Project Source 11-Inch Flush Mount Light User Manual

Sava lalana

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Project Source 11-Inch Flush Mount Light fixture. Please read this manual thoroughly before beginning installation and retain it for future reference. This product is designed for indoor use only.

Information momba ny fiarovana

WARNING: Risk of Electric Shock. Disconnect power at the fuse or circuit breaker before installing or servicing.

• Ny fifandraisana elektrika rehetra dia tsy maintsy mifanaraka amin'ny fehezan-dalàna eo an-toerana, ny didim-panjakana, na ny Fehezan-dalàna Nasionaly momba ny Herinaratra (NEC).
• Miresaha amin'ny elektrisianina mahafeno fepetra raha tsy azonao antoka ny fizotran'ny fametrahana.
• Aza apetraka amin'ny toerana mando na mando ity fitaovana ity.amp toerana.
• Ensure all wires are properly connected and secured to prevent short circuits.
• Aza mihoatra ny wat ambony indrindratage specified for this fixture.
• Tandremo tsara ireo singa fitaratra mba tsy ho vaky.

Fonosana fonosana

Hamarino fa misy ny singa rehetra alohan'ny hanombohan'ny fametrahana:

• Project Source 11-Inch Flush Mount Light Fixture (2 units)
• Mounting Hardware Kit (screws, wire nuts)
• Boky torolàlana (torolàlana ity)

Image: The retail packaging box for the Project Source 11-Inch Flush Mount Light. The box is white with green accents, featuring an image of the light fixture and "PROJECT SOURCE" branding.

Fametrahana sy fametrahana

Fitaovana ilaina (tsy tafiditra):

• Phillips Head Screwdriver
• Wire Strippers
• Tape elektrika (tsy voatery)
• Solomaso fiarovana

Dingana fametrahana:

1. Vonoy ny hery: Locate the circuit breaker or fuse box that controls the power to the light fixture location. Turn off the power completely before proceeding.
2. Esory ny fitaovana efa tonta (raha ilaina): Carefully remove any existing light fixture, noting the wiring connections.
3. Manomana Wiring: If necessary, strip approximately 1/2 inch of insulation from the ends of the house supply wires.
4. Connect Wires:
   • Connect ny mainty tariby avy amin'ny fitaovana mankany amin'ny mainty (hot) wire from the ceiling box using a wire nut.
   • Connect ny fotsy tariby avy amin'ny fitaovana mankany amin'ny fotsy (neutral) wire from the ceiling box using a wire nut.
   • Connect ny varahina maitso na miboridana ground wire from the fixture to the varahina maitso na miboridana ground wire from the ceiling box using a wire nut.

   Ensure all wire nuts are securely tightened. Wrap electrical tape around wire nuts for added security if desired.
5. Mount Fixture: Carefully tuck all wires into the junction box. Align the fixture's mounting holes with the screws on the junction box or mounting bracket. Secure the fixture to the ceiling using the provided screws.
6. Install Glass Diffuser: Gently place the glass diffuser into the fixture and secure it according to the fixture's design (e.g., twist-lock, spring clips, or decorative nuts).
7. Ampodio hery: Turn the power back on at the circuit breaker or fuse box. Test the light fixture to ensure it functions correctly.

Image: A pair of Project Source 11-Inch Flush Mount Light fixtures. Each fixture features a brushed nickel base and a domed, frosted white glass diffuser, designed to provide soft, diffused light.

Torolàlana miasa

The Project Source 11-Inch Flush Mount Light is designed for simple operation. Once properly installed and wired, the light fixture is controlled by a standard wall switch connected to the circuit. Flip the wall switch to the "ON" position to illuminate the fixture, and to the "OFF" position to turn it off.

Note: This fixture uses integrated LED technology and does not require bulb replacement.

fikarakarana

To ensure the longevity and appearance of your light fixture, follow these simple maintenance guidelines:

• Fanadiovana: Alohan'ny hanadiovana, ataovy azo antoka fa tapaka ny herin'ny fitaovana amin'ny fiatoana. Ampiasao malefaka, maina, na kely damp cloth to wipe down the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
• Fikarakarana fitaratra: The frosted glass diffuser can be carefully removed for cleaning if necessary. Wash with mild soap and water, rinse thoroughly, and dry completely before reattaching.
• Tsy misy fanoloana takamoa: This fixture features integrated LED components. There are no bulbs to replace. If the light stops working, refer to the Troubleshooting section.

Fanamboarana

If your light fixture is not functioning as expected, consult the following common issues and solutions:

Raha mbola mitohy ny olana rehefa avy nanandrana ireo vahaolana ireo dia mifandraisa amin'ny elektrisianina mahay na mpanohana mpanjifa.

fepetra arahana

Warranty sy fanohanana

This product is a refurbished item. Please refer to the seller's specific return and warranty policy at the point of purchase for details regarding coverage and support for refurbished products. General support for Project Source products may be available through their official channels.

For technical assistance or further inquiries, please contact the retailer or manufacturer directly.