehitra, entona, na vovoka.
• Fiarovana herinaratra: Tsy maintsy mitovy amin'ny fantson-jiro ny plug-n'ny fitaovana elektrika. Aza manova mihitsy ny plug. Aza avela hikasika ny vatana amin'ny tany na zavatra miraikitra amin'ny tany toy ny fantsona, radiator, fatana fandoroana ary vata fampangatsiahana.
• Fiarovana manokana: Always wear eye protection (safety goggles) and hearing protection. Use a dust mask if operations create dust. Dress properly; avoid loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.

Miter Saw Specific Safety

• Blade fiarovana: Ensure the blade is sharp and correctly installed. Never attempt to cut freehand. Always use the material clamp and fence to secure the workpiece.
• Torolalana amin'ny Laser: Do not stare directly into the laser beam. The laser is a Class 2 laser product.
• Fanangonana vovoka: Connect a dust extraction device or use the provided dust bag to minimize dust exposure.
• Fiatombohana: The saw features a soft start system. Allow the blade to reach full speed before beginning a cut.

2. Vokatra mihoatraview

The VONROC 1500W 216mm Electric Sliding Miter Saw is designed for precise cutting of wood, laminate, and similar materials. It features a powerful motor, a sliding function for wider cuts, and a laser guide for accuracy.

Ireo singa fototra

• Saw Head with Motor and Blade
• Sliding Rails
• Base Plate / Turntable
• Miter Scale and Lock Handle
• Bevel Adjustment and Lock
• Fitaovana Clamp
• Tabilao fanitarana
• Dust Port and Dust Bag
• Laser Guide

Sary 1: Feno view of the VONROC 1500W 216mm Electric Sliding Miter Saw.

3. Fametrahana

Famoahana sy Fivoriambe

1. Esory tsara ny singa rehetra amin'ny fonosana.
2. Inspect the saw for any damage that may have occurred during transit. Do not operate if damaged.
3. Attach the dust bag to the dust port at the rear of the saw head.
4. Install the extension tables on both sides of the base plate, securing them with the provided fasteners.

Fametrahana ny Saw

For stable operation, it is recommended to mount the miter saw to a workbench or a dedicated miter saw stand. Use the mounting holes in the base of the saw and appropriate hardware (not included) to secure it firmly.

Fanitsiana ny fefy

The fence provides support for the workpiece. Ensure it is properly aligned and secured before making any cuts. The fence can be adjusted for different cutting angles and material thicknesses.

Figure 2: The sliding mechanism and adjustable fence provide support and allow for wider cuts.

Laser Guide Alignment

The laser guide projects a line onto the workpiece, indicating the cutting path. To activate, press the laser button. If the laser line is not aligned with the blade's kerf, consult the troubleshooting section for adjustment instructions.

Figure 3: The integrated laser guide assists in precise cutting by projecting a visible line.

4. Fampandehanana

Fomba fanapahana fototra

1. Fitaovana azo antoka: Place the workpiece firmly against the fence and base. Use the material clamp to hold it securely.
2. Set zoro: Adjust the miter angle by loosening the lock handle, rotating the turntable to the desired angle (e.g., 0°, 15°, 22.5°, 30°, 45°), and then tightening the lock handle.
3. Set Bevel: For bevel cuts, loosen the bevel lock, tilt the saw head to the desired angle (e.g., 0° to 45°), and tighten the lock.
4. Tsofa fanombohana: Press the trigger switch. Allow the blade to reach full speed before lowering it into the workpiece.
5. Manapaha: Slowly lower the saw head through the workpiece. For sliding cuts, pull the saw head towards you, lower it, and push it smoothly through the material.
6. Release Saw: Rehefa vita ny fanapahana dia avoahy ny bokotra ary avelao hijanona tanteraka ny lelany alohan'ny hananganana ny lohan'ny tsofa.

Figure 4: The turntable allows for precise miter angle adjustments from -45° to +45°.

Figure 5: The saw head can be tilted for accurate bevel cuts up to 45°.

Sliding Function

The sliding function allows for cutting wider workpieces than a standard miter saw. To use, unlock the sliding mechanism (if applicable), pull the saw head forward, lower the blade into the material, and push the saw head smoothly back through the workpiece. Ensure the workpiece is fully supported throughout the cut.

5. Fikojakojana

Regular maintenance ensures the longevity and safe operation of your miter saw. Always disconnect the saw from the power supply before performing any maintenance.

Fanovana Blade

1. Esory ny fahefana.
2. Atsangano ny mpiaro ny lelany.
3. Ampiasao ny fanerena nomena mba hamahana ny voanjo arbor raha mihazona ny bokotra hidin-trano.
4. Carefully remove the old blade and install the new blade, ensuring the teeth are oriented correctly.
5. Henjano tsara ny voanjo arbor.

FANADIOVANA

• Regularly empty the dust bag or vacuum the dust port.
• Clean the saw's exterior with a damp lamba. Aza mampiasa akora simika mahery vaika.
• Keep the sliding rails clean and free of debris for smooth operation.

fanosorana

Apply a thin layer of light machine oil to the sliding rails periodically to ensure smooth movement of the saw head.

6. Famahana olana

7. Famaritana

8. Warranty sy fanohanana

VONROC products are manufactured to high-quality standards. For warranty information, please refer to the documentation included with your purchase or visit the official VONROC website. For technical support, spare parts, or service inquiries, please contact VONROC customer service through their official channels.

Azafady, tehirizo ny porofon'ny fividiananao raha misy fitakiana fiantohana.