Victrola V50-500 Surround Alarm Clock Instruction Manual

Sava lalana

Misaotra anao nividyasing the Victrola V50-500 Surround Alarm Clock. This manual provides essential information for setting up, operating, and maintaining your new alarm clock. Please read these instructions carefully before use and retain them for future reference.

Figure 1: Victrola V50-500 Surround Alarm Clock. This image displays the alarm clock's front, highlighting its large blue digital display and classic chrome twin bell design.

Lafin-javatra fototra:

• Retro Twin Bell Style: Classic design with functional twin bells.
• High Gloss Chrome Finish: Maharitra sady mahafinaritra ny masoasing chrome exterior.
• Large Bright Blue Digital Display LED: Fampisehoana ora mazava sy mora vakiana.
• Famantaranandro fanairana: Reliable alarm for daily use.

Hametraka

1. Famoahana: Carefully remove the alarm clock from its packaging. Ensure all components are present.
2. Fampifandraisana herinaratra: Connect the power adapter (not specified if included, assuming it is or uses standard batteries) to the alarm clock and then to a standard electrical outlet. The digital display should illuminate.
3. Fametrahana ny ora:
   • Locate the "Time Set" button or dial, usually on the back or bottom of the unit.
   • Press and hold the "Time Set" button until the hour digits begin to flash.
   • Use the "Hour" and "Minute" adjustment buttons (often labeled + and - or dedicated buttons) to set the current time. Pay attention to AM/PM indicators if present.
   • Press "Time Set" again to confirm and exit time setting mode.
4. Fametrahana ny fanairana:
   • Locate the "Alarm Set" button or dial.
   • Press and hold the "Alarm Set" button until the alarm hour digits begin to flash.
   • Use the "Hour" and "Minute" adjustment buttons to set your desired alarm time.
   • Press "Alarm Set" again to confirm.
   • Ensure the alarm is activated using the "Alarm ON/OFF" switch or button. An indicator light (e.g., a bell icon) should appear on the display.

Torolàlana miasa

Fampiasa fanairana:

• When the alarm sounds, press the "Snooze" button (usually a large button on top) to temporarily silence the alarm for a few minutes (typically 5-9 minutes). The alarm will sound again after the snooze period.
• To turn off the alarm completely for the day, press the "Alarm OFF" or "Power" button. The alarm will reset for the next day at the set time.
• To disable the alarm function entirely, use the "Alarm ON/OFF" switch or button until the alarm indicator disappears from the display.

Famirapiratry ny fampisehoana:

Some models may feature adjustable display brightness. Look for a "Dimmer" or "Brightness" button, often located on the back or side of the unit, to cycle through different brightness levels.

fikarakarana

• Fanadiovana: Wipe the alarm clock with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.
• Fametrahana: Place the alarm clock on a stable, flat surface away from direct sunlight, heat sources, and excessive moisture.
• Battery Backup (if applicable): If your model includes a battery backup compartment (for time retention during power outages), ensure batteries are replaced periodically (e.g., annually) to maintain functionality. The product specifications state "Are batteries included? No", implying it might be AC powered primarily, but a backup battery slot is common. Check your unit for a battery compartment.

Fanamboarana

fepetra arahana

Warranty sy fanohanana

Victrola products are manufactured with high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Victrola website. If you encounter any issues not covered in this manual, please contact Victrola customer support for assistance.

Victrola Official Webtranokala: www.victrola.com