myTouchSmart 48707 Rotatable Outdoor Digital Yard Stake Timer Instruction Manual

Sava lalana

This manual provides detailed instructions for the safe and efficient operation of your myTouchSmart 48707 Rotatable Outdoor Digital Yard Stake Timer. Please read this manual thoroughly before installation and use, and retain it for future reference. This device is designed to automate outdoor lighting and other electrical appliances with programmable on/off times, light-sensing technology, and multiple grounded outlets.

Fampahalalana manan-danja momba ny fiarovana

• Ny mety hisian'ny fahatairana elektrika: Use only with a GFCI-protected outdoor outlet. Do not immerse in water.
• Fanorenana mety: Ensure the timer is properly grounded.
• Fiarovana be loatra: Do not exceed the maximum electrical rating of 125V, 60 Hz, 1875W (15A) general/resistive.
• Fametrahana: Place the stake in a location with direct access to sunlight for optimal light sensor function. Ensure the unit is at least 1 foot above ground level to prevent waterlogging.
• Saron'ny fivoahana: Keep individual self-closing protective outlet covers closed when not in use to prevent moisture and debris entry.
• Fitantanana tariby: Route cords to prevent tripping hazards and damage.
• Fikojakojana: Tapaho ny herinaratra alohan'ny hanaovana fikojakojana na fanadiovana.

Fonosana fonosana

• myTouchSmart Rotatable Outdoor Digital Yard Stake Timer (Model 48707)
• Ground Stake (multi-section)
• Boky torolalana

Endriky ny vokatra

• Rotatable Outlets: Six grounded outlets, three of which rotate 180 degrees for flexible access.
• Timer nomerika: Programmable with custom ON/OFF times.
• Fahazavana sensor: Automatic dusk-to-dawn operation or 6-hour countdown after sunset.
• Mahatohitra ny toetr'andro: Durable construction with self-closing protective outlet covers.
• 10ft Cord: Provides extended reach for outdoor placement.
• Fiarovana be loatra: Integrated 15A/1875W circuit breaker for safety.

Hametraka

1. Assemble the stake: Attach the stake sections together and then to the timer unit.
2. Fametrahana: Insert the assembled stake firmly into the ground in your desired outdoor location. Ensure the timer unit is at least 1 foot above ground level and has direct access to sunlight if using light-sensing features.
3. Fifandraisana herinaratra voalohany: Plug the timer's power cord into a GFCI-protected outdoor outlet. If the display is blank, allow the timer to charge for at least 30 minutes to power the internal battery.
4. Avereno ny fameram-potoana: Using a small, non-metallic, insulated tool (like a pencil tip or toothpick), press the RESET button located on the control panel. The LCD display will illuminate and show "12:00 AM".
5. mampifandray fitaovana: Plug your outdoor lights or appliances into the grounded outlets. Rotate the outlets as needed for optimal cord management. Close the protective covers over unused outlets.

Torolàlana miasa

1. Setting Day & Time

1. Tsindrio ary hazòny ny CLOCK bokotra.
2. Nandritra ny fihazonana CLOCK, tsindrio ny HERINANDRO button repeatedly until the desired day of the week appears at the top of the display.
3. Tohizo ny fihazonana CLOCK, ary tsindrio ny HOUR button repeatedly to set the current hour (AM/PM will adjust automatically).
4. Still holding CLOCK, tsindrio ny MIN tsindrio imbetsaka ny bokotra mba hametrahana ny minitra ankehitriny.
5. Alefaso ny CLOCK bokotra hitehirizana ny fikirana.

2. Setting Programs (ON/OFF Times)

The timer allows for two custom ON/OFF programs. Follow these steps for each program:

1. Tsindrio ny PROG button once. The display will show "1 ON" at the bottom left. This indicates you are setting the ON time for Program 1.
2. Tsindrio ny HERINANDRO button repeatedly to select the desired day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or various combinations).
3. Tsindrio ny HOUR button to set the desired ON hour.
4. Tsindrio ny MIN button to set the desired ON minute.
5. Tsindrio ny PROG button again. The display will show "1 OFF". This indicates you are setting the OFF time for Program 1.
6. Repeat steps 2-4 to set the desired OFF day(s), hour, and minute for Program 1.
7. To set Program 2, press the PROG button again until "2 ON" appears, then repeat steps 2-6.
8. Aorian'ny fametrahana ny programa tiana rehetra, tsindrio ny CLOCK bokotra hiverina amin'ny efijery lehibe.

To clear a program: raha viewing the program (e.g., "1 ON" or "1 OFF"), press the R (Reset) button. Four dashes will appear, indicating the program is cleared. Press R again to reactivate it.

3. Auto/Manual Settings

To use your programmed settings, the timer must be in AUTO mode. To switch between modes:

• Tsindrio ary hazòny ny BOKY button for 4 seconds. The display will cycle through AUTO ON, AUTO OFF, and MANUAL.
• OTOMATIKA: The timer will remain ON until the next programmed OFF time.
• OTOMATIKA: The timer will remain OFF until the next programmed ON time.
• MANUAL: The timer will ignore all programmed settings and act as a simple ON/OFF switch.

4. Light Sensor Modes (Dusk-to-Dawn, Countdown)

The timer features light-sensing technology for automatic operation based on ambient light. Ensure the light sensor (located on the top of the unit) is unobstructed and receives direct sunlight for optimal performance.

• hariva-hatramin'ny maraina: The timer will automatically turn ON at dusk and remain ON until dawn.
• Counter Timer: The timer will turn ON at dusk and remain ON for a preset duration (e.g., 6 hours).

Refer to the specific button on your timer labeled "Sensor" or "Timer" to cycle through these modes. The product description mentions "6-Hour Countdown" and "dawn to dusk" as presets.

5. Security/Vacation Mode (Random Function)

This mode randomly adjusts your programmed ON/OFF times to give your home a lived-in appearance, deterring potential intruders. To activate this feature, you must have at least one program set for longer than 33 minutes.

1. Tsindrio ny HERINANDRO SY HOUR buttons simultaneously. "RND" will appear to the right of the display, indicating Random mode is active.
2. In this mode, programmed ON/OFF times will be randomly postponed by 2 to 32 minutes.
3. Tsindrio ny bokotra raha te-hanafoana ny HERINANDRO SY HOUR buttons simultaneously again. "RND" will disappear.

6. Daylight Saving Mode

To adjust the time for Daylight Saving:

1. Tsindrio ny HOUR SY MIN buttons simultaneously. The time will adjust by one hour forward or backward.
2. This function must be manually enabled or disabled as needed.

fikarakarana

• Regularly inspect the timer and cord for any signs of damage, fraying, or wear.
• Keep the light sensor clean and free from debris to ensure accurate dusk/dawn detection.
• Ensure all unused outlets have their protective covers securely closed.
• Diovy ny fitaovana amin'ny malefaka, damp lamba. Aza mampiasa akora simika mahery vaika na fanadiovana maloto.

Fanamboarana

fepetra arahana

Warranty sy fanohanana

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the myTouchSmart official website. Tehirizo ny tapakila fividiananao ho porofon'ny fividianana.