HILTI 282140 Side Handle Instruction Manual for DC 125-S/AG 125-S/SE Tools

1. Vokatra mihoatraview

This manual provides essential information for the safe and effective use of the HILTI 282140 Side Handle. This accessory is designed to enhance control and stability when operating compatible HILTI DC 125-S, AG 125-S, and SE series cutting, sawing, and grinding tools. Proper installation and use are crucial for operator safety and optimal tool performance.

Sary 1: HILTI 282140 Side Handle. This image shows the metallic side handle, designed for ergonomic grip and secure attachment to HILTI power tools.

2. Torolàlana momba ny fiarovana

Always adhere to the safety guidelines provided in the main instruction manual of your HILTI power tool (DC 125-S, AG 125-S, or SE). The side handle is an accessory and does not replace the need for general power tool safety practices.

Vakio ny toromarika rehetra: Before using the side handle, read and understand all instructions in this manual and the power tool's manual.
Secure attachment: Ensure the side handle is securely fastened to the tool before operation. A loose handle can lead to loss of control and injury.
Tazony mafy ny fitanana: Always maintain a firm, two-handed grip on the power tool, utilizing the side handle for maximum control.
Jereo alohan'ny fampiasana: Before each use, inspect the side handle for any damage, cracks, or wear. Do not use a damaged handle.
Ataovy madio tsara ny tanana: Ensure hands are kept clear of rotating or moving parts of the power tool during operation.

3. Ny votoatin'ny fonosana

Hamarino fa misy ny singa rehetra rehefa voavaha:

HILTI 282140 Side Handle (1 unit)

4. Fametrahana sy fametrahana

The HILTI 282140 Side Handle is designed for easy attachment to compatible HILTI power tools.

Identify the mounting point: Locate the threaded mounting hole on the side of your HILTI DC 125-S, AG 125-S, or SE tool. This is typically near the gear housing.
Thread the handle: Align the threaded end of the side handle with the mounting hole. Carefully thread the handle into the hole by turning it clockwise.
Tighten securely: Hand-tighten the side handle firmly until it is secure. Do not overtighten, but ensure there is no play or looseness. The handle should be stable and not rotate freely.
Check position: Adjust the handle's angle if necessary to achieve a comfortable and secure grip for your intended application. Ensure it does not obstruct ventilation or operational controls.

Fanamarihana: Always ensure the power tool is disconnected from its power source before attaching or detaching the side handle.

5. Torolàlana miasa

The side handle provides an additional point of contact for improved control and reduced operator fatigue during cutting, sawing, and grinding tasks.

Fampandehanana tanana roa: Always operate the power tool with both hands, one on the main grip and the other firmly on the HILTI 282140 Side Handle.
Maintain balance: Use the side handle to maintain balance and apply even pressure during operation, especially when working on uneven surfaces or in awkward positions.
Control kickback: A firm grip on the side handle can help mitigate the effects of kickback, providing better control over the tool.
Ergonomika: Position the side handle to allow for a natural and comfortable wrist position, reducing strain during prolonged use.

6. Fikojakojana

Regular maintenance ensures the longevity and safe operation of your HILTI 282140 Side Handle.

Fanadiovana: Fafao madio amin'ny doka ny tahonyamp cloth after each use to remove dust, debris, and grime. Avoid using harsh chemicals or solvents that could damage the material.
Fanaraha-maso: Periodically inspect the handle for any signs of wear, cracks, deformation, or damage to the threads.
fitahirizana: Store the side handle in a clean, dry place, away from direct sunlight and extreme temperatures, when not in use.

7. Famahana olana

If you encounter issues with your HILTI 282140 Side Handle, refer to the following common problems and solutions:

OLANA	Antony mety hitranga	vahaolana
Side handle feels loose or wobbly.	Handle not tightened sufficiently.	Ensure the handle is securely hand-tightened into the tool's mounting point.
Handle cannot be threaded into the tool.	Incorrect alignment or damaged threads.	Check for proper alignment. Inspect threads on both the handle and the tool for damage. Do not force. If threads are damaged, contact HILTI service.
Tsy mahazo aina mandritra ny fampiasana.	Improper handle position.	Adjust the handle's angle to a more ergonomic position that suits your grip and task.

8. Famaritana

Laharana modely: 282140
marika: HILTI
Fitaovana: Metal, Stainless vy
Lanja entana: Tokony ho 7 ounces (198 grama)
Fametrahana tantana/Lever: sisiny
Fampiasana manokana: Tool Handle for cutting, sawing, grinding applications
mifanentana: HILTI DC 125-S, AG 125-S, SE series tools

9. Warranty sy fanohanana

HILTI products are manufactured to the highest quality standards. For information regarding warranty coverage, service, or technical support for your HILTI 282140 Side Handle or compatible HILTI tools, please refer to the official HILTI website or contact your local HILTI representative.

HILTI Customer Service: Tsidiho azafady www.hilti.com for contact information and support resources in your region.

	Hilti DC-EX 125/5"M Slitting Hood - Operating Instructions Official operating instructions for the Hilti DC-EX 125/5"M slitting hood. This accessory is designed for professional use with angle grinders for cutting and slitting mineral materials like masonry, integrating with dust extractors for efficient operation.
	Hilti DCG 125-S/DAG 125-S/DAG 125-SE Angle Grinder Operating Instructions Official operating instructions and safety guide for the Hilti DCG 125-S, DAG 125-S, and DAG 125-SE angle grinders. Covers usage, safety, maintenance, troubleshooting, and technical specifications.
	HILTI AG 500-11S 05 Operating Instructions Operating instructions and safety manual for the HILTI AG 500-11S 05 angle grinder, covering safe handling, proper usage, maintenance, and technical specifications for professional use.
	Hilti AG 125-19SE Angle Grinder Operating Instructions and Safety Manual Comprehensive operating instructions and safety manual for the Hilti AG 125-19SE angle grinder. This document provides essential safety guidelines, operational procedures, maintenance advice, technical specifications, and troubleshooting information for professional use.
	HILTI AG 6D-22-125 Fitotoana Angle Tsy Misy Tariby: Torolàlana Fampiasana sy Torolàlana momba ny Fiarovana Torolàlana amin'ny antsipiriany momba ny fampiasana sy ny fiarovana feno ho an'ny fikosoham-bary tsy misy tariby HILTI AG 6D-22-125. Ity boky torolalana ity dia natao ho an'ny mpampiasa matihanina ary mirakitra ny endriky ny vokatra, ny fampiasana ary ny fikojakojana.
	Hilti DST 20-CA Electric Wall Saw: Original Operating Instructions This document provides comprehensive operating instructions for the Hilti DST 20-CA electric wall saw. It details safety precautions, assembly procedures, operational guidelines, technical specifications, and maintenance requirements for professional users.

HILTI 282140