PowerWalker VFI 3000 AT UPS User Manual

Sava lalana

The PowerWalker VFI AT series is an online Uninterruptible Power Supply (UPS) system designed to provide reliable power protection for critical electronic devices. This manual provides essential information for the safe and efficient operation of your PowerWalker VFI 3000 AT UPS, model 10122182.

Torolàlana manan-danja momba ny fiarovana

Please read and follow all instructions carefully before installing, operating, or servicing the UPS. Keep this manual for future reference.

• This UPS contains hazardous voltagAza manandrana manasaraka ny fitaovana. Ny mpiasa mahafeno fepetra ihany no tokony hanao ny fanamboarana.
• Ny UPS dia tsy maintsy ampifandraisina amin'ny fantsom-pamokarana herinaratra AC misy tany.
• Do not block ventilation openings. Ensure adequate airflow around the UPS.
• Aza apetraka amin'ny tara-masoandro mivantana, akaikin'ny loharanon-kafanana, na amin'ny tontolo misy vovoka be loatra, hamandoana be loatra, na zavatra manimba.
• The internal batteries are not user-replaceable. Contact qualified service personnel for battery replacement.
• In case of fire, use a dry chemical fire extinguisher. Water can be dangerous.

Fonosana fonosana

Verify that all items listed below are included in your package. If any items are missing or damaged, contact your dealer.

• PowerWalker VFI 3000 AT UPS Unit
• User Manual (ity antontan-taratasy ity)
• Cable Fifandraisana USB
• Power Input Cable
• CD rindrambaiko (raha ilaina)

Vita ny vokatraview

Front Panel

Sary 1: anoloana view of the PowerWalker VFI 3000 AT UPS. This image displays the main chassis, ventilation grilles, and the front control panel with its LCD screen and buttons.

Sary 2: antsipiriany view of the UPS front panel. The LCD screen shows input/output voltage and load status. Below the screen are control buttons: ON, OFF, ENTER, and ESC, used for navigating menus and controlling the unit.

The front panel features an LCD display that provides real-time information about the UPS status, including input/output voltage, battery level, and load capacity. Control buttons allow for navigation through the display menus and basic operation of the unit.

Rear Panel

Sary 3: aoriana view of the PowerWalker VFI 3000 AT UPS. This panel includes multiple Type F earthing contact outlets for connecting protected devices, cooling fans, a main power input, and communication ports (USB, RS-232, and an optional slot for network card).

The rear panel provides the necessary connections for input power, output to protected devices, and communication interfaces. It includes four Type F earthing contact outlets, a terminal output, USB and RS-232 communication ports, and slots for optional accessories like network cards.

Torolàlana fametrahana

1. Fametrahana

• Apetraho eo amin'ny toerana fisaka sy mafy orina ny UPS.
• Ensure the environment is well-ventilated and free from excessive dust or moisture.
• Maintain at least 20 cm (8 inches) of clearance from the rear and sides of the UPS for proper airflow.
• Avoid placing the UPS near heat-emitting appliances.

2. Mifandray amin'ny Power

1. Connect the provided power input cable to the UPS input receptacle on the rear panel.
2. Plug the other end of the power input cable into a grounded wall outlet.
3. Allow the UPS to charge for at least 8 hours before initial use to ensure optimal battery performance.

3. Fitaovana mampifandray

1. Plug your critical devices (e.g., computers, servers, network equipment) into the Type F output receptacles on the rear panel of the UPS.
2. Ensure that the total load connected to the UPS does not exceed its rated capacity (2700W for this model).
3. For devices requiring terminal output, connect them according to electrical safety standards.

4. Startup voalohany

1. After connecting the UPS to AC power and allowing initial charging, press and hold the ON button on the front panel for approximately 2 seconds.
2. The UPS will perform a self-test, and the LCD display will illuminate, indicating operational status.
3. The UPS is now providing protected power to the connected devices.

Fampandehanana ny UPS

Mandeha / miala

• Hamelona: Tsindrio ary hazòny ny ON bokotra mandritra ny 2 segondra.
• Famonoana: Tsindrio ary hazòny ny NIALA button for 2 seconds. The UPS will shut down, and power to connected devices will cease.

Fahatakarana ny LCD Display

The LCD display provides critical information about the UPS status. Use the Ampidiro SY ESC buttons to navigate through different display screens, which may include:

• Fampidirana Voltage sy Frequency
• Output Voltage sy Frequency
• Ambaratonga fiampangana bateria
• Load Percentage
• Operating Mode (Online, Battery, Bypass)
• Error Codes (if any)

Famerenana ny bateria

Raha sendra misy fahefana outage na vol manan-danjatage fluctuation, the UPS will automatically switch to battery power to provide continuous power to connected devices. An audible alarm may sound, and the LCD will indicate "Battery Mode." The duration of battery backup depends on the load connected and the battery charge level.

Communication Software

For advanced monitoring and management, install the provided communication software on a computer connected to the UPS via the USB or RS-232 port. This software allows for scheduled shutdowns, remote monitoring, and detailed event logging.

fikarakarana

Fikarakarana bateria

• Ensure the UPS is connected to AC power at all times to keep the batteries fully charged.
• Perform a battery self-test periodically (e.g., once every 3 months) using the UPS front panel controls or communication software to verify battery health.
• Batteries have a limited lifespan. If the battery backup time significantly decreases, contact qualified service personnel for replacement.

FANADIOVANA

• Esory amin'ny herinaratra AC sy ireo fitaovana rehetra mifandray aminy ny UPS alohan'ny hanadiovana azy.
• Use a soft, dry cloth to wipe the exterior of the UPS.
• Do not use liquid or aerosol cleaners, as they may damage the unit.
• Periodically clean the ventilation grilles to prevent dust buildup, which can impede airflow and cause overheating.

fitahirizana

• If storing the UPS for an extended period, ensure the batteries are fully charged.
• Store the UPS in a cool, dry place.
• Recharge the batteries every 3 months during storage to prevent deep discharge and prolong battery life.

Fanamboarana

Refer to the table below for common issues and their solutions. If the problem persists, contact technical support.

fepetra arahana

Warranty sy fanohanana

The PowerWalker VFI 3000 AT UPS is covered by a manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official PowerWalker website.

For technical support, service inquiries, or to report any issues, please contact your local dealer or PowerWalker customer service. Have your model number (10122182) and purchase information ready when contacting support.