Inspire Candy Black 4oz Airbrush (Solvent) Paint User Manual

Sava lalana

Thank you for choosing Inspire Candy Black 4oz Airbrush (Solvent) paint. This high-quality solvent-based paint is designed for airbrush applications, providing a vibrant and durable finish. This manual provides essential information for the proper handling, preparation, application, and maintenance of this product to ensure optimal results and safety.

Information momba ny fiarovana

Always prioritize safety when working with solvent-based paints. Please read and adhere to the following guidelines:

• rivotra: Use in a well-ventilated area or outdoors. Avoid inhaling paint fumes.
• Fitaovana fiarovana manokana (PPE): Wear appropriate PPE, including chemical-resistant gloves, safety glasses, and a respirator suitable for organic vapors.
• Flammability: This product is flammable. Keep away from heat, sparks, open flames, and hot surfaces. No smoking.
• fitahirizana: Store in a cool, dry, well-ventilated place, away from direct sunlight and incompatible materials. Keep container tightly closed when not in use.
• fanariana: Dispose of paint and cleaning materials according to local regulations. Do not pour down drains.
• Vonjy taitra: In case of skin contact, wash thoroughly with soap and water. For eye contact, flush with water for several minutes and seek medical attention. If inhaled, move to fresh air. If swallowed, do not induce vomiting; seek immediate medical attention.

What's in the Bottle

Each 4oz bottle of Inspire Candy Black paint contains the following components:

• High-quality solvent-based candy paint pigment.
• Specialized binders and additives for optimal airbrush performance.

Image: A 4oz bottle of Inspire Candy Black airbrush paint, clearly labeled with the 'Inspire' brand and 'Airbrush Paints'. The bottle is transparent, showing the dark, rich black paint inside.

Fametrahana sy fanomanana

Proper preparation is crucial for achieving the best results with Inspire Candy Black paint.

1. Fiomanana ambonin'ny tany: Ensure the surface to be painted is clean, dry, and free of dust, grease, or contaminants. For best adhesion and color vibrancy, apply a suitable base coat (e.g., silver or black metallic base) before applying the candy paint.
2. Mixing the Paint: Shake the paint bottle thoroughly for at least 2 minutes before use to ensure all pigments and binders are evenly dispersed. The paint should be a consistent color and viscosity.
3. Thinning (if necessary): Inspire Candy paints are typically ready for airbrush use. However, if thinning is required for your specific airbrush setup or desired flow, use a high-quality solvent-based reducer compatible with candy paints. Start with a small amount (e.g., 5-10%) and test the spray pattern.
4. Airbrush Setup: Ensure your airbrush is clean and in good working order. Set your air pressure according to your airbrush manufacturer's recommendations and the desired spray pattern (typically between 20-35 PSI for candy paints).

Operating (Application)

Follow these steps for effective application of Inspire Candy Black paint:

1. Fanandrana fitsapana: Always perform a test spray on a scrap piece of material to check the color, flow, and spray pattern before applying to your final project.
2. Teknika fampiharana: Apply the paint in light, even coats. Candy paints are translucent, and the final color depth is built up through multiple thin layers. Avoid applying thick coats, as this can lead to runs or uneven color.
3. Layering: Allow each coat to flash off (become tacky but not fully dry) before applying the next. This usually takes a few minutes depending on temperature and humidity. Continue applying coats until the desired depth and intensity of black candy effect is achieved.
4. Akanjo mazava: Once the desired candy effect is achieved and the paint is fully dry (refer to product data sheet for specific dry times), it is highly recommended to apply a high-quality clear coat for protection, gloss, and durability.

Image: A bottle of Inspire Candy Black paint positioned next to a small, glossy black model car body, demonstrating the potential finished appearance of the paint.

Sary: akaiky view of the Inspire Candy Black paint, showing its deep, rich black hue with subtle metallic or pearl effects, as if viewed in a paint cap or small container.

fikarakarana

Proper maintenance of your airbrush and paint ensures longevity and consistent performance.

• Fanadiovana amin'ny borosy rivotra: Immediately after use, clean your airbrush thoroughly with a compatible solvent-based airbrush cleaner. Do not allow paint to dry inside the airbrush, as this can cause clogging and damage.
• Fitehirizana tavoahangy: Ensure the paint bottle cap is tightly sealed after each use to prevent solvent evaporation and paint drying. Store the bottle upright in a cool, dry place.
• fiainana talantalana: When stored correctly, Inspire Candy paints have a long shelf life. If the paint appears separated or unusually thick, re-shake vigorously. If it does not return to its original consistency, it may be past its usable life.

Fanamboarana

Olana mahazatra sy ny vahaolana:

• Tsentsina: If your airbrush clogs, it's usually due to insufficient cleaning or paint that is too thick. Clean the airbrush thoroughly, paying attention to the nozzle and needle. Thin the paint slightly if necessary.
• Tsifotra tsy mitovy: This can be caused by improper air pressure, paint viscosity, or a partially clogged airbrush. Adjust air pressure, thin paint, or clean airbrush.
• Runs/Drips: Applying paint too thickly or holding the airbrush too close to the surface can cause runs. Apply thinner coats and maintain a consistent distance.
• Firaikitra ratsy: Ensure the surface is properly cleaned and prepared, and a suitable base coat is used.

fepetra arahana

Warranty sy fanohanana

For specific warranty information or technical support regarding Inspire Candy Black 4oz Airbrush (Solvent) paint, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.

Manufacturer: Inspire

Seller: Custom Paints Inc

For further assistance, you may visit the seller's support page or contact them directly through the platform where the product was purchased.