Sava lalana
This manual provides comprehensive instructions for the setup, operation, and maintenance of your waveshare 7-inch Capacitive Touch LCD Display Kit for Raspberry Pi 4 Model B. Please read this manual thoroughly before use to ensure proper functionality and to maximize your product experience.
Fonosana fonosana
Hamarino fa ny entana rehetra voatanisa etsy ambany dia tafiditra ao anatin'ny fonosanao:
- 7-inch Capacitive Touch LCD Display
- Raspberry Pi 4 Model B (4GB RAM version)
- MicroSD Card (pre-loaded with system, typically 16GB)
- USB Power Adapter
- USB-A to USB-C Cable (for power)
- HDMI Cable (Micro HDMI to Standard HDMI)
- USB-A to Micro USB Cable (for touch functionality)
- Acrylic Case components (top, bottom, side panels, stand)
- Mounting hardware (screws, standoffs)
- MicroSD Card Reader
Image: All components included in the waveshare 7-inch Display Kit, including the LCD, Raspberry Pi 4, cables, power adapter, acrylic case parts, and a microSD card with reader.
Torolàlana fametrahana
Follow these steps to assemble and set up your display kit:
- Manomana ny Raspberry Pi: Insert the provided MicroSD card into the Raspberry Pi 4 Model B.
- Mametraka ny Raspberry Pi: Secure the Raspberry Pi 4 to the back of the 7-inch LCD display using the provided standoffs and screws. Ensure proper alignment with the display's connectors.
- Connect Display Cables:
- Connect one end of the Micro HDMI cable to the Raspberry Pi's Micro HDMI port and the other end to the display's HDMI input.
- Connect the USB-A to Micro USB cable from a USB 2.0 port on the Raspberry Pi to the Micro USB port on the display. This provides power for the display's backlight and enables touch functionality.
- Assemble the Acrylic Case: Carefully attach the acrylic case components around the assembled display and Raspberry Pi. Refer to the case assembly diagram for correct orientation.
- Hery mampifandray: Plug the USB power adapter into a wall outlet and connect the USB-A to USB-C cable to the Raspberry Pi's USB-C power input.
- Fanombohana voalohany: The system should power on automatically. The display will show the boot sequence.
Image: The fully assembled waveshare 7-inch Display Kit, showing the Raspberry Pi 4 mounted behind the screen, connected with cables, and powered by an adapter.
hetsika
Once the display kit is powered on, the pre-installed operating system (typically Raspbian) will boot. You can interact with the system using the capacitive touch screen.
- Fampiasa mikasika: The 7-inch display supports up to five-point capacitive touch when running Raspbian. For other supported operating systems like Ubuntu, Kali, or WIN10 IoT, it typically supports single-point touch.
- Periferika mampifandray: Use the USB ports on the Raspberry Pi to connect a keyboard, mouse, or other USB devices as needed.
- Fifandraisana tambajotra: The Raspberry Pi 4 supports Gigabit Ethernet and 2.4/5GHz Wi-Fi for internet access.
- Audio Output: Audio can be output via the 3.5mm audio jack or HDMI.
Image: A hand interacting with the capacitive touch screen, demonstrating its functionality with a graphical user interface.
Rafitra fandidiana tohanana
The waveshare 7-inch Display Kit is compatible with various operating systems for the Raspberry Pi 4 Model B:
- Raspbian: Manohana fikasihana dimy teboka, tsy mila mpamily.
- Ubuntu / Kali / WIN10 IoT: Manohana fikasihana teboka tokana, tsy misy mpamily.
- Retropie: Driver-free support.
Image: Visual representation of the display showing different viewing angles and indicating support for various operating systems like Raspbian, Ubuntu, Kali, and Windows 10 IoT.
Endri-javatra fototra
- 7-inch IPS Display: MANERAN- viewing angle with 1024x600 resolution.
- Fikasihana Kapasitiva: Supports 5-point touch (with Raspbian) for intuitive interaction.
- Integrated Raspberry Pi 4: Powered by Broadcom BCM2711B0 Quad-core 64-bit SoC.
- fahatsiarovana: 4GB LPDDR4 RAM.
- Fifandraisana: Dual-band 2.4/5GHz Wi-Fi, Bluetooth 5.0, Gigabit Ethernet.
- Seranana: 2x USB 3.0, 2x USB 2.0, 2x Micro HDMI (up to 4Kp60), 4-pole stereo audio, 2-lane MIPI DSI display port, 2-lane MIPI CSI camera port, 40-pin GPIO header.
- Fampidirana herinaratra: USB-C 5V/3A.
- fitahirizana: Micro SD karatra slot.
Image: Detailed diagram of the Raspberry Pi 4 Model B board, highlighting its processor, RAM, various ports (USB, HDMI, Ethernet, GPIO), and wireless capabilities.
fikarakarana
- Fanadiovana: Use a soft, dry cloth to clean the display and case. For stubborn smudges on the screen, a slightly damp, azo ampiasaina ny lamba tsy misy volo. Fadio ny mpanadio na solvents izay manimba zavatra.
- Fanavaozana rindrambaiko: Regularly update the operating system and installed software on your Raspberry Pi to ensure optimal performance and security.
- Fepetra ara-tontolo iainana: Operate the device in a clean, dry environment. Avoid extreme temperatures, direct sunlight, and high humidity.
- Fitantanana herinaratra: Always shut down the Raspberry Pi gracefully through the operating system before disconnecting power to prevent data corruption.
Fanamboarana
- Tsy misy vokatra aseho:
- Ensure the Micro HDMI cable is securely connected to both the Raspberry Pi and the display.
- Verify the Raspberry Pi is receiving power (check the power LED on the Pi).
- Confirm the MicroSD card is properly inserted and contains a valid operating system image.
- Touch screen not responding:
- Check that the USB-A to Micro USB cable is connected from the Raspberry Pi to the display.
- Ensure the operating system supports touch functionality and that necessary drivers (if any, though typically driver-free for supported OS) are loaded.
- Restart the Raspberry Pi.
- System not booting:
- Confirm the power supply is adequate (5V/3A recommended for Raspberry Pi 4).
- Re-flash the operating system image onto the MicroSD card.
- Hamarino raha misy fifandraisana mivaha na singa simba.
Famaritana ara-teknika
| Haben'ny fampisehoana | 7 santimetatra |
| vahaolana | 1024x600 |
| Karazana tontonana | IPS |
| Karazana mikasika | Capacitive (5-point with Raspbian, 1-point with others) |
| processeur | Broadcom BCM2711B0, Quad-core 64-bit SoC |
| ram | 4 GB LPDDR4 |
| fitahirizana | 16 GB MicroSD Card (included) |
| Wireless fifandraisana | 2.4/5GHz Wi-Fi, Bluetooth 5.0 |
| Wired Connectivity | Gigabit Ethernet |
| Video Output | 2x Micro HDMI (up to 4Kp60) |
| Audio Output | 4-pole stereo audio jack |
| Port USB | 2x USB 3.0, 2x USB 2.0 |
| Fampidirana herinaratra | USB-C 5V/3A |
| refy (fonosana) | 9.06 x 6.69 x 2.76 santimetatra |
| Lanja entana | 1.43 kg |
Image: Technical drawing showing the dimensions of the 7-inch display in millimeters and illustrating the two available stand angles (45° and 60°) for the acrylic case.
Warranty sy fanohanana
For warranty information and technical support, please refer to the official waveshare webtranokala na mifandray mivantana amin'ny serivisy mpanjifany. Tehirizo ny tapakila fividiananao ho porofon'ny fividianana ho an'ny fitakiana fiantohana.
Loharano an-tserasera: For additional documentation, tutorials, and community support, visit the waveshare official website.