1. Vokatra mihoatraview
The Hifonics BG-4000.1D Brutus Gamma Monoblock Amplifier is a Super D Class car audio amplifier designed to deliver powerful sound to subwoofers. It features a robust aluminum construction for efficient cooling and minimal distortion, along with advanced control capabilities for precise audio tuning.
Sary 1: Eo anoloana view of the Hifonics BG-4000.1D Brutus Gamma Monoblock Amplifier, fampisehoanacasing its sleek design and Hifonics branding.
izany amplifier is engineered for high performance, providing up to 4000 watts at 1 ohm, 2200 watts at 2 ohms, and 1100 watts at 4 ohms. It includes a wired bass remote for convenient control and features Ultra-Fi MOSFET output device technology for powerful and clear sound reproduction.
2. Information momba ny fiarovana
WARNING: Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to the product or vehicle.
- Esory foana ny bateria-n'ny fiara alohan'ny hanaovana asa elektrika.
- Hamarino tsara ny fototra iorenan'ny ampfitaovana fanamafisam-peo ho an'ny chassis-n'ny fiara.
- Use appropriate gauge wiring for power, ground, and speaker connections to prevent overheating and damage.
- Install ny amplifier in a well-ventilated area to prevent overheating. Avoid mounting in enclosed spaces without adequate airflow.
- Arovy amin'ny sisiny maranitra sy ny faritra mihetsika ny tariby rehetra.
- Aza sarona ny ampLifier amin'ny hamandoana na hafanana tafahoatra.
- Seek professional installation if you are unsure about any part of the setup process.
3. Fametrahana sy fametrahana
3.1 Fametrahana ny AmpLifer
Select a mounting location that provides adequate ventilation and is protected from moisture. The amplifier's aluminum heat sink is designed for efficient cooling, but proper airflow is still essential. Secure the amplifier firmly to a solid surface using appropriate hardware.
Sary 2: lafiny view ny amplifier, illustrating its compact dimensions (L) 21.94" x (W) 11.81" x (H) 4.06" and built-in bass control.
3.2 Fifandraisana tariby
All connections should be made with the vehicle's battery disconnected. Use high-quality, appropriate gauge wiring for all connections.
Image 3: Rear panel of the amplifier showing power, ground, remote, and speaker output terminals. Note the illuminated power and protect indicators.
Fifandraisana hery sy tany:
- +12V (Hery): Connect to the positive terminal of the vehicle's battery via an appropriate fuse or circuit breaker (not included).
- GND (tany): Connect to a clean, unpainted metal surface of the vehicle chassis. Ensure a solid, low-resistance connection.
- REM (lavitra): Ampifandraiso amin'ny output alefa lavitra an'ny head unit-nao.
Sary 4: akaiky view of the secure molded connection terminals for power, ground, remote, and speaker outputs, designed for high-temperature and impact resistance.
Fifandraisana Output Speaker:
- Connect your subwoofer(s) to the "MONO OUTPUT" terminals. Ensure correct polarity (+ to + and - to -).
- ny amplifier supports mono operation and is stable down to 1 ohm.
RCA Input Connections:
- Connect the RCA input cables from your head unit's subwoofer output to the amplifier's "INPUT" RCA jacks.
Image 5: Close-up of the amplifier's control panel, including RCA inputs, gain, low-pass filter, subsonic filter, phase, and bass boost adjustments.
3.3 Fampivoarana voalohany
After all connections are secure, reconnect the vehicle's battery. The power indicator LED on the amplifier's end panel should illuminate, indicating proper operation. If the protect LED illuminates, refer to the troubleshooting section.
4. Torolàlana miasa
4.1 Fanitsiana ny fanaraha-maso
The BG-4000.1D amplifier features several adjustable controls to fine-tune your audio output:
- MAMPIASA: Adjusts the input sensitivity to match the output of your head unit. Start with the gain at minimum and slowly increase until desired volume is achieved without distortion.
- LPF (Sivana Ambany): Controls the upper frequency limit for the subwoofer. Typically set between 40Hz and 180Hz to ensure only low frequencies are sent to the subwoofer.
- SUBSONIC: Filters out extremely low frequencies that are inaudible and can damage subwoofers. Typically set between 10Hz and 40Hz.
- FASA: Adjusts the phase of the subwoofer output (0° or 180°) to optimize bass response with other speakers in the vehicle.
- BASS BOOST: Provides an adjustable bass enhancement (0dB to 12dB) at a specific frequency. Use sparingly to avoid distortion.
4.2 Wired Bass Remote
The included wired bass remote allows for convenient adjustment of the subwoofer output level from the driver's seat. Connect the remote to the dedicated port on the ampny tontonana fanaraha-maso an'ny lifier.
4.3 LED famantarana
- PWR (Hery) LED: Illuminates green when the ampmandeha sy miasa ara-dalàna ny lifier.
- PRT (Protect) LED: Mamirapiratra mena rehefa ny amplifier detects a fault (e.g., overheating, short circuit, low voltage). If this LED lights up, turn off the audio system and investigate the cause.
For optimal performance, refer to the detailed instructions in the full product manual for specific settings and tuning recommendations.
5. Fikojakojana
- Fanadiovana: Mampiasà lamba malefaka sy maina hanadiovana ny ampny ivelany amin'ny fitaovana fanadiovana. Aza mampiasa akora simika mahery vaika na mpanadio mikikisana.
- rivotra: Hamarino tsy tapaka fa ny amplifier's heat sink fins are free from dust and debris to ensure proper cooling.
- Fifandraisana: Ensure all power, ground, and speaker connections remain tight and free from corrosion.
6. Famahana olana
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| No Power (Power LED off) | Fuse nipoaka, tariby herinaratra/tariby mifandray amin'ny tany/tariby fanaraha-maso lavitra tsy mandeha tsara, tsy misy famantarana avy lavitra. | Check fuse, verify all connections are secure, ensure head unit is sending a remote signal. |
| Protect LED is on | Overheating, short circuit in speaker wiring, low impedance load. | Avelao amplifier to cool, check speaker wiring for shorts, verify speaker impedance is within amplifier's limits. |
| Tsy misy feo mivoaka | Loose RCA cables, incorrect gain setting, speaker wires disconnected. | Check RCA connections, adjust gain, verify speaker wire connections. |
| Feo diso | Gain set too high, improper LPF/Subsonic settings, poor quality audio source. | Reduce gain, adjust LPF/Subsonic filters, use a higher quality audio source. |
7. Famaritana
| endri-javatra | antsipirihany |
|---|---|
| MODELY | BG-4000.1D |
| Marika | Hifonika |
| AmpLifier Class | Super D Class |
| Isan'ny fantsona | 1 (Monobloc) |
| Hery famoahana (1 Ohm) | 1 channel x 4,000 watts |
| Output Power (2 Ohms) | 1 channel x 2,200 watts |
| Output Power (4 Ohms) | 1 channel x 1,100 watts |
| BOKYtage | 12 Volts (DC) |
| Famatsiana ambony indrindra Voltage | 12 Volts (DC) |
| Karazana fametrahana | Car Mount |
| KEVITRA | VIRATY |
| Lanja entana | 13.52 kg |
| Endri-javatra manokana | Wired Bass Remote, Variable Electronic Crossover, Electronic Equalizer, Ultra-Fi MOSFET Output Technology, Overload & Speaker Short Protection |
7.1 Vidin'ny vokatra
Video 1: Official Hifonics video showcasing the Brutus Gamma BG Amplifier series, highlighting its features and design.
8. Warranty & Fanohanana
8.1 Fampahalalana momba ny fiantohana
This Hifonics product is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms, conditions, and duration. Keep your proof of purchase for warranty claims.
8.2 Fanohanana ny mpanjifa
For technical assistance, troubleshooting, or warranty inquiries, please contact Hifonics customer support. Visit the official Hifonics webtranokala ho an'ny fampahalalana momba ny fifandraisana sy loharano fanohanana farany indrindra.