Sava lalana
Welcome to your Satco S11540 LED bulb. This manual provides essential information for the safe installation, operation, and maintenance of your new LED light bulb. Please read these instructions carefully before use and retain them for future reference.
This LED bulb is designed to provide efficient and warm illumination. It features 9.5 Watts of power consumption, a 2700K warm white color temperature, a GU24 twist-and-lock base, and operates at 120 Volts. It is intended for indoor use only.
Image: The Satco S11540 LED bulb, featuring a frosted finish and a GU24 base. This image illustrates the overall design of the product.
Fampahalalana manan-danja momba ny fiarovana
Mba hiantohana ny fampandehanana azo antoka sy hisorohana ny fahasimbana dia tandremo ireto fepetra fiarovana manaraka ireto:
- Mamono hery: Always turn off the power to the fixture at the circuit breaker or fuse box before installing, removing, or cleaning the bulb.
- Fampiasana anatiny ihany: This bulb is designed for indoor applications. Do not use it in outdoor fixtures or in areas exposed to moisture unless the fixture is specifically rated for such conditions.
- BOKYtage Compatibility: Hamarino tsara ny habetsaky ny herinaratratage (120V) matches the bulb's voltage.
- Karazana fototra: Only use this bulb in fixtures designed for a GU24 base. Forcing it into an incompatible socket can cause damage or electrical hazard.
- Tsy misy fandravana: Do not attempt to disassemble, modify, or repair the bulb. This can lead to electric shock, fire, or void the warranty.
- hafanana: Although LED bulbs run cooler than incandescent bulbs, they still generate some heat. Allow the bulb to cool before handling.
- fanariana: Ario ny takamoa araka ny lalàna eo an-toerana momba ny fako elektronika.
Torolàlana fametrahana
Follow these steps to properly install your Satco S11540 LED bulb:
- Vonoy ny hery: Locate the light fixture's power switch and turn it to the OFF position. For added safety, turn off the power at the circuit breaker or fuse box.
- Esory ny takamoa taloha (raha azo atao): If replacing an existing bulb, allow it to cool completely. Then, gently twist the old GU24 bulb counter-clockwise to unlock and remove it from the socket.
- Asio takamoa vaovao: Align the two pins of the Satco S11540 LED bulb with the slots in the GU24 socket. Gently push the bulb into the socket and twist clockwise until it locks securely into place. Do not overtighten.
- Ampodio hery: Turn the power back on at the circuit breaker or fuse box, then turn on the light switch to test the new bulb.
hetsika
Operating your Satco S11540 LED bulb is straightforward:
- Mandeha: Activate the light switch connected to the fixture to illuminate the bulb.
- Mamono: Deactivate the light switch to turn off the bulb.
This bulb is designed for standard on/off functionality. It is not specified as dimmable, so avoid using it with dimmer switches unless explicitly stated otherwise by the manufacturer to prevent damage or malfunction.
fikarakarana
The Satco S11540 LED bulb requires minimal maintenance to ensure its longevity and performance:
- Fanadiovana: Before cleaning, always turn off the power to the fixture and allow the bulb to cool. Use a soft, dry, lint-free cloth to gently wipe the bulb. Do not use liquid cleaners, abrasive materials, or chemical solvents, as these can damage the bulb's finish or internal components.
- Fanoloana: When the bulb reaches the end of its lifespan, follow the installation instructions in reverse to safely remove and replace it with a new, compatible GU24 LED bulb.
Fanamboarana
If you encounter issues with your Satco S11540 LED bulb, refer to the following table for common problems and solutions:
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| Tsy mirehitra ny jiro | No power to the fixture; Bulb not properly seated; Bulb has reached end of life | Check power switch and circuit breaker; Ensure bulb is securely twisted into the GU24 socket; Replace bulb if necessary |
| Bulb flickers | Loose connection; Incompatible dimmer switch; Voltage fiovaovana | Ensure bulb is securely seated; Remove any dimmer switches if the bulb is not rated for dimming; Consult an electrician for persistent voltage olana |
| Bulb is too dim or too bright | Incorrect bulb for application; Incompatible dimmer switch | Verify the bulb's specifications (wattage, lumens) match your lighting needs; Ensure no dimmer switch is in use if the bulb is not dimmable |
Product Specifications
Detailed specifications for the Satco S11540 LED Bulb:
- marika: Satco
- Anaran'ny modely: S11540
- Karazana hazavana: LED
- Wattage: 9.5 Watts (Power Consumption)
- Mitovitovy amin'ny incandescent Wattage: 60 Watts
- Temperature loko: 2700 Kelvin (Fotsy mafana)
- Famirapiratana fotsy: 800 Lumens
- Tany fototra: GU24
- BOKYtage: 120 Volts
- Accepted Voltage Frequency: 100 hatramin'ny 240 Volts sy 60 Hertz
- Haben'ny takamoa: T3
- endrika: Candle(C)
- Fitaovana: Glass
- vita: Frosted
- Fampiasana anatiny/ ivelany: an-trano
- Salanisan'ny fiainana: 2.86 Years (based on 10 hours/day usage)
- Fanondroana loko (CRI): 80
- fahombiazana: 84.21 lm/W
- Haben'ny vokatra: 2.76 x 2.76 x 2.95 santimetatra
- Lanja entana: 2.88 oz
- Endri-javatra manokana: Mitsitsy angovo
Warranty sy fanohanana
Information momba ny fiantohana: This Satco S11540 LED bulb comes with a 5-year limited warranty, based on 10 hours of use per day. Please retain your proof of purchase for warranty claims.
Fanohanana ny mpanjifa: For technical assistance, warranty inquiries, or further information regarding your Satco product, please contact Satco customer service directly. Refer to the official Satco webtoerana na fonosana vokatra ho an'ny antsipiriany mifandray amin'izao fotoana izao.
