Sava lalana
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Z-Lite 6 Light Chandelier, model 6010-24HB, in Heirloom Brass finish. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Image: The Z-Lite 6 Light Chandelier 6010-24HB in Heirloom Brass finish, showcasing its design and crystal accents.
Information momba ny fiarovana
FAMPITANDREMANA: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. Consult a qualified electrician if you are unsure about wiring procedures.
- Ataovy izay hahazoana antoka fa mifanaraka amin'ny fehezan-dalàna sy didim-panjakana eo an-toerana, ary koa ny Fehezan-dalàna Nasionaly momba ny Herinaratra (NEC) ny fifandraisana elektrika rehetra.
- Ampiasao ihany ny karazana takamoa voatondro sy wattage. Exceeding the maximum wattagmety hiteraka hafanana be loatra sy fahasimbana amin'ny fitaovana e.
- Do not install this fixture on a sloped ceiling without appropriate adapter hardware (sold separately).
- Tandremo tsara ireo singa fitaratra mba tsy ho vaky.
- Arovy ny fitaovana mora mirehitra amin'ny jiro.
Fonosana fonosana
Verify that all components are present before discarding packaging materials. If any parts are missing or damaged, contact Z-Lite customer support.
- Chandelier Frame Assembly
- Mounting Plate / Crossbar
- elom
- Downrods (various lengths)
- Wire Nuts / Connectors
- Decorative Nuts / Screws
- Crystal Accents (pre-attached or separate)
- Boky torolalana
Fitaovana ilaina amin'ny fametrahana
- Phillips Head Screwdriver
- Screwdriver Flat Head
- Wire Strippers
- pliers
- Tape elektrika
- tohatra
- BOKYtage Tester (soso-kevitra)
Fametrahana sy fametrahana
Follow these steps carefully to install your chandelier. It is recommended to have two people for installation due to the size and weight of the fixture.
Dingana 1: Vonoy ny Power
Locate the circuit breaker or fuse box that controls the power to the light fixture location. Turn off the power completely before proceeding with any electrical work. Verify power is off using a voltage tester.
Step 2: Prepare Mounting
Carefully unpack all components. Attach the mounting plate/crossbar to the junction box in the ceiling using the provided screws. Ensure it is securely fastened.
Image: Technical line drawing illustrating the chandelier's dimensions (23 1/2" diameter, 9 5/8" height) and general mounting structure.
Step 3: Assemble Downrods
Determine the desired hanging height for your chandelier. Connect the appropriate downrods together and thread the fixture wires through them. Securely attach the downrod assembly to the top of the chandelier frame.
Dingana 4: Wiring Connections
With the power off, connect the fixture wires to the house wires:
- Connect ny mainty (or smooth) fixture wire to the mainty (hot) house wire using a wire nut.
- Connect ny fotsy (or ribbed) fixture wire to the fotsy (neutral) house wire using a wire nut.
- Connect ny varahina miboridana tariby (tany) mankany amin'ny varahina maitso na miboridana (ground) house wire, and to the ground screw on the mounting plate.
Ensure all connections are secure and covered with wire nuts. Wrap electrical tape around wire nuts for added security.
Step 5: Mount Fixture and Canopy
Carefully lift the chandelier and align the downrod with the mounting plate. Secure the canopy to the mounting plate using the decorative nuts or screws provided, ensuring all wires are tucked neatly inside the junction box.
Image: The Z-Lite 6 Light Chandelier 6010-24HB in Heirloom Brass, fully assembled and ready for bulb installation.
Dingana 6: Mametraka Bulbs
Screw in the appropriate light bulbs (not included) into the sockets. Refer to the specifications section for recommended bulb type and maximum wattage. Aza mihoatra ny wat ambony indrindratage.
Torolàlana miasa
Once installation is complete and verified, restore power at the circuit breaker. The chandelier can now be operated using your wall switch. For optimal performance and longevity, use high-quality, dimmable LED bulbs if connected to a dimmer switch.
fikarakarana
FANADIOVANA
To clean the fixture, ensure power is off and the fixture is cool. Wipe with a soft, dry cloth. Do not use abrasive cleaners, polishes, or solvents as they may damage the finish or crystals. For crystal components, a mild glass cleaner can be applied to a soft cloth, then gently wiped.
Fanoloana takamoa
Always turn off power at the circuit breaker and allow bulbs to cool before replacing. Unscrew the old bulb and screw in a new one of the same type and wattage. Aza mihoatra ny wat ambony indrindratage voafaritra.
Fanamboarana
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| Tsy mirehitra ny fixture |
|
|
| Jiro mitsilopilopy |
|
|
| Mitabataba |
|
|
fepetra arahana
- Modely: 6010-24HB
- marika: Z-Lite
- vita: Heirloom Brass
- Fitaovana: Fiara vy
- Style: ANKEHITRINY
- Fomba fanamboarana jiro: Chandelier amin'ny valindrihana
- Isan'ny jiro: 6
- refy: Approximately 23.5 inches (Diameter) x 9.625 inches (Height)
- Karazana takamoa: E12 Candelabra (Bulbs not included)
- Max Wattage isaky ny takamoa: 60W (or as specified on fixture label)
- BOKYtage: 120V
- Certifications: ETL/CETL voamarina
Warranty sy fanohanana
Z-Lite products are manufactured to high standards and are backed by a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your product or visit the official Z-Lite website. Please have your model number (6010-24HB) and purchase date available when contacting support.
Antsipiriany ifandraisana: Tsidiho azafady www.z-lite.com for customer service and support resources.
