Sava lalana
This manual provides essential information for the setup, operation, and maintenance of your FOX 32 STEP CAST PERFORMANCE 100 15QRx110mm 1.5T mountain bike fork. Designed for cross-country performance, this fork features a lightweight Step-Cast chassis, a redesigned crown for increased stiffness, and advanced damping technology to enhance your riding experience.
The FOX 32 Step-Cast Performance fork is engineered to meet the demands of competitive cross-country riding, offering a balance of low weight and robust performance. Its unique Step-Cast chassis design optimizes weight savings while providing clearance for spokes and brake rotors. Key features include black anodized upper tubes, 32mm stanchions, a FIT GRIP damper, and a FLOAT air spring.
Vita ny vokatraview
Sary 1: Eo anoloana view of the FOX 32 Step-Cast Performance fork, showcasing its matte black finish and distinct Step-Cast lower leg design.
Sary 2: Angled view of the fork, illustrating the unique Step-Cast chassis which reduces weight and provides clearance for bike components.
Sary 3: Side profile of the fork, showing the full length and the black anodized upper tubes.
Figure 4: Detail of the blue top caps, indicating the FLOAT Air spring on the left and the GRIP damper with Open/Firm settings on the right.
Sary 5: View of the lower leg, showing the red rebound adjuster knob and the 15QRx110mm axle system.
Sary 6: antsipirihany view of the "32 STEP-CAST PERFORMANCE" graphics on the fork's lower leg.
Hametraka
Proper setup is crucial for optimal performance and safety. Always refer to the detailed instructions on the official FOX website for the most accurate and up-to-date setup guides, including air pressure settings and damper adjustments based on rider weight and riding style.
Fametrahana voalohany
- Steerer Tube Preparation: The fork comes with a 264mm tapered steerer tube. Cut the steerer tube to the appropriate length for your bicycle frame and stem combination. Ensure proper headset installation.
- Wheel Compatibility: This fork is designed for 27.5-inch wheels and features a 15QRx110mm Boost axle spacing. Ensure your wheel is compatible.
- Brake Compatibility: The fork is compatible with disc brakes. Install your brake caliper according to the brake manufacturer's instructions.
Air Spring Setup (FLOAT Air Spring)
The FLOAT air spring allows for precise tuning of the fork's firmness. Use a high-pressure shock pump to adjust the air pressure in the main air chamber. Consult the FOX website or the sticker on the fork leg for recommended air pressure settings based on your weight and riding preferences. Always cycle the fork through its travel several times after adding or releasing air to equalize pressures.
Sag Setting
Sag is the amount the suspension compresses under the rider's weight. Setting sag correctly is fundamental for proper suspension performance. Typically, for cross-country forks, sag is set between 15-20% of the total travel (100mm for this model). Refer to FOX's official guides for detailed sag measurement procedures.
Fanitsiana miasa
FIT GRIP Damper
The FIT GRIP damper provides on-the-fly compression adjustments. The blue lever on the top right of the fork crown allows you to switch between "Open" and "Firm" modes:
- Fomba misokatra: Provides full suspension travel and maximum small bump compliance, ideal for technical descents and rough terrain.
- Firm Mode: Increases compression damping for a firmer ride, reducing suspension movement during climbing or on smooth terrain.
Fanitsiana miverina
The red knob located at the bottom of the right fork leg controls the rebound damping. Rebound damping controls how quickly the fork extends after compression. Turning the knob clockwise (towards "Slow") slows down the rebound, while turning it counter-clockwise (towards "Fast") speeds it up. Adjust this setting to prevent the fork from packing up on successive bumps or feeling too bouncy.
fikarakarana
Regular maintenance ensures the longevity and optimal performance of your FOX fork. Always consult the official FOX service intervals and guides for detailed procedures.
Fanadiovana mahazatra
- After every ride, wipe down the stanchions (upper tubes) with a clean, soft cloth to remove dirt and debris.
- Clean the entire fork with mild soap and water. Avoid high-pressure washers directly on seals.
- Inspect the fork for any signs of damage, leaks, or unusual wear.
Air Pressure Check
Check your air spring pressure before every ride using a high-pressure shock pump. Air pressure can fluctuate with temperature changes and over time.
Service Intervals
FOX recommends regular service for their suspension products. This typically includes lower leg service (dust wiper and foam ring replacement, oil change) and a full damper/air spring service at specified intervals. Refer to the FOX website for the most current service schedules and authorized service centers.
Fanamboarana
This section addresses common issues you might encounter with your FOX 32 Step-Cast Performance fork. For complex issues or if you are unsure, contact an authorized FOX service center.
Fahaverezan'ny tsindrin'ny rivotra
- Famantarana: Fork feels soft, bottoms out easily, or loses travel.
- Antony mety hitranga: Low air pressure, leaky air valve, or internal air seal issue.
- Vahaolana: Check air pressure and reinflate. Ensure valve cap is tight. If pressure loss persists, it may indicate an internal seal problem requiring professional service.
Poor Damping Performance
- Famantarana: Fork feels too bouncy (fast rebound) or packs up (slow rebound), or lacks compression support.
- Antony mety hitranga: Incorrect rebound/compression settings, low damper oil level, or contaminated damper oil.
- Vahaolana: Adjust rebound and compression settings. If issues persist, the damper may require service by an authorized technician.
Unusual Noises (Creaking, Clunking)
- Famantarana: Audible creaking or clunking sounds during fork compression or extension.
- Antony mety hitranga: Loose headset, loose axle, dry bushings, or internal component wear.
- Vahaolana: Check headset tightness and axle security. If noises continue, professional inspection is recommended.
fepetra arahana
| endri-javatra | famaritana |
|---|---|
| MODELY | FOX 32 STEP CAST PERFORMANCE |
| Laharan'ny ampahany | 910-20-231 |
| Tsangatsangana | 100 mm |
| Haben'ny kodia | 27.5 santimetatra |
| Karazana axle | 15QRx110mm (Boost) |
| Steerer Type | Tapered |
| Steerer Tube Length | 264 mm |
| S.H.I.S. Stem Clamp savaivony | 28.6 mm |
| Stanchion Diameter | 32 mm |
| Offset | 44 mm |
| Axle to Crown Length | 488 mm |
| Karazana lohataona | FLOAT Air (Positive and Negative) |
| Damper Type | FIT GRIP |
| loko | Matte Black |
| Lanja entana | 3.5 kg |
| mpanamboatra | Fox Shox |
| Taona modely | 2021 |
Warranty sy fanohanana
For detailed warranty information, please refer to the official FOX webtranonkala na ny karatra fiantohana miaraka amin'ny vokatrao. Mety miovaova arakaraka ny faritra sy ny vokatra ny fepetra sy ny fepetra momba ny fiantohana.
For technical support, service, or to find an authorized service center, please visit the official FOX webtranokala:
Always use genuine FOX replacement parts and have service performed by qualified technicians to maintain product integrity and warranty validity.
