Sava lalana
Thank you for choosing the AREBOS 2-in-1 Mechanic's Creeper and Seat. This versatile tool is designed to provide comfort and mobility for various tasks in your workshop or garage. Please read this manual thoroughly before use to ensure safe and efficient operation.
Torolàlana fiarovana
- Always ensure the creeper/seat is on a flat, stable surface before use.
- Do not exceed the maximum load capacity: 150 kg (330 lbs) as a creeper, 120 kg (264 lbs) as a seat.
- Keep hands and fingers clear of moving parts during conversion between creeper and seat modes.
- Inspect the product for any damage or loose parts before each use. Do not use if damaged.
- Ensure all wheels are securely attached and functioning correctly.
- Use the parking brakes on the wheels when stability is required, especially when using as a seat.
- This product is intended for workshop use. Do not use for purposes other than its intended design.
- Arovy ny ankizy sy ny biby fiompy lavitra ny toeram-piasana.
Component Overview
The AREBOS 2-in-1 Mechanic's Creeper and Seat consists of the following main components:
- Rafitra vy: Provides structural integrity and durability.
- Padded Cushions: For comfort in both creeper and seat configurations.
- Swivel Casters (6x): 360-degree rotating wheels for easy maneuverability.
- Locking Pins/Mechanisms: For securing the creeper in either the flat (creeper) or folded (seat) position.
Image: The AREBOS 2-in-1 Mechanic's Creeper and Seat shown in both its flat creeper mode and folded seat mode, illustrating its dual functionality.
Setup sy Assembly
The AREBOS 2-in-1 Creeper and Seat typically comes pre-assembled or requires minimal setup. Follow these steps:
- Famoahana: Esory tsara ao anaty fonosana ny singa rehetra. Jereo raha misy fahasimbana amin'ny fandefasana entana.
- Fametrahana kodiarana (raha ilaina): If the wheels are not pre-installed, attach the six swivel casters to the designated points on the frame. Ensure they are securely fastened.
- Fanaraha-maso voalohany: Before first use, verify that all bolts, nuts, and pins are tight and secure. Ensure the frame is stable and there are no loose parts.
Image: A mechanic positioned under a vehicle, utilizing the AREBOS creeper for comfortable access during repairs.
Torolàlana miasa
Converting from Creeper to Seat
- Ensure the creeper is on a flat, stable surface.
- Locate the locking pins or release mechanism on the frame, typically near the hinge points.
- Carefully disengage the locking mechanism.
- Gently lift the headrest section of the creeper upwards. The frame will begin to fold into a seat configuration.
- Continue folding until the seat position is fully engaged and the locking mechanism clicks into place, securing the seat. Verify it is stable before sitting.
Image: The AREBOS creeper transformed into a seat, demonstrating its robust design and capacity to support weight.
Converting from Seat to Creeper
- Ensure the seat is on a flat, stable surface.
- Locate and disengage the locking mechanism that holds the seat in its upright position.
- Carefully lower the backrest section until the creeper is fully flat.
- Ensure the locking pins are engaged to secure the creeper in the flat position.
Sary: A antsipirihany view of a hand engaging a locking pin on the creeper's steel frame, illustrating the mechanism for securing its position.
Using the Swivel Casters
The six 360-degree swivel casters allow for easy movement in any direction. Some casters may include a parking brake for added stability.
- To move the creeper/seat, simply push it in the desired direction.
- To lock the position, engage the parking brake on the relevant casters by pressing down the lever.
- To unlock, lift the lever.
Sary: A antsipirihany view of a 360-degree swivel wheel on the AREBOS creeper, showing the parking brake mechanism.
Fikojakojana sy fikarakarana
- Fanadiovana: Wipe down the padded surfaces and frame with a damp lamba. Fadio ny zavatra simika mahery vaika mety hanimba ny fitaovana.
- fanosorana: Periodically apply a small amount of lubricant to the swivel caster bearings and hinge points to ensure smooth operation.
- Fanamarinana fasteners: Regularly check all bolts, nuts, and locking pins for tightness. Tighten any loose fasteners to maintain structural integrity.
- fitahirizana: Store the creeper/seat in a dry, clean environment when not in use. It can be stored in its compact seat configuration to save space.
Fanamboarana
| OLANA | Antony mety hitranga | vahaolana |
|---|---|---|
| Difficulty converting between modes. | Locking pins are stuck or hinges are stiff. | Apply lubricant to hinge points and locking mechanisms. Ensure no debris is obstructing movement. |
| Creeper/Seat feels unstable. | Loose fasteners or damaged frame/wheels. | Check and tighten all bolts and nuts. Inspect frame and wheels for damage. Do not use if severely damaged. |
| Wheels do not swivel smoothly. | Dirt/debris in bearings or lack of lubrication. | Clean wheels and bearings. Apply lubricant to swivel points. |
| Parking brake not holding. | Brake mechanism worn or misaligned. | Inspect the brake mechanism. If worn, consider replacing the caster. |
Famaritana ara-teknika
| endri-javatra | antsipirihany |
|---|---|
| MODELY | AR-HE-RM150 |
| Marika | Arebos |
| Type | 2-in-1 Mechanic's Creeper and Seat |
| Max. Load Capacity (Creeper) | 150 kg (330 lbs) |
| Max. Load Capacity (Seat) | 120 kg (264 lbs) |
| Dimensions (Creeper L x W x H) | 92 x 44 x 12 sm (eo ho eo amin'ny 36.2 x 17.3 x 4.7 santimetatra eo ho eo) |
| Dimensions (Seat H x W x D) | Approx. 45 cm height (17.7 inches), 44 cm width (17.3 inches), 38 cm depth (15 inches) |
| lanja | 5.3 kg (11.7 lbs) |
| Kodiarana | 6x 360° Swivel Casters |
| Fitaovana Frame | vy mifono |
Image: A diagram illustrating the key dimensions of the AREBOS 2-in-1 Creeper and Seat in both its flat and folded states.
Warranty sy fanohanana
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official AREBOS website. Tehirizo ny porofon'ny fividiananao raha misy fitakiana fiantohana.
