HOMCOM Velvet Office Chair with Massage Lumbar Support - Model 921-298PK Instruction Manual

Sava lalana

Misaotra anao nividyasing the HOMCOM Velvet Office Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before use and retain them for future reference.

Image: The HOMCOM Velvet Office Chair, showcasing ny endriny sy ny lokony.

Torolàlana fiarovana

To ensure safe operation and prevent injury, please observe the following safety guidelines:

• Lanja ambony indrindra: Do not exceed the recommended maximum weight of 115 kg (253 lbs).
• Fivoriambe: Ensure the chair is correctly assembled according to the instructions before use. Do not use if any parts are damaged or improperly installed.
• Tontolo iainana: Keep the area around the chair clean and free from obstacles to prevent injury.
• fahamarinan-toerana: Avoid leaning excessively or using the chair in an unstable manner.
• Ankizy: Keep children away from the chair during assembly and ensure they do not play with the chair unsupervised.

Fonosana fonosana

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer service.

• Chair Backrest (integrated with seat and armrests)
• Gasy Lift Cylinder
• Star Base
• Mpilalao kodiarana (5x)
• Mounting Hardware (screws, washers, Allen key - typically included)
• Lumbar Massage Cushion with USB Cable

Torolàlana momba ny fivoriambe

Follow these steps to assemble your HOMCOM Office Chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage.

1. Ampifandraiso amin'ny fototra ny Casters: Ampidiro ao anatin'ireo lavaka eo amin'ny faran'ny tongotra tsirairay amin'ny fotony kintana ireo kodiarana dimy. Tsindrio mafy mandra-pikitsoka tsara eo amin'ny toerany.
2. Ampidiro entona fanamafisam-peo: Apetraho eo amin'ny lavaka afovoan'ny fototry ny kintana ny cylinder entona.
3. Ampifandraiso amin'ny "Gaz Ascent" ny seza: Carefully place the assembled seat (which includes the backrest and armrests) onto the gas lift cylinder. Ensure it is centered and stable.
4. Position Lumbar Massage Cushion: If not pre-attached, position the lumbar massage cushion on the chair back. Connect the USB cable as instructed in the operating section.

Note: Specific screw and component attachment details are typically found in a detailed diagram included with the physical product. This guide provides general steps.

Torolàlana miasa

Fanitsiana ny haavony

The chair features a gas lift mechanism for easy height adjustment.

Image: Detail of the height adjustment lever.

To adjust the chair height:

• Manangana: While seated, lift the lever located under the right side of the seat. The chair will rise. Release the lever at the desired height.
• Ho ambany: While seated, lift the lever located under the right side of the seat. Apply slight pressure to the seat, and the chair will lower. Release the lever at the desired height.

360° Swivel and Mobility

The chair is designed with a 360-degree swivel function and five multi-directional casters for enhanced mobility.

Image: Detail of the chair's casters and their suitability for different floor types.

The casters are made of PU material, providing smooth and silent movement across various floor types, including hard floors.

Asa fanorana

The integrated lumbar cushion provides a vibration massage function.

Image: The lumbar massage cushion with its two vibration points.

Ampiasao ny asa fanorana:

• Fampifandraisana herinaratra: Connect the USB cable from the lumbar cushion to a suitable USB power source (e.g., computer USB port, USB wall adapter, power bank).


Sary: Eksamples of USB power sources for the massage function.

• Fampahavitrihana: Locate the control switch on the USB cable. Press the button to turn the vibration massage on or off.

The massage function is designed for relaxation and comfort, providing gentle vibrations to the lumbar area.

fikarakarana

FANADIOVANA

The chair features a velvet-look polyester upholstery. For cleaning:

• Fanadiovana toerana: For minor spills or stains, use a clean, damp cloth with a mild upholstery cleaner. Blot the area gently; do not rub vigorously.
• Fikarakarana tsy tapaka: Vacuum the chair regularly with a soft brush attachment to remove dust and debris.
• Ialao ny simika mahery vaika: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the fabric.

Fikarakarana ankapobeny

• Jereo ny fifandraisana: Jereo tsy tapaka ny visy sy ny fifandraisana rehetra mba hahazoana antoka fa mafy tsara izy ireo. Avereno henjanina raha ilaina.
• Fikojakojana ny Caster: Arovy tsy ho voahitsakitsaka volo sy poti-javatra ny kodiarana mba hivezivezy tsara.
• fitahirizana: Tehirizo ao amin'ny toerana maina ny seza, lavitry ny tara-masoandro mivantana sy ny mari-pana tafahoatra.

Fanamboarana

fepetra arahana

Image: Detailed dimensions of the chair.

Warranty sy fanohanana

For warranty information, technical support, or to order replacement parts, please contact HOMCOM customer service. Refer to your purchase documentation for specific contact details.

Please have your model number (921-298PK) and purchase date available when contacting support.