Walfront HT107D

Walfront HT107D Digital LCD Socket Tester User Manual

Model: HT107D | Brand: Walfront

1. Fampidirana

The Walfront HT107D Digital LCD Socket Tester is an advanced electrical testing device designed for quick and accurate detection of correct wiring connections in electrical sockets. It features a clear LCD display for voltage and frequency readings, and multiple LED indicators to identify various wiring faults. This manual provides essential information for safe and effective use of the device.

2. Information momba ny fiarovana

Please read and understand all safety warnings and operating instructions before using this device. Failure to do so may result in electric shock, fire, or serious injury.

  • Always ensure the device is in good working condition before use.
  • Do not use the tester if it appears damaged or if the casing is open.
  • Do not use the tester in wet conditions or with wet hands.
  • This device is designed for testing standard electrical sockets within its specified voltage range (90-250V). Do not use it for voltagivelan'ity elanelana ity.
  • The RCD test function should only be performed on circuits protected by a Residual Current Device (RCD) or Ground Fault Circuit Interrupter (GFCI). This test will trip the RCD/GFCI, cutting power to the circuit.
  • Always consult a qualified electrician if you detect any wiring faults or are unsure about electrical safety.
  • Arovy amin'ny ankizy.

3. Vokatra mihoatraview

The Walfront HT107D Socket Tester is a compact and portable tool for electrical safety.

Lafin-javatra fototra:

  • Advanced socket tester for quick detection of correct wiring.
  • Integrated RCD/GFCI test button for safety system verification.
  • 7 LED indicator modes to clearly display wiring status.
  • LCD display with backlight for frequency, phase voltage (L-N), and leakage voltage (N-E) readings.
  • Compact, lightweight, and easy-to-use design.

singa:

anoloana view of the Walfront HT107D Socket Tester showing the LCD screen, LED indicators, and RCD test button.
Sary 1: anoloana view of the Walfront HT107D Socket Tester. This image displays the device's main components including the LCD screen, the three LED indicator lights at the top, and the red RCD test button at the bottom.
  • LCD Display: Shows voltage (L-N, N-E) and frequency.
  • LED famantarana: Three lights at the top that illuminate in various patterns to indicate wiring status.
  • Bokotra fitsapana RCD: Red button used to test Residual Current Devices.
  • Plug EU: For insertion into standard European sockets.

4. Fametrahana

The Walfront HT107D Socket Tester requires no complex setup. It is ready for use directly out of the packaging.

  1. Hamarino tsara fa madio ny fitaovana fitsapana ny socket ary tsy misy fahasimbana hita maso.
  2. Tadiavo ny socket elektrika tianao hotsapaina.
  3. Carefully insert the Walfront HT107D Socket Tester into the socket.
Walfront HT107D Socket Tester plugged into a wall socket, displaying voltage sy frequence.
Sary 2: The Walfront HT107D Socket Tester plugged into a wall socket. The image shows the device actively displaying electrical parameters on its LCD screen, indicating it is powered on and performing a test.

5. Torolàlana miasa

Once the Walfront HT107D Socket Tester is plugged into a live socket, it will automatically begin testing and display the results.

  1. Fitsapana voalohany: Plug the tester into the socket. The LCD screen will light up, displaying the frequency (Hz), phase voltage (L-N), and leakage voltage (N-E). The LED indicators will also illuminate according to the detected wiring status.
  2. Famakiana ny LCD Display:
    • Hz: Indicates the frequency of the AC power supply.
    • LN: Mampiseho ny voltage between the Live and Neutral wires.
    • N-E: Mampiseho ny voltage between the Neutral and Earth (Ground) wires.
  3. Interpreting LED Indicators: Refer to Section 6, "Understanding the Indicators," for a detailed explanation of the LED patterns and their corresponding wiring conditions.
Close-up of the Walfront HT107D Socket Tester's LCD screen showing voltage and frequency readings, with the RCD test button visible.
Sary 3: Akaiky view of the Walfront HT107D Socket Tester's LCD screen. The display clearly shows "35mA" (likely during an RCD test), "226V" for L-N voltage, and "0V" for N-E voltage, along with the frequency.

6. Understanding the Indicators

The Walfront HT107D Socket Tester uses three LED indicator lights to quickly communicate the wiring status of the socket. Observe the pattern of the lights and compare it to the table below.

Diagram showing the Walfront HT107D Socket Tester's LED indicator patterns and their corresponding wiring conditions.
Sary 4: LED Indicator Light Guide for the HT107D Socket Tester. This diagram illustrates the various combinations of the three indicator lights (left, middle, right) and the specific wiring fault or correct condition each pattern represents.
Lamina famantaranaFepetra tariby
● ● ● (Left, Middle, Right ON)Fifandraisana marina
● ● ○ (Left, Middle ON, Right OFF)Open Ground (Unconnected ground wire)
● ○ ● (Left, Right ON, Middle OFF)Misokatra tsy miandany (Unconnected neutral wire)
○ ● ● (Middle, Right ON, Left OFF)Sokafy mivantana (Unconnected live wire)
● ○ ○ (Left ON, Middle, Right OFF)Live/Ground Reverse (Live wire and ground wire reversed)
○ ● ○ (Middle ON, Left, Right OFF)Live/Neutral Reverse (Live wire and neutral wire reversed)
○ ○ ● (Right ON, Left, Middle OFF)Live/Ground Reverse, Missing Ground (Live wire and ground wire reversed, and ground wire is missing)

Zava-dehibe: If any fault condition is indicated, do not use the socket and consult a qualified electrician immediately.

7. RCD Test Function

The RCD (Residual Current Device) test function is designed to verify the proper operation of RCDs or GFCIs in the electrical circuit. This test simulates a fault condition to ensure the RCD trips and cuts power, preventing electric shock.

  1. Ensure the socket tester is plugged into a socket that is part of an RCD/GFCI protected circuit.
  2. After the initial wiring test shows a "Correct Connection" (all three LEDs ON), press the red "RCD TEST" button on the tester.
  3. Observe the RCD/GFCI. A properly functioning RCD/GFCI should trip, cutting power to the circuit and turning off the tester's display and lights.
  4. If the RCD/GFCI does not trip, it indicates a potential fault with the RCD/GFCI itself or the wiring. Do not use the circuit and consult a qualified electrician.
  5. To restore power, reset the RCD/GFCI at your consumer unit/fuse box.

Tandremo: Performing the RCD test will temporarily cut power to the tested circuit. Ensure all sensitive equipment is safely shut down or disconnected before performing this test.

8. Fikojakojana

The Walfront HT107D Socket Tester requires minimal maintenance.

  • Fanadiovana: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquids enter the device.
  • fitahirizana: Tehirizo ao amin'ny toerana mangatsiaka sy maina ny fitaovana fandrefesana, lavitry ny tara-masoandro mivantana sy ny mari-pana tafahoatra. Tehirizo ao anaty fonosana tany am-boalohany na ao anaty boaty fiarovana rehefa tsy ampiasaina.
  • Fanaraha-maso: Periodically inspect the device for any signs of damage, such as cracks in the casing or bent pins. If damage is found, discontinue use and replace the device.

9. Famahana olana

If you encounter issues with your Walfront HT107D Socket Tester, refer to the following common problems and solutions:

OLANAAntony mety hitrangavahaolana
Tester does not light up or display anything.No power to the socket, or the socket is faulty.Test another known working socket. Check the circuit breaker or fuse for the circuit. If other sockets work, the original socket may be dead or faulty.
LED indicators show a fault, but the socket appears to work.Hidden wiring fault.The tester is designed to detect faults that may not be immediately obvious. Do not ignore fault indications. Consult a qualified electrician.
RCD test button does not trip the RCD/GFCI.Faulty RCD/GFCI, or the circuit is not protected by an RCD/GFCI.Ensure the circuit is indeed RCD/GFCI protected. If it is, the RCD/GFCI may be faulty and requires inspection by a qualified electrician. Do not use the circuit until it is verified safe.
Inconsistent readings or flickering display.Loose connection, unstable power supply, or device malfunction.Ensure the tester is firmly plugged into the socket. Test in another socket. If the problem persists, the device may be faulty and should be replaced.

For issues not covered here, please contact Walfront customer support or a qualified electrician.

10. Famaritana

fikiranasarobidy
Anaran'ny vokatraSocket Tester
MODELYHT107D
MarikaWalfront
Operating Voltage90-250V AC
Salan'ny Frequency45-65Hz
RCD Test Current> 30mA
KEVITRAFlame Retardant ABS
lokoMainty
StyleBOKYtage Tester
fanajanaCE
Max Temperature miasa40 degre Celsius
Firenena nihavianaCHINE

11. Warranty sy fanohanana

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Walfront products typically come with a standard manufacturer's warranty against defects in materials and workmanship.

For technical support, product inquiries, or assistance with troubleshooting, please visit the official Walfront webtranonkala na mifandraisa amin'ny sampan-draharahan'ny serivisy ho an'ny mpanjifa. Matetika ny antsipirian'ny fifandraisana dia hita eo amin'ny fonosan'ny vokatra na ny an'ny mpanamboatra website.

Fanamarihana: Tazomy foana ny porofon'ny fividiananao mba hahazoana antoka.

Documents mifandraika - HT107D

Preview Habotest Electrical Socket Tester Manual User
Boky torolalana feno ho an'ny Habotest Electrical Socket Tester, fampandehanana amin'ny antsipiriany, torolàlana momba ny fiarovana, famaritana ara-teknika, ary famahana olana amin'ny fitsapana socket sy RCD/GFCI.
Preview Habotest HT107D Digitální Zkoušečka Zásuvek - Uživatelská Příručka
Komplexní uživatelská příručka pro digitální zkoušečku zásuvek Habotest HT107D. Pokrývá funkce, bezpečnostní pokyny, technické specifikace, provoz a tabulku chyb.
Preview HABOTEST HT107D-EU Socket Tester Pro: Voltage, Wiring, ary Fitsapana RCD
Ny HABOTEST HT107D-EU dia tester socket compact ho an'ny fivoahana 90-250Vac. Manamarina ny voltage (Live-Neutral, Neutral-Ground), toeran'ny tariby (marina, mivadika, tsy hita), ary fiasa RCD (>30mA). Misy plug EU sy famantarana LED mazava.
Preview Habotest HT107D Socket Tester miaraka amin'ny RCD/GFCI - Vita ny vokatraview
Tapitra ny antsipirianyview an'ny Habotest HT107D digital socket tester, ahitana fitsapana RCD/GFCI, fampisehoana LCD mazava, ary endrika mirindra ho an'ny fampiasana an-trano sy matihanina. Ataovy azo antoka ny fiarovana amin'ny herinaratra miaraka amin'ity fitaovana fitiliana marobe ity.
Preview HABOTEST 2023 Katalaogin'ny vokatra: Metera ara-tontolo iainana, Multimetatra, Tester & Detectors
Tsidiho ny katalaogin'ny vokatra HABOTEST 2023 ahitana fitaovana fitiliana sy fandrefesana mazava tsara, anisan'izany ny metatra tontolo iainana, multimeter nomerika, smart cl.amp metatra, socket tester, insulation tester, ary voltage detectors. Mitadiava modely toa ny HT118C, HT126A, HT203A, HT107B, ary HT2302 ho an'ny fampiharana matihanina sy mpanjifa.
Preview Katalaogin'ny vokatra HABOTEST: Multimetatra nomerika, Mpandrana ary fitaovana fandrefesana
Fantaro ny karazana fitsapana elektronika sy fitaovana fandrefesana avy amin'ny HABOTEST. Ity katalaogy ity dia mampiseho multimeter nomerika, clamp metatra, insulation testers, voltage detectors, fakan-tsary mafana, sy ny maro hafa, natao ho an'ny fahitsiana sy azo itokisana amin'ny fampiharana isan-karazany.