1. Fampidirana
This manual provides instructions for the installation, operation, and maintenance of your Hunter Builder Plus 51111 52-inch Indoor Ceiling Fan with LED Lights. This traditional ceiling fan is designed to complement various room aesthetics while providing efficient air circulation and lighting. It features a Whisper Wind motor for quiet performance and dimmable LED bulbs for adjustable ambiance. The fan includes a three-position mounting system for versatile installation and reversible blades for seasonal use.

Figure 1: Hunter Builder Plus 51111 52-inch Ceiling Fan. An overhead view of the Hunter Builder Plus 51111 ceiling fan, showcasing its brushed nickel motor housing, five light wood-grain blades, and three frosted glass light shades.
2. Information momba ny fiarovana
Vakio sy fantaro ny toromarika rehetra alohan'ny hanombohan'ny fametrahana. Ny tsy fanarahana ireo toromarika ireo dia mety hiteraka fahatapahan-jiro, afo, na ratram-po.
- Fiarovana herinaratra: Always disconnect power at the main circuit breaker or fuse box before starting installation or performing any maintenance. Ensure all electrical connections comply with local codes and ordinances. If you are unfamiliar with electrical wiring, consult a qualified electrician.
- Mametraka: The fan must be mounted to a structurally sound ceiling joist or an outlet box rated for fan support (at least 35 lbs). Ensure the mounting location can support the fan's weight.
- Famafana ny blade: Maintain a minimum clearance of 7 feet from the floor to the bottom edge of the fan blades. Ensure there is adequate clearance from walls and other obstructions to prevent injury or damage.
- Fan Operation: Do not insert objects into the path of the fan blades while the fan is operating.
- Kit maivana: Ampiasao ihany ny karazana takamoa voatondro sy wattage. Allow bulbs to cool before replacing.
3. Ny votoatin'ny fonosana
Verify that all components listed below are included in your package before beginning installation. If any parts are missing or damaged, contact Hunter customer support.
- Fivoriamben'ny trano moto
- Lelan'ny mpankafy 5 (azo avadika)
- Blade Brackets
- Light Kit Assembly with 3 Frosted Glass Shades
- LED Light Bulbs (3 included)
- Lambam-pandriana sy fehikibo fametrahana
- Downrod 2-inch
- Downrod 3-inch
- Fonosana fitaovana (visy, milina fanasana, voanjo tariby)
- Pull Chains (ho an'ny hafainganan'ny mpankafy sy ny fanaraha-maso ny hazavana)
4. Fametrahana & Fametrahana
Follow these steps for proper installation of your ceiling fan. It is recommended to have two people for installation.
- Vonoy ny hery: Before starting, ensure power is disconnected at the circuit breaker or fuse box to prevent electrical shock.
- Mametraka bracket: Secure the mounting bracket to the ceiling outlet box. Ensure the outlet box is rated for ceiling fan support (minimum 35 lbs) and is securely fastened to a building structure.
- Assemble Downrod: Choose the appropriate downrod (2-inch or 3-inch) for your ceiling height. Feed the electrical wires from the fan motor through the downrod.
- Fivoriamben'ny mpankafy: Carefully lift the fan motor assembly and place the downrod ball into the mounting bracket. Ensure the tab in the mounting bracket aligns with the slot in the downrod ball.
- Wire ny fan: Connect the electrical wires from the fan to the house wiring according to the wiring diagram provided in the full instruction manual (not included here). Ensure all connections are secure with wire nuts.
- Lakandrano azo antoka: Atsofohy miakatra hatrany amin'ny valindrihana ny elo ary ampifandraiso amin'ny bracket fametrahana azy amin'ny alalan'ny visy omena.
- Attach Fan Blades: Attach each fan blade to its blade bracket using the provided screws. Then, attach the blade assemblies to the motor housing. The blades feature a reversible finish (light wood-grain and darker wood-grain); choose your preferred side.
- Mametraka Kit jiro: Connect the light kit wiring to the fan motor wiring. Secure the light kit assembly to the bottom of the fan motor housing. Install the three LED bulbs and then attach the frosted glass shades.
- Attach Pull Chains: Thread the decorative pull chains through the designated holes in the light kit.
- Ampodio hery: Rehefa vita ny fametrahana dia avereno indray ny herinaratra amin'ny fiatoana.

Figure 2: Fan installed in a bedroom. The Hunter Builder Plus 51111 ceiling fan mounted in a modern bedroom setting, demonstrating its aesthetic integration and size within a living space.

Figure 3: Fan installed in a living room. The Hunter Builder Plus 51111 ceiling fan installed in a spacious living room, highlighting its suitability for larger common areas.
5. Torolàlana miasa
Your Hunter Builder Plus 51111 ceiling fan is designed for ease of use with pull chain controls.
Fanaraha-maso ny hafainganam-pandehan'ny mpankafy
The fan speed is controlled by one of the pull chains. Each pull will cycle through the available speeds (High, Medium, Low, Off). Pull the chain until you reach your desired fan speed.
Fanaraha-maso ny hazavana
The light kit is controlled by the other pull chain. Pull the chain to turn the lights On or Off. The included LED bulbs are dimmable, allowing you to adjust the light intensity (dimming functionality may require specific wiring or a compatible dimmer switch, consult a qualified electrician if unsure).

Figure 4: Close-up of fan controls. A detailed view of the central motor housing and light kit of the Hunter Builder Plus 51111 fan, showing the brushed nickel finish, frosted glass shades, and the two pull chains for fan speed and light control.
Asa azo avadika amin'ny motera
The fan features a reversible motor for year-round comfort. A switch on the fan motor housing allows you to change the direction of blade rotation.
- Summer Operation (Downdraft): Set the switch to allow the blades to rotate counter-clockwise, creating a downdraft that produces a cooling breeze.
- Winter Operation (Updraft): Set the switch to allow the blades to rotate clockwise, creating an updraft that circulates warm air trapped near the ceiling, helping to warm the room.
Always turn off the fan and wait for the blades to stop completely before changing the direction of the motor.

Figure 5: Light wood-grain blade finish. A close-up image of one of the fan blades, featuring a light wood-grain texture on one side.

Figure 6: Dark wood-grain blade finish. A close-up image of one of the fan blades, featuring a darker wood-grain texture on the reverse side, indicating reversible blade finishes.
6. Fikojakojana
Ny fikojakojana tsy tapaka dia miantoka ny fahombiazana tsara indrindra sy ny faharetan'ny fantson-drivotrao.
- Fanadiovana: Mba hanadiovana ny mpankafy, fafao amin'ny lamba malefaka.amp lamba. Aza mampiasa mpanadio na solvents, fa mety hanimba ny famaranana izany.
- Fanadiovana ny lelafo: Fafao tsy tapaka ny vovoka eo amin'ny lelan'ny mpankafy mba hisorohana ny fiangonan'ny vovoka, izay mety hisy fiantraikany amin'ny fifandanjana sy ny fahombiazan'ny mpankafy.
- Fanoloana takamoa: Ensure power is off before replacing LED bulbs. Allow bulbs to cool completely. Replace with LED bulbs of the same type and wattage (6.5 watts, 1800 lumens, 3000 Kelvin, 120 volts).
- Henjana ny fasteners: Periodically check and tighten all screws and fasteners on the fan blades and mounting hardware to ensure secure operation.
7. Famahana olana
Raha sendra olana amin'ny mpankafy valindrihana ianao dia jereo ireto olana sy vahaolana mahazatra manaraka ireto:
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| Fan tsy manomboka | No power to the fan; Loose wire connections; Motor switch not engaged. | Check circuit breaker/fuse; Ensure all wire connections are secure; Verify the motor reverse switch is fully engaged in either direction. |
| Fan wobbles | Screws malalaka; Blades tsy mifandanja; bracket fametahana malalaka. | Tighten all blade screws; Use a balancing kit (sold separately) to balance blades; Ensure mounting bracket is securely fastened to the ceiling joist. |
| Tsy mandeha ny hazavana | Loose bulb; Faulty bulb; Loose wire connection in light kit. | Ensure bulbs are screwed in tightly; Replace bulbs; Check light kit wiring connections. |
| Hetsika mitabataba | Visy mivaha; Mitabataba ny motera; Mandondona sakana ny lelany. | Tighten all screws; Ensure canopy is not vibrating against the ceiling; Check for any obstructions in the blade path. |
8. Famaritana
| Marika | Hunter |
| Anarana modely | Mpamorona Plus |
| Laharana modely | 51111 |
| Ny refin'ny vokatra | 52" D x 52" W x 18.06" H |
| loko | Brushed Nickel finish |
| Isan'ny Blades | 5 |
| Karazana Switch | Misintona rojo vy |
| Loharanon-kery | AC |
| BOKYtage | 120 Volts |
| Wattage (Amboara maivana) | 6.5 watts (isaky ny takamoa) |
| Luminous Flux | 1800 Lumen |
| Karazana Bulb | LED |
| Fampiasana anatiny / ivelany | an-trano |
| Lanja entana | 18.96 kilao |
| UPC | 049694511119 |
9. Fampahalalana momba ny fiantohana
Your Hunter Builder Plus 51111 ceiling fan comes with a Limited Lifetime Motor Warranty. This warranty is backed by Hunter Fan Company, a manufacturer with over 130 years of experience in the fan business. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official Hunter website.
10. Fanohanana ny mpanjifa
For further assistance, troubleshooting, or to inquire about replacement parts, please contact Hunter customer support. You can find contact information on the official Hunter webtoerana na ao anatin'ny fitaovana fonosana.
Visit the official Hunter store for more information: Hunter Fan Company Store





