Vita ny vokatraview
The VECTOR SS6LV is a compact and powerful 1200 peak amp lithium jump starter designed to instantly start cars and trucks with up to 8-cylinder engines. Beyond its primary function, it serves as a versatile portable power bank, featuring USB-A (2.1 Amps) and USB-C (3.1 Amps) ports for charging various electronic devices. It also includes an integrated LED work light for convenience in low-light conditions. The unit is equipped with a Smart Controller for safe operation, providing reverse polarity protection, and comes with heavy-duty powder-coated clamps.
Image: The VECTOR SS6LV jump starter with its attached heavy-duty clamps, asehocasing ny endriny mirindra.
Inona no ao anaty boaty
Rehefa manokatra ny fonosana ianao dia hahita ireto singa manaraka ireto:
- VECTOR SS6LV Lithium Jump Starter Unit
- Smart Controller with Heavy Duty Powder Coated Clamps
- AC Charging Adapter
- DC (Car) Charging Adapter
- USB Charging Cable
Image: All components included in the VECTOR SS6LV product box.
Endriky ny vokatra
- Mpanomboka mitsambikina: Delivers 1200 peak amps, capable of jump starting vehicles with up to 8-cylinder engines.
- USB Charger: Equipped with USB-A (2.1 Amps) and USB-C (3.1 Amps) ports to charge and power various electronic devices such as phones, tablets, and laptops.
- Batterie Lithium Rechargeable: Internal lithium-ion battery can be recharged using the included AC, DC, or USB adapters.
- Fiasa azo antoka: Features an Engine Start Smart Controller with reverse polarity protection, ensuring correct and safe connection of jumper cables.
- Famolavolana portable: Compact and lightweight, making it easy to store and transport for on-the-go power needs.
- Jiro miasa LED: Integrated bright LED light provides illumination for nighttime or low-light situations.
Sary: Detailed view of the VECTOR SS6LV unit with key features labeled.
Hametraka
Fametrahana voalohany
Before first use, fully charge the VECTOR SS6LV unit. It is recommended to fully charge the unit every 3 to 6 months to maintain optimal battery health, even if not in use.
- Connect the USB Charging Cable to the unit's USB-C port.
- Connect the other end of the USB Charging Cable to either the AC Charging Adapter (for wall outlet) or the DC Charging Adapter (for vehicle 12V accessory outlet).
- Plug the chosen adapter into its respective power source. The battery indicator lights on the unit will illuminate to show charging progress.
- Charging is complete when all indicator lights are solid blue.
Connecting for Jump Start
Ensure the vehicle's ignition is off before connecting the jump starter.
- Locate the battery terminals in your vehicle. The positive terminal is usually marked with a "+" sign and covered by a red cap. The negative terminal is marked with a "-" sign.
- Ampifandraiso ny mena (positif) clamp of the Smart Controller to the positive (+) terminal of the vehicle's battery.
- Ampifandraiso ny mainty (ratsy) clamp of the Smart Controller to a clean, unpainted metal part of the vehicle's chassis or engine block, away from the battery and moving parts. Alternatively, connect to the negative (-) terminal of the battery if safe to do so.
- Plug the Smart Controller cable into the "ENGINE START" port on the VECTOR SS6LV unit. The Smart Controller will indicate readiness (e.g., a solid green light).
Image: The jump starter connected to a vehicle battery, ready for use.
fandidiana
Mitsambikina manomboka fiara
- Ensure the VECTOR SS6LV unit is fully charged and properly connected to the vehicle's battery as described in the "Setup" section.
- Once the Smart Controller indicates readiness (e.g., solid green light), attempt to start the vehicle's engine. Do not crank for more than 5 seconds.
- If the vehicle does not start, wait at least 30 seconds before attempting again. Do not exceed three consecutive jump start attempts.
- Once the vehicle starts, immediately disconnect the Smart Controller from the VECTOR SS6LV unit, then disconnect the black (negative) clamp, followed by the red (positive) clamp avy amin'ny bateria fiara.
Mampiasa toy ny Power Bank
The VECTOR SS6LV can charge various electronic devices.
- Connect your device's USB charging cable to either the USB-A (2.1 Amps) or USB-C (3.1 Amps) port on the side of the VECTOR SS6LV unit.
- Press the power button on the unit to begin charging. The indicator lights will show the remaining battery level.
Image: The jump starter unit actively charging a smartphone.
Mampiasa ny LED Work Light
The integrated LED work light provides illumination for various tasks.
- To turn on the LED work light, press and hold the power button for approximately 3 seconds.
- To cycle through light modes (solid, strobe, SOS), briefly press the power button.
- To turn off the LED work light, press and hold the power button again for approximately 3 seconds.
Image: The bright LED work light on the end of the unit.
fikarakarana
Famerenana ny Unit
To ensure the longevity and readiness of your VECTOR SS6LV, it is crucial to maintain its charge. Recharge the unit after each use, and at least every 3 to 6 months, even if it has not been used. This prevents deep discharge and prolongs battery life.
fitahirizana
Store the unit in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it out of reach of children. Ensure the rubber covers for the ports are securely closed to protect against dust and moisture.
Fanamboarana
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| Tsy mandeha ny unit. | Tapaka tanteraka ny bateria. | Recharge the unit using the provided AC or DC adapters. |
| Tsy mitsambikina ny fiara. | Diso clamp connection; vehicle battery is severely damaged; vehicle engine is too large for the unit's capacity. | Ataovy azo antoka clamps are connected correctly (red to positive, black to chassis/negative). Check Smart Controller indicator. Consult a mechanic if battery is damaged. Confirm vehicle engine size is within the unit's specifications (up to 8-cylinders). |
| Smart Controller shows error. | Fifandraisana polarité mivadika; circuit court; hafanana tafahoatra. | Tapaho ny fifandraisana clamps and re-connect correctly. Ensure clamps do not touch each other. Allow unit to cool down if it has been used extensively. |
| Ireo fitaovana tsy afaka mamandrika amin'ny alalan'ny USB. | Unit is off; USB cable is faulty; device is not compatible. | Press the power button to activate USB output. Try a different USB cable. Ensure your device is compatible with standard USB charging. |
fepetra arahana
- marika: VECTOR
- Laharana modely: SS6LV
- Haben'ny vokatra: 3" D x 1" W x 7" H
- Lanja entana: 13.8 oz
- Ampfandravana: 1200 Amps
- Peak Output Current: 1200 Amps
- Karazana bateria: Lithium Ion (1 ilaina, tafiditra)
- USB-A Output: 2.1 Amps
- USB-C Output: 3.1 Amps
- Mpanamboatra: Baccus Global LLC
- Firenena nihaviana: CHINE
Information momba ny fiarovana
FAMPITANDREMANA: Ity vokatra ity dia mety hampiharihary anao amin'ny zavatra simika ao anatin'izany ny firaka sy ny firaka, izay fantatry ny State of California hiteraka homamiadan'ny aretina sy fahaterahana na fahavoazana hafa amin'ny fiterahana. Raha mila fanazavana fanampiny dia mankanesa any www.p65Warnings.ca.gov.
Always refer to the full user manual for complete safety instructions and warnings before operating this device.
Lahatsary vokatra ofisialy
Watch this official video from VECTOR to understand the key differences between battery chargers and jump starters, and how the VECTOR SS6LV functions.
Video: "VECTOR - Charger vs Jumper" - This video explains the distinction between battery chargers and jump starters, highlighting the immediate boost provided by a jump starter like the SS6LV.
