1. Fampidirana
This manual provides detailed instructions for the setup, operation, and maintenance of your Waveshare 5.5-inch Capacitive Touch AMOLED Display. This high-resolution display features a 1080x1920 pixel AMOLED panel with 5-point capacitive touch control, protected by a toughened glass panel. It is designed for use with Raspberry Pi 4B and can also function as a general computer monitor.
2. Ny votoatin'ny fonosana
Please verify that all items listed below are included in your package. If any components are missing or damaged, please contact customer support.
Figure 2.1: Included components of the Waveshare 5.5-inch AMOLED Display kit.
- 5.5-inch HDMI AMOLED Display
- Protective Case (A)
- Fan mangatsiaka
- Adapter HDMI
- USB adaptatera
- Screw Pack (various sizes for assembly)
3. Ny endri-javatra sy ny famaritana ny vokatra
The Waveshare 5.5-inch AMOLED Display offers advanced features for a superior visual and interactive experience.
Sary 3.1: Tapitraview of display features.
Famaritana ara-teknika:
- Haben'ny efijery: 5.5 santimetatra
- fanapahan-kevitra: 1080x1920 pixels (H×V), portrait by default
- Panel tontonana: AMOLED
- Asehoy Interface: HDMI
- Karazana mikasika: Fikasihana Kapasitiva 5-teboka
- Touch Panel: Toughened Glass, up to 6H hardness
- Viewangle: 170°
- Audio Output: 3.5mm audio jack, supports HDMI audio output
- Fampidirana herinaratra: 5 Volts
- Lanja entana: 13.5 oz
- Ny haben'ny fonosana: 9.17 x 6.57 x 2.83 santimetatra
4. Fametrahana sy fametrahana
4.1 Fifanarahana amin'ny rafitra
The display is compatible with various operating systems, primarily for Raspberry Pi and as a secondary monitor for Windows systems.
Figure 4.1: Supported devices and operating systems.
- When used with Raspberry Pi: Supports Raspberry Pi OS, Ubuntu, Kali, and Retropie. For Raspberry Pi OS, 5-point touch is supported. For Ubuntu/Kali, single-point touch is supported. All are driver-free.
- When used as a computer monitor: Supports Windows 11/10/8.1/8/7.
- Fanamarihana manan-danja: This display is specifically designed for use with Raspberry Pi 4B only.
4.2 Fifandraisana Eksampl'
Follow these steps to connect the display to your Raspberry Pi 4B.
Figure 4.2: Connection to Raspberry Pi 4B.
- Assemble the protective case around the display and Raspberry Pi 4B, ensuring the cooling fan is properly installed.
- Connect the HDMI adapter from the display to the HDMI port on the Raspberry Pi 4B.
- Connect the USB adapter from the display's USB port to a USB port on the Raspberry Pi 4B. This provides power to the display and enables touch functionality.
- Ensure a stable 5V/3A power supply is connected to the Raspberry Pi.
Tandremo: The glass panel of the AMOLED display is fragile without its enclosure. Exercise extreme care when handling. Always hold the Printed Circuit Board Assembly (PCBA) when plugging or unplugging HDMI and USB cables to prevent undue pressure on the glass panel.
5. Torolàlana miasa
5.1 Fironan'ny fampisehoana
The display's native resolution is 1080x1920, which means it operates in portrait mode by default. To change the display orientation to landscape, you will need to adjust the software configuration on your Raspberry Pi or connected computer. Refer to the operating system's display settings for specific instructions.
Sary 5.1: Asehoy viewamin'ny angles.
5.2 Fanaraha-maso
The display features a 5-point capacitive touch screen, allowing for multi-touch gestures. The number of supported touch points may vary depending on the operating system used.
Figure 5.2: Demonstrating 5-point touch control.
6. Ny endrika sy ny refy
Understanding the physical layout and dimensions of the display is important for integration into projects.
Figure 6.1: Physical dimensions and component layout.
- Refy ankapobeny: Approximately 144.26mm (width) x 78.66mm (height) x 33.30mm (depth, including case).
- singa fototra: Includes a cooling fan vent for heat dissipation and clearly marked Raspberry Pi connectors for easy integration.
7. Famahana olana
If you encounter issues with your display, consider the following general troubleshooting steps:
- Tsy misy fampisehoana: Ensure all HDMI and USB connections are secure. Verify the Raspberry Pi is powered on and outputting video. Check the display's power connection.
- No Touch Functionality: Confirm the USB connection for touch is properly established. Ensure your operating system drivers are correctly configured (though most are driver-free, specific OS versions might require adjustments).
- Incorrect Display Orientation: Adjust the display settings within your operating system's configuration.
- Sary miredareda na mikorontana: Check HDMI cable integrity. Ensure the power supply to the Raspberry Pi is sufficient and stable.
8. Fanohanana
For further technical support, detailed documentation, or warranty information, please visit the official Waveshare website or contact their customer service department. Online user manuals and additional resources are typically available on the manufacturer's product page.
Waveshare Ofisialy Webtranokala: www.fiveshare.com
