Makita 18V LXT Brushless 5" Angle Grinder DGA517Z Instruction Manual

Sava lalana

This manual provides essential information for the safe and effective operation, setup, and maintenance of your Makita 18V LXT Brushless 5" Angle Grinder, model DGA517Z. This tool is designed for grinding, cutting, and sanding various materials. Please read this manual thoroughly before using the tool to ensure proper handling and to prevent injury or damage.

Figure 1: Makita 18V LXT Brushless 5" Angle Grinder DGA517Z. This image shows the complete tool with a battery attached and the side handle installed.

Information momba ny fiarovana

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Keep this instruction manual for future reference.

• Fiarovana ny faritra fiasana: Ataovy madio sy mazava tsara ny toeram-piasana. Ny faritra mikorontana na maizina dia miteraka loza. Aza mampiasa fitaovam-pamokarana amin'ny atmosfera mipoaka, toy ny fisian'ny ranon-javatra mirehitra, entona, na vovoka.
• Fiarovana herinaratra: Tsy maintsy mifanandrify amin'ny fivoahana ny plugs amin'ny fitaovana herinaratra. Aza ovaina na oviana na oviana ny plug. Aza mifandray amin'ny vatana amin'ny tany na tany.
• Fiarovana manokana: Always wear eye protection, hearing protection, and appropriate respiratory protection. Use safety footwear and gloves when necessary. Stay alert, watch what you are doing, and use common sense when operating a power tool.
• Fitaovana fampiasana sy fikarakarana: Aza terena ny fitaovana herinaratra. Ampiasao ny fitaovam-pamokarana marina ho an'ny fampiharanao. Esory ny fonon'ny bateria amin'ny fitaovana herinaratra alohan'ny hanaovana fanitsiana, fanovana kojakoja, na fitahirizana fitaovana herinaratra.
• Fiarovana ny bateria: Use only genuine Makita batteries. Using non-genuine batteries can lead to fire, personal injury, or property damage, and voids the product warranty.

Figure 2: Warning regarding the use of non-genuine Makita Lithium-Ion batteries. Using unauthorized batteries can pose safety risks and void your warranty.

Hametraka

1. Fametrahana sy fanesorana ny bateria

To install the battery, align the battery pack with the housing and slide it in until it locks into place. To remove, press the release button on the battery and slide it out.

Sary 3: aoriana view of the grinder, illustrating the battery insertion point. Ensure the battery is fully seated and locked.

2. Fametrahana ny sisiny

The side handle can be screwed into either side of the gear housing for left or right-handed operation. Ensure it is tightened securely before use.

Sary 4: lafiny view of the grinder with the auxiliary side handle attached. The handle provides additional control and stability during operation.

3. Fanitsiana ny Fiarovana ny Kodiarana

The tool features a toolless wheel cover (part number 123145-8) for quick adjustment. Loosen the clamp lever, rotate the guard to the desired position to protect against sparks and debris, and then tighten the lever firmly.

4. Installing Grinding/Cutting Wheels

To install a wheel, first ensure the tool is off and the battery is removed. Press the spindle lock button to prevent the spindle from rotating. Place the inner flange onto the spindle, then position the grinding or cutting wheel (e.g., 5" Depressed Centre Wheel D-20797) onto the inner flange. Secure it with the lock nut and tighten it firmly using the provided lock nut wrench (part number 782424-9).

Sary 5: Eo anoloana view of the grinder, highlighting the installed grinding wheel and adjustable guard. Always ensure the wheel is correctly mounted and secured.

Torolàlana miasa

1. Powering On and Off (Paddle Switch)

This grinder is equipped with a two-stage safety paddle switch to prevent accidental start-up. To start the tool, first slide the lock-off lever forward, then depress the paddle switch. To stop, simply release the paddle switch.

Figure 6: Close-up of the paddle switch and lock-off lever. The lever must be engaged before the paddle switch can be depressed to start the tool.

Figure 7: A hand demonstrating the proper grip and activation of the paddle switch for operation.

2. Fanitsiana hafainganam-pandeha miovaova

The variable speed dial allows for RPM adjustment from 3,000 to 8,500. Rotate the dial to select the appropriate speed for your application. Lower speeds are suitable for polishing or delicate work, while higher speeds are for aggressive grinding or cutting.

Figure 8: Detail of the variable speed dial, allowing users to select RPM settings from 1 to 5.

Figure 9: A chart on the tool body correlating dial settings (1-5) with their respective RPM ranges, from 3,000 to 8,500 min⁻¹.

3. Active Feedback Sensing Technology (AFT) and Automatic Torque Drive Technology (ADT)

This tool incorporates advanced safety and performance features:

• Active Feedback Sensing Technology (AFT): Automatically shuts down the tool if there is a sudden drop in rotation speed, such as during a kick-back event, enhancing user safety.
• Automatic Torque Drive Technology (ADT): Adjusts speed and torque automatically during operation for optimal performance based on the load, ensuring efficient material removal.

4. Brake elektrika

The integrated electric brake stops the grinding or cut-off wheel in 2 seconds or less after the paddle switch is released, contributing to increased productivity and safety.

5. Tondro fiampangana bateria

The tool features a battery charge indicator to monitor the remaining battery life. Refer to the indicator lights to determine when recharging is necessary.

Figure 10: The battery charge indicator, showing three red bars and a green circle, indicating the battery's power level.

6. Fampiasana ankapobeny

Hold the tool firmly with both hands. Apply even pressure and allow the tool to do the work. Avoid excessive force, which can lead to kick-back or damage to the workpiece or tool. Always ensure proper ventilation and clear the work area of bystanders.

Figure 11: The angle grinder actively cutting a metal piece, generating sparks. Proper safety gear, including gloves and eye protection, is visible.

Figure 12: The angle grinder being used to cut a metal pipe, demonstrating its application in pipework. Sparks are visible during the cutting process.

fikarakarana

1. Fanadiovana

Regularly clean the tool's ventilation openings to prevent overheating. Use a soft cloth to wipe down the exterior. Do not use harsh chemicals or abrasive cleaners.

2. Brushless Motor

The brushless motor design eliminates the need for carbon brush replacement, reducing maintenance requirements and increasing motor lifespan.

3. Fikarakarana bateria

Store batteries in a cool, dry place away from direct sunlight. Do not expose batteries to water or extreme temperatures. Follow the charging instructions provided with your Makita charger.

4. eXtreme Protection Technology (XPT)

The tool features XPT, which provides enhanced protection against dust, debris, and liquids. While XPT improves durability, it does not make the tool waterproof. Avoid exposing the tool to excessive moisture.

Fanamboarana

• Tsy manomboka ny fitaovana: Ensure the battery is fully charged and properly inserted. Check that the paddle switch lock-off lever is fully engaged before depressing the paddle switch.
• Tool Stops During Operation: This may indicate activation of the Active Feedback Sensing Technology (AFT) due to a sudden drop in rotation speed (e.g., kick-back). Release the paddle switch, clear any obstruction, and restart the tool. If the issue persists, check the wheel for damage or excessive wear.
• Fahombiazana mihena: Ensure the battery is fully charged. Check the grinding/cutting wheel for wear or damage and replace if necessary. Verify that the correct speed setting is selected for the application.
• Fihovitrovitra be loatra: Check if the grinding wheel is properly installed and balanced. Replace any damaged or unbalanced wheels. Ensure the side handle is securely tightened.

fepetra arahana

Figure 13: Dimensional diagram of the Makita DGA517Z angle grinder, showing length, width, and height measurements.

Garantie

The Makita 18V LXT Brushless 5" Angle Grinder DGA517Z comes with a Garantie mpanamboatra 3 taona voafetra. Please refer to the official Makita warranty documentation for full terms and conditions. Keep your proof of purchase for warranty claims.

MANAMPY

For further assistance, technical support, or to locate an authorized service center, please visit the official Makita website or contact Makita customer service. You can find more information at the Makita Store on Amazon or directly through Makita's corporate website.