UltraPro 24-inch Hardwired Under Cabinet LED Light Fixture (Model 45368) Instruction Manual

1. Information momba ny fiarovana

Please read and understand all safety instructions before attempting to assemble, operate, or install this product. Failure to follow these instructions may result in electric shock, fire, or other injuries.

• FAMPITANDREMANA: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation.
• Do not install the LED light fixture while it is plugged into an outlet.
• If you are not comfortable installing the fixture, contact a qualified electrician.
• Ensure your mounting location is dry and capable of supporting the fixture's weight.
• The mounting location must be within a suitable distance from the light fixture to reach the nearest power outlet.
• Ity fitaovana ity dia natao ho an'ny fampiasana anatiny ihany.

2. Ny votoatin'ny fonosana

Hamarino fa misy ny singa rehetra alohan'ny hanombohan'ny fametrahana:

• LED Light Fixture (A)
• Light Mounting Screws (B)
• Strain Relief Assembly (C)

3. Fitaovana ilaina

The following tools are required for installation (not included):

• 1/16 inch drill bit (for soft wood)
• 3/32 inch drill bit (for hard wood)
• Screwdriver
• pliers

4. Torolàlana fametrahana

Follow these steps to properly install your UltraPro under cabinet light fixture:

1. Omano ny Fixture: Remove the lens diffuser by lightly pulling the rear edge towards the front and upward. Remove the screws on the top of the cover. Firmly push forward on the bottom front of the housing to unlatch it from the catch points, revealing the hardware kit inside.
2. Mark Mounting Location: Hold the fixture base in place as a template and mark the locations for pilot holes on your mounting surface.
3. Prepare Knockouts: Choose a suitable knockout location from those provided on the fixture and remove them using your screwdriver.
4. Install Strain Relief: Remove the nut and lock washer from the strain relief assembly. Insert the threaded end of the strain relief into the chosen knockout. Secure it by tightening the nut and lock washer. Pliers may be used for additional tightening if needed.
5. Lavaka alohan'ny fandavahana (P-Drill Hole): Use the appropriate drill bit (1/16 inch for soft wood, 3/32 inch for hard wood) to pre-drill holes in the spots you marked. Leave screw heads protruding about 1/8 inch beyond the surface.
6. Apetraho ny fotony: Line up the screws with the keyhole tabs on the fixture base. Fasten the base by sliding the fixture into place and tightening the screws.
7. Connect Wiring: Install and secure the armored cable to meet local electrical codes. Carefully connect the hot AC supply wire to the hot wire of the fixture using the provided wire quick connects. Carefully connect the neutral AC supply wire to the neutral wire of the fixture using the provided wire quick connects. Carefully connect the ground AC supply wire to the ground of the fixture using the provided wire quick connects. Pull wires to check for tightness. If your electrical system contains no grounding wire, consult a qualified electrician before proceeding.
8. Avereno amboarina ny fitaovana: Ensure that no bare wires are exposed. Reattach the cover housing. Secure the screws and washers, double-checking that all connections are properly sealed inside the fixture.
9. Dingana farany: Reinsert the lens diffuser. Restore power to your circuit breaker or fuse box.

Fametrahana Video Guide

Video: Official UltraPro guide demonstrating the direct wire installation process for the LED light fixture, covering all steps from unboxing to final power restoration.

5. Fampandehanana

The UltraPro LED light fixture offers versatile lighting options:

• Ampifamadiho/famonoana: Use the integrated rocker switch on the fixture to turn the light on or off.
• Fantenana ny maripana loko: The fixture features a 3-position switch to select between three color temperatures:
• 2700K (Fotsy Mafana): Provides a soft, cozy ambiance.
• 4000K (Fotsy Mangatsiaka): Offers a bright, neutral white light.
• 5000K (Andro): Delivers a crisp, bright light ideal for task lighting.
• Fandevenana Function: For dimming capabilities, use a compatible in-wall LED dimmer (sold separately).

6. Fikojakojana

To ensure optimal performance and longevity of your LED light fixture:

• Fanadiovana: Disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• Teknolojia LED: The long-life, energy-efficient LED technology eliminates the need for replacement bulbs.

7. Famahana olana

If you experience issues with your UltraPro LED light fixture, refer to the following common solutions:

• Tsy mirehitra ny jiro:
• Jereo ny "circuit breaker" na ny boaty "fuse" mba hahazoana antoka fa misy herinaratra miditra ao amin'ilay fitaovana.
• Verify that the on/off switch on the fixture is in the 'ON' position.
• Ensure all wiring connections are secure and properly installed.
• Jiro na manjavozavo:
• If using a dimmer, ensure it is a compatible LED dimmer. Incompatible dimmers can cause flickering or poor performance.
• Hamarino raha misy fifandraisana tariby tsy misy dikany.
• Tsy mety ny mari-pana loko:
• Adjust the 3-position color temperature switch on the fixture to your desired setting (2700K, 4000K, or 5000K).

If problems persist, consult a qualified electrician or contact customer support.

8. Famaritana

9. Warranty sy fanohanana

antoka: This UltraPro product is backed by a limited lifetime warranty. Please refer to the product packaging or manufacturer's website for full warranty details and terms.

Fanohanana ny mpanjifa: For technical assistance, troubleshooting, or warranty claims, please contact UltraPro customer service. Contact information can typically be found on the product packaging or the official UltraPro website.