1. Fampidirana
This manual provides essential information for the installation, operation, and maintenance of the BANNER ENGINEERING S18AW3FF50 EZ-Beam S18 Series Photoelectric Sensor. This sensor is designed for reliable object detection in industrial environments, featuring a 50 mm range, 20-250VAC input, and SPST solid-state light operate output.
Figure 1: BANNER ENGINEERING S18AW3FF50 Photoelectric Sensor with coiled cable.
2. Fametrahana sy fametrahana
Proper installation is crucial for optimal performance and safety. Follow these steps carefully.
2.1 Famoahana sy fisafoana
- Carefully remove the sensor from its packaging.
- Inspect the sensor for any visible damage that may have occurred during shipping.
- Hamarino tsara fa eo daholo ireo singa rehetra voatanisa ao amin'ny taratasy famenoana.
2.2 Fametrahana ny Sensor
The S18AW3FF50 sensor is designed for easy mounting. Ensure the mounting surface is stable and free from excessive vibration.
- Select a mounting location that provides clear line-of-sight for the sensor's detection range (50 mm).
- Secure the sensor using appropriate mounting hardware (not included). The sensor features a threaded barrel for secure attachment.
- Ensure the sensor is oriented correctly for the intended detection application.
Sary 2: lafiny view of the S18AW3FF50 sensor, showing the threaded barrel and cable.
2.3 Fifandraisana elektrika
FAMPITANDREMANA: Disconnect all power before making electrical connections to prevent electric shock or damage to the equipment.
The S18AW3FF50 operates on 20-250VAC input and provides an SPST Solid-State Light Operate output. The sensor comes with a 2M (6.5FT) cable.
| Loko tariby | asa |
|---|---|
| Brown | AC Line (L1) |
| Manga | AC Neutral (L2) |
| Mainty | Output (SPST Light Operate) |
Connect the sensor wires to the control circuit according to the provided wiring diagram and local electrical codes. Ensure all connections are secure.
Figure 3: S18AW3FF50 sensor showing the cable with exposed wires for electrical connection.
3. Fampandehanana
Once installed and wired, the S18AW3FF50 sensor is ready for operation.
3.1 Mamelona
Apply power to the sensor (20-250VAC). The sensor will typically have an indicator LED (if present) to show power status and output state.
3.2 Detection Principle
The S18AW3FF50 is a photoelectric sensor operating in a fixed field mode. It emits a light beam and detects objects based on the reflection or interruption of this beam. The "Light Operate" output means the output will be active when light is received by the sensor (i.e., when an object is detected or not detected, depending on the specific fixed field configuration).
3.3 Range and Performance
The sensor has a specified detection range of 50 mm. Ensure that objects to be detected fall within this range for reliable operation. Environmental factors such as dust, moisture, and ambient light can affect performance.
4. Fikojakojana
The S18AW3FF50 sensor is designed for low maintenance. Regular checks can ensure long-term reliable operation.
4.1 Fanadiovana
- Periodically clean the sensor lens and housing to remove dust, dirt, or debris that may accumulate and interfere with detection.
- Use a soft, lint-free cloth and a mild cleaning solution if necessary. Avoid abrasive cleaners or solvents.
4.2 Fanaraha-maso ny tariby sy ny fifandraisana
- Regularly inspect the sensor cable for any signs of wear, cuts, or damage.
- Check electrical connections to ensure they remain secure and free from corrosion.
5. Famahana olana
This section provides solutions to common issues encountered with the S18AW3FF50 sensor.
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| Sensor not powering on | No power supply; Incorrect wiring; Damaged sensor. | Verify power supply (20-250VAC); Check wiring against Table 1; Replace sensor if damaged. |
| Sensor not detecting objects | Object out of range (50 mm); Dirty lens; Misalignment; Ambient light interference. | Ensure object is within 50 mm range; Clean sensor lens; Realign sensor; Shield sensor from strong ambient light. |
| Fitihana mihelina | Vibration; Loose connections; Fluctuating power. | Secure sensor mounting; Check all electrical connections; Ensure stable power supply. |
6. Famaritana
Key technical specifications for the BANNER ENGINEERING S18AW3FF50 Photoelectric Sensor.
- Modely: Sary S18AW3FF50
- Andiany: EZ-Beam S18 Series
- Saro-pantarina: 50 mm
- Fampidirana Voltage: 20-250VAC
- Karazana vokatra: SPST Solid-State Light Operate
- Halavan'ny tariby: 2M (6.5FT)
- Karazana sensor: Photoelectric, Fixed Field
- Mpanamboatra: BANNER ENGINEERING
- ASIN: B07RZTBRLS
- Daty misy voalohany: 3 Desambra 2021
7. Warranty sy fanohanana
For warranty information and technical support, please contact BANNER ENGINEERING directly or refer to their official website.
Politika famerenana: The product may be subject to a return policy of 30 days for refund/replacement, as per the seller's terms.
Mpanamboatra: BANNER ENGINEERING
Raha mila fanampiana fanampiny dia tsidiho ny BANNER ENGINEERING official webtoerana.