1. Vokatra mihoatraview
The Flex LBE 17-11 125 is a powerful and high-quality angle grinder designed for cutting, deburring, and grinding tasks. It incorporates advanced features for enhanced performance, safety, and durability.
- Microprocessor Electronics: Features soft start, restart interlock after power failure, overload protection, and constant electronics (CDC) for consistent performance.
- Mechanical Brake: Ensures the tool stops quickly, within 3.5 seconds, for increased safety.
- Anti-Kickback Function: Automatically switches off the motor if the disc jams, preventing dangerous kickback.
- Motera avo lenta: Designed for high load capacity and efficiency, delivering strong power output.
- Optimized Durability: Efficient air ducting and optimized carbon geometry contribute to a long service life.
- Dust Sealing: Sophisticated dust sealing protects the motor and gearbox from abrasive dust.
- Ergonomic Design: Compact and ergonomic form for comfortable handling.
- Tool-Free Guard Adjustment: The protective guard can be adjusted without the need for additional tools.
- SoftVib Handle: Features an integrated patented clamping nut wrench and vibration damping for reduced fatigue.
2. Torolàlana momba ny fiarovana
Always observe general power tool safety warnings and specific instructions for angle grinders. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.
Fiarovana ankapobeny
- Manaova fitaovam-piarovana manokana (PPE) sahaza hatrany, ao anatin'izany ny solomaso fiarovana, ny fiarovan-tena, ny fonon-tanana ary ny saron-tava.
- Ataovy azo antoka fa cl ny workpieceamped alohan'ny fandidiana.
- Keep hands clear of rotating parts and the cutting/grinding area.
- Aza miasa ny fitaovana amin'ny atmosfera mipoaka, toy ny misy ranon-javatra mirehitra, entona, na vovoka.
- Tazony lavitra ny ankizy sy ny olona eo am-piasana rehefa mampiasa fitaovana herinaratra.
Fiarovana elektrika
- Ataovy azo antoka ny famatsiana herinaratra voltage matches the rating on the tool's nameplate.
- Aza manararaotra ny tady. Aza mampiasa na oviana na oviana ny tady amin'ny fitondrana, fisintonana, na fanalana ny fantson-jiro. Atsaharo ny tady amin'ny hafanana, ny menaka, ny sisiny maranitra, na ny zavatra mihetsika.
- Raha mampiasa fitaovana herinaratra amin'ny dokaamp Tsy azo ihodivirana ny toerana, ampiasao ny fitaovana arovana (RCD) famatsiana arovana.
Specific Angle Grinder Safety
- Always use the protective guard. Ensure it is correctly positioned and securely fastened.
- Use only discs that are rated for the maximum speed of the grinder and are suitable for the material being worked on.
- Never use cutting discs for side grinding.
- Be aware of the anti-kickback feature; if the disc jams, the motor will shut off. Release the switch and clear the obstruction before restarting.
- Allow the disc to come to a complete stop using the mechanical brake before setting the tool down.
3. Ny singa sy ny endri-javatra
singa fototra:
- Vatana fototra: Houses the motor, electronics, and gearbox.
- Mpiambina fiarovana (Protective Guard): Adjustable, tool-free guard for user protection.
- SoftVib Handle: Ergonomic side handle with vibration damping and integrated wrench.
- bokotra hidin-trano (Spindle Lock Button): For easy disc changes.
- Slide Switch: Lockable for continuous operation.
- Speed Selection Dial: For variable speed control (see Figure 2).
- Rivotra rivotra: For motor cooling and dust expulsion.
4. Fametrahana
Attaching the SoftVib Handle
The SoftVib handle can be screwed into either the left or right side of the gearbox housing, depending on user preference and application. Ensure it is tightened securely.
Fametrahana ny Fiarovana
The protective guard is tool-free adjustable. Position it to provide maximum protection for your specific task. Ensure it clicks securely into place.
Installing the Grinding/Cutting Disc
- Unplug the tool from the power supply.
- Tsindrio ary hazòny ny bokotra hidin'ny spindle.
- Place the inner clampny flange amin'ny spindle.
- Place the desired 125mm disc onto the inner flange, ensuring it sits flush.
- Vidin'ny clamping nut (M14) and tighten it firmly using the integrated wrench in the SoftVib handle.
- Alefaso ny bokotra hidin'ny spindle.
5. Torolàlana miasa
Mamelona/Efa
- To switch on, push the slide switch forward. For continuous operation, push it further forward until it locks into place.
- To switch off, release the slide switch. If locked, press the rear part of the switch to release it.
Variable Speed Control
The speed selection dial (Figure 2) allows you to adjust the no-load speed between 2800 and 11500 rpm. Select the appropriate speed for the material and application. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for cutting and grinding.
Using the Mechanical Brake
The integrated mechanical brake stops the disc within 3.5 seconds after the tool is switched off. This enhances safety by quickly stopping rotation.
Working with the Grinder
- Tazony mafy amin’ny tanana roa foana ilay fitotoana.
- Allow the tool to reach full operating speed before contacting the workpiece.
- Apply steady, even pressure. Do not force the tool, as this can lead to overheating or disc damage.
- For cutting, use a slight rocking motion to prevent the disc from binding.
- Be mindful of sparks and debris. Direct them away from yourself and others.
6. Fikojakojana
Regular maintenance ensures the longevity and safe operation of your Flex angle grinder.
FANADIOVANA
- Esory foana ny fitaovana alohan'ny hanadiovana.
- Regularly clean the ventilation slots to prevent dust buildup, which can lead to overheating. Use compressed air if available.
- Wipe the exterior of the tool with a damp lamba. Aza mampiasa akora simika mahery vaika na fanadiovana maloto.
Famonoana karbonina
The optimized carbon geometry contributes to long brush life. If the tool's performance significantly drops or sparks excessively, the carbon brushes may need inspection or replacement. This should ideally be done by a qualified service technician.
fitahirizana
Store the angle grinder in a dry, secure place, out of reach of children and unauthorized users.
7. Famahana olana
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| Tsy manomboka ny fitaovana | Tsy misy famatsiana herinaratra Restart interlock activated (after power failure) Tady herinaratra simba | Jereo ny fampifandraisana herinaratra Unplug and re-plug the tool Inspect cord for damage; replace if necessary (by qualified personnel) |
| Mijanona mandritra ny fiasan'ny fitaovana | Navitrika ny fiarovana be loatra Disc jammed (anti-kickback activated) | Reduce pressure; allow tool to cool Release switch, clear obstruction, then restart |
| Vibration tafahoatra | Worn or damaged disc Kapila tsy voapetraka tsara Tantana malalaka | Soloy kapila Re-mount disc correctly, ensure clamping nut is tight Tighten SoftVib handle |
| Reduced performance / Excessive sparking | Borosy karbaona efa lany Dust buildup in vents | Have brushes inspected/replaced by service center Diovy tsara ireo lavaka fivoahan'ny rivotra |
8. Famaritana
| toetra | sarobidy |
|---|---|
| Laharana modely | 447668 |
| Fampidirana herinaratra | 1700 W |
| Famoahana herinaratra | 1050 W |
| BOKYtage | 230 V |
| hatetika | 50/60 Hz |
| Max. Savaivony kapila | 125 mm |
| Haingana tsy misy entana | 2800-11500 rpm |
| Tool Holder (Angle Grinder) | M14 |
| Ny halavan'ny tariby | 4 m |
| refy (L x W x H) | 340 x 77 x 105 mm |
| lanja | 2.6 kg |
| loko | Mena, Mainty, Volafotsy |
| KEVITRA | Metal |
9. Warranty sy fanohanana
Specific warranty details for this product may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for precise information.
Regarding spare parts availability, information is currently unavailable. For technical support, service, or inquiries about replacement parts, please contact Flex customer service or an authorized Flex service center in your region. Contact details can typically be found on the official Flex webtoerana na eo amin'ny fonosan'ny vokatrao.
