Sava lalana
This manual provides detailed instructions for the installation, operation, and maintenance of your Fantech 98506 PRO Plus Exhaust Fan. Please read this manual thoroughly before installation and use to ensure proper function and safety.
The Fantech 98506 PRO Plus is a high-performance exhaust fan designed for quiet and energy-efficient ventilation in bathrooms, powder rooms, and other areas up to 130 sq. ft. It features advanced motion and humidity sensors, a built-in backdraft damper, and a high-efficiency motor.
Information momba ny fiarovana
FAMPITANDREMANA:
- Tapaho foana ny herin'aratra alohan'ny hanitsiana na fanadiovana ny fitaovana.
- Ny fametrahana dia tsy maintsy ataon'ny elektrisianina mahafeno fepetra mifanaraka amin'ny kaody elektrika rehetra eo an-toerana sy nasionaly.
- Aza mampiasa ity mpankafy ity amin'ny fitaovana fanaraha-maso hafainganam-pandeha mafy.
- Hamarino tsara ny fanorenan-tany mba hampihenana ny mety ho fahatafintohinana herinaratra.
- This fan is for general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.
Fonosana fonosana
Hamarino fa misy ny singa rehetra alohan'ny hanombohan'ny fametrahana:
- Fantech 98506 PRO Plus Exhaust Fan unit
- Sensor Grille
- Adjustable 12-24" Bar Hanger
- Installation Hardware (e.g., screws, wire nuts)
If any parts are missing or damaged, contact Fantech customer support immediately.
Fametrahana sy fametrahana
The Fantech 98506 PRO Plus is designed for surface mount installation and uses a 6-inch flexible duct.
Lisitra mialoha ny fametrahana:
- Ataovy azo antoka fa mazava sy azo idirana ny faritra fametrahana.
- Confirm power supply is 120 Volts AC.
- Angony ireo fitaovana ilaina: tournevis, mpanala tariby, fandavahana, kasety fandrefesana, antsy fampiasa andavanandro, solomaso fiarovana, fonon-tanana.
- Verify ductwork is ready for a 6-inch connection.
Dingana fametrahana:
- Manomana ny fanokafana: Create an appropriate opening in the ceiling or wall for the fan housing. Refer to the fan's specific dimensions provided in the installation guide that accompanies the product.
- Tendrombohitra ny trano (Mount the Housing): Use the adjustable 12-24" bar hangers to securely mount the fan housing between joists or studs. Ensure the housing is level.
- Mampifandray ny fantsona: Attach the 6-inch flexible duct to the fan's duct collar. Secure with a duct clamp (not included). Ensure the duct run is as straight and short as possible for optimal performance.
- Wiring elektrika:
- Turn off power at the circuit breaker before wiring.
- Remove the electrical access plate on the fan housing.
- Connect the household wiring to the fan's wiring according to the wiring diagram provided with the unit (typically black to black, white to white, green/bare to ground).
- Ampifandraiso amin'ny voanjo tariby ny fifandraisana rehetra.
- Replace the electrical access plate.
- Mametraha Grille: Once the fan housing and wiring are complete, attach the sensor grille to the fan housing. The grille typically snaps into place or is secured with small screws.
Image: The Fantech 98506 PRO Plus Exhaust Fan showing the main unit, duct connection, and the white sensor grille. This view illustrates the components involved in the surface mount installation.
Torolàlana miasa
The Fantech 98506 PRO Plus Exhaust Fan is designed for automatic and manual operation, featuring integrated motion and humidity sensors.
Fanitsiana rivotra:
The fan offers four adjustable airflow settings: 80, 90, 110, and 140 cubic feet per minute (cfm). These settings are typically adjusted via a switch or dial located on the fan unit or sensor grille. Consult the specific wiring diagram for details on how to select the desired CFM setting during installation or initial setup.
Fampiasana sensor:
- Motion Sensor: The fan will activate automatically when motion is detected in the room. It will continue to run for a set period after motion ceases (this duration is often adjustable, refer to specific sensor instructions).
- Sensor Humidity: The fan will activate automatically when the humidity level in the room exceeds a pre-set threshold. It will continue to run until the humidity level drops below the threshold. The sensitivity of the humidity sensor may be adjustable.
For optimal performance, ensure the sensors are not obstructed and are positioned to effectively monitor the room conditions.
fikarakarana
Regular maintenance ensures the longevity and efficient operation of your Fantech exhaust fan.
Cleaning the Grille and Fan Blades:
- Tapaka ny hery: Always turn off power to the fan at the circuit breaker before cleaning.
- Esory ny grille: Carefully remove the sensor grille from the fan housing.
- Clean Grille: Wash the grille with mild soap and water. Rinse thoroughly and allow to dry completely before reinstallation.
- Fanadiovana ny fanala lelany: Use a soft cloth or brush to gently wipe dust and debris from the fan blades and interior of the housing. A vacuum cleaner with a brush attachment can also be used. Do not use abrasive cleaners or solvents.
- Avereno apetraka ny Grille: Once clean and dry, reattach the grille to the fan housing.
- Ampodio hery: Avereno ny herinaratra amin'ny fiatoana.
Frequency: Clean the grille and fan blades at least once every six months, or more frequently in dusty environments.
Fanamboarana
Jereo ny tabilao manaraka raha mila fanazavana momba ireo olana mahazatra sy ny vahaolana amin'izany.
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| Tsy mandeha ny fan. | Tsy misy herinaratra ho an'ny vondrona. Tafintohina ny mpandika faritra. Ny fifandraisana wiring malalaka. Tsy fahampian'ny sensor. |
Jereo ny famatsiana herinaratra. Avereno ny fiatoana. Hamarino ny fifandraisan'ny tariby (miaraka amin'ny herinaratra). Contact Fantech support if sensors are suspected. |
| Mitabataba ny mpankafy. | Maloto ny lelan'ny fan. Fametrahana malalaka. Tsakàna amin'ny lalan-drà. Olana motera. |
Diovy ny fanilo. Ensure fan housing is securely mounted. Check ductwork for blockages. Contact Fantech support. |
| Ny mpankafy dia mandeha tsy tapaka. | Humidity sensor setting too low. Motion sensor constantly triggered. Olana wiring. |
Adjust humidity sensor threshold. Ensure no constant motion in sensor's field of view. Hamarino ny wiring. |
| Fahombiazan'ny fivezivezen'ny rivotra ratsy. | Ductwork obstruction or leak. Incorrect CFM setting. Maloto ny lelan'ny fan. |
Check ductwork for blockages or leaks. Verify CFM setting is appropriate for room size. Diovy ny fanilo. |
If the problem persists after attempting these solutions, please contact Fantech customer support.
fepetra arahana
| toetra | sarobidy |
|---|---|
| Laharana modely | 98506 |
| Marika | FANTECH |
| Fahavitan'ny rivotra | 140 CFM (adjustable to 80, 90, 110 CFM) |
| Haben'ny fantsona | 6 santimetatra |
| BOKYtage | 120 Volt AC |
| Wattage | 26 watts |
| Sones Rating | Less than 0.5 Sones |
| Sela Mpandray Hafanana | Motion and Humidity |
| Karazana fametrahana | Surface Mount (with adjustable 12-24" bar hanger) |
| Certifications | ETL Listed, ENERGY STAR, HVI Qualified, California Title 24 Listed |
| Haben'ny Efitrano Recommended | Hatramin'ny 130 sq. ft. |
| Dimensions (Approx. Package) | 18.1 x 14.68 x 10.24 santimetatra |
| Weight (Approx. Package) | 14 kilao |
Warranty Information
Fantech products are manufactured to the highest quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Fantech website. Tehirizo ny porofon'ny fividiananao ho an'ny fitakiana fiantohana.
Fanohanana ny mpanjifa
For technical assistance, replacement parts, or warranty inquiries, please contact Fantech customer support:
- Webtranokala: www.fantech.net
- Telefaonina: Refer to the contact information on the Fantech webtoerana na fonosana vokatra.
Rehefa mifandray amin'ny fanohanana dia omeo azafady ny laharanao modely (98506) sy ny datin'ny fividianana.
